Products in Industrial Manufacturing: Waterborne Coating

DeCAL 1201 is a powder-grade rheological control additive that can be used in a wide range of water-based systems. The product is designed to disperse and rapidly wet out in aqueous systems. Alternatively, the product can be incorporated into powder blends and formulations.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

CoatOSil™ 7001 copolymer is an additive for improved flow and leveling of solventborne two-component acrylic-polyol isocyanate cured coatings. When CoatOSil™ 7001 copolymer is incorporated as a flow and leveling additive, the appearance and distinctness of image (DOI) of the clearcoat is typically excellent, compared to current commercial additives used in the fomulations discussed.

Omnistab MEHQ is an polymerisation inhibitor for UV/EB formulations.

SÜDRANOL® 200 is a waterbased polyethylene wax-compounddispersion for use in paint- and varnish-systems especially in gloss dispersion, lacquers and glazes. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

AGITAN 352 is a special composition with excellent stability and high efficiency. AGITAN 352 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

WÜKONIL® HS is a polymer wax-dispersion for waterborne coating systems.Properties and advantages are improves scrub resistance Improves slip Improves blocking stability Very low particle size. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Omnirad 73 is a highly efficient, low yellowing, Type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with mono or multi functional monomers as reactive diluents.

Omnistab OB is a fluorescent whitening agent for plastic, paint, ink and photographic paper. It is efficient and stable at high temperatures.

AGITAN 301 has little odor and taste. A non-ionic structure provides excellent compatibility with most common binders. It is recommended for biodegradable formulations.

Omnistab BP 12 UV light absorber is a derivative of 2 hydroxy benzophenone. It retards photo oxidative degradation and so helps prevent the discolouration and delamination of clear coatings.

AGITAN 307 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

Esacure KIP 75 LT is a liquid mixture of Esacure KIP 150 (75%) and Tripropyleneglycoldiacrylate(25%). It is an oligomeric polyfunctional α-hydroxyketone characterized by high reactivity and non-yellowing properties. It is particularly recommended when low odor is a required characteristic.

Omnistab IN 515 is an effective liquid polymerization inhibitor or storage stabilizer for photosensitive resins and monomers. It retards the self-polymerization of UV-coating and ink formulations during storage.

Omnistab PTZ is an polymerisation inhibitor for UV/EB formulations.

AGITAN E 255 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN E 255 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

Esacure KT 55 is a liquid mixture of Esacure TZT (50%) and Esacure KIP 150 (50%). IT is used in combination with a co initiator and is particularly suitable when high reactivity and low yellowing are required.

Omnistab 1130 is a liquid type UV absorber especially developed for coatings, and can be used in combination with hindered amine light stabilizers (HALS) such as Omnistab LS 292.

Omnirad 2100 is a highly efficient liquid curing agent to initiate radical polymerization of unsaturated resins after exposure to UV light such as those based on a prepolymer – e.g., acrylates and unsaturated polyesters – in combination with mono- or multifunctional monomers as reactive thinners. It is well suitable for formulations in which Omnirad TPO is used. Omnirad 2100 provides all the handling advantages of a liquid product. In thicker coatings Omnirad 2100 offers improved bottom curing compared with that of Omnirad TPO. It is especially suitable for white-pigmented formulations with minimal yellowing after curing and for coatings with low pigment volume concentration. Therefore Omnirad 2100 can be offered in almost all applications as a one-to-one replacement for Omnirad TPO with certain advantages.

Omnistab IN 516 is an effective liquid polymerization inhibitor or storage stabilizer for photosensitive resins and monomers. It retards the self-polymerization of UV-coating and ink formulations during storage.

Omnirad 819 is a versatile photoinitiator for radical polymerization of unsaturated resins upon UV light exposure. It is especially suitable for white pigmented Formulations, the curing of glass-fiber-reinforced polyester/styrene systems and for clear coats for outdoor use in combinations with light stabilizers. Thick section curing is also possible with this photoinitiator.

AGITAN 650 is an easily emulsifiable defoamer which can be used in pigmented as well as in clear and low viscosity systems. AGITAN 650 is an universal defoamer which is effective in all common aqueous emulsion systems and water reducible systems.

Omnistab IN 518 is an effective liquid polymerization inhibitor or storage stabilizer for photosensitive resins and monomers. It retards the self-polymerization of UV-coating and ink formulations during storage.

Omnivad SB Flakes is an organic filler. For absorbent substrates Omnivad SB Flakes can act as a hold-out additive, preventing low viscosity coatings or inks from soaking into the substrate. This additive will help with enhancing higher gloss, increase color strength and improve cure. This Resin is compatible with radically curable inks, coatings and adhesives.

Omnirad 4265 is a highly effective liquid photoinitiator blend, used for UV-polymerisation of suitable resins. Omnirad 4265 is easily incorporated into waterborne formulations.

AGITAN 305 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

WÜKONIL® HB 4000 is a wax-dspersion free of emulsifiers for application as additive in waterborne polymer systems.Properties and advantages are good hydrophobicity Improves early rain-resistance Improves \"antisticking\" Improves workability Reducing of skinning at thick coat systems. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Omnivad 280 is a radically curable silicone acrylate utilized in a broad array of UV/EB curable coatings and printing inks. Omnivad 280 provides superior substrate wetting and surface slip by reducing the surface coefficient of friction. It enhances durable anti-mar and anti-blocking performance.

Defoamer for water-based coating systems, silicone free. SCHWEGO foam 8013 is a highly effective defoamer suitable for water- based systems and adhesives especially for those based on polyurethane and acrylate.

Omnirad 81 is a eutectic photoinitiator blend of benzophenone and 4-Methylbenzophenone. Omnirad 81 is liquid at room temperature and has excellent solubility characteristics. The high photochemical efficiency of omnirad 81 makes it an ideal photo-catalyst for UV initiated formulations

WÜKONIL® PW is an aqueous dispersion for use in varnish- and paint systems WÜKONIL® PW is an aqueous dispersion for use in varnish- and paint system.WÜKONIL® PW modifies the following properties of paint- and varnish formulations:. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Esacure KIP 100F is a liquid mixture of Esacure KIP 150 (70% ) and Omnirad 1173 (30%) and is particularly recommended for high reactivity, low odor and color stability.

Omnirad MBF is a highly efficient, liquid, Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It forms free radicals through an intramolecular hydrogen abstraction process. The use of amines is not recommended as this may lead to efficiency decrease, stability upon storage issues or stronger odor. It can be used in combination with mono or multi functional monomers as reactive diluents

Omnirad 4PBZ is an effective Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

Omnistab IN 520 is an effective liquid polymerization inhibitor or storage stabilizer for photosensitive resins and monomers. It retards the self-polymerization of UV-coating and ink formulations during storage.