Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Building & Construction
Building Materials
Structural Components
Products in Structural Components
2,256 Products found in Structural Components
Suppliers
Product Families
Functions
End Uses
Chemical Family
Features
All Filters
Products
Brands
Suppliers
Formulations
Documents
Relevance
Fast Response Times
Fast Response Times
SDS
With SDS
TDS
With TDS
Polynt Group
NORSODYNE® W-154BR
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Processing Methods:
Continuous Lamination
End Uses:
Structural Components
Norsodyne® W-154BR - good transparency, UV stabilized, preaccelerated. Main applications areas are building and construction, home and domestic applications etc.
Nylene
Nylene® 9110
Polymer Name:
Polyamide 610 (PA 610)
Processing Methods:
Injection Molding
Flexural Modulus:
2035.0 - 2035.0 MPa
Nylene General purpose unreinforced nylon 6/10 injection molding grade Has heat and chemical resistance inherent in nylons, while also having the reduced moisture pick-up associated with nylon 6/10 Suitable for clips, bushings, housings, and other uses where moisture pickup may be a concern
Foundation Armor
Armor WL550
Ready-to-Use Product Type:
Sealer, Solventborne Coating
Compatible Substrates & Surfaces:
Concrete
Features:
Consistent High Quality, Low Absorption, High Gloss, Microbe Resistant, Mildew Resistant, UV Resistant, Low VOC, Breathable, Excellent Water Repellency , Durable
Application Method:
Roller, Spray
Armor WL550 Enhancer Sealer PRO is a solvent-based silicone water repellent sealer that will protect the surface from damage and deterioration caused by water absorption, and enhance it with a matte wet look finish. The WL550 Enhance Sealer PRO works entirely below the surface and will not leave behind a visible surface film. The WL550 is designed specifically for unsealed concrete, brick, pavers, and natural stone where a color enhancement is desired.
Elastron
SEBS - ELASTRON G500.A30.B.PA
Tear Strength:
10.0 - 10.0 kN/m
Strain at Break:
600.0 - 600.0 %
Compression Set (70 °C):
30.0 - 30.0 %
A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PA.
Polynt Group
POLYCOR® ISO BR WHITE 9199
Chemical Family:
Isophthalics
Functions:
Surface Finish
Color:
Transparent, Custom, Off White, White
Features:
Good Mechanical Properties, Improved Mechanical Properties
POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.
Fluorseals
fluteck™ K304
Polymer Name:
Polyetheretherketone (PEEK)
fluteck™ K304 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).
Polynt Group
DISTITRON® 152 A1MS
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
DISTITRON® 152 A1MS - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce agglomerated and engineered stones,furnitures and sanitary through casting,mix with fillers and/or additives method.
Elastron
SEBS - ELASTRON G300.A55.N
Tear Strength:
20.0 - 20.0 kN/m
Strain at Break:
800.0 - 800.0 %
Compression Set (70 °C):
46.0 - 46.0 %
A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.
Elastron
SEBS - ELASTRON G201.A60.B
Tear Strength:
32.0 - 32.0 kN/m
Strain at Break:
700.0 - 700.0 %
Compression Set (70 °C):
28.0 - 28.0 %
A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers high temperature resistance and excellent compression set with superior UV resistance.
Plastcom, spol. s r.o.
SLOVAMID 6 G 5
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Fillers Included:
Carbon Fiber, Graphite Fiber
Flexural Modulus:
2600.0 - 2600.0 MPa
PA 6 reinforced with graphite
Elastron
TPV - ELASTRON V206.D51.B
Density:
900.0 - 900.0 kg/m³
Tear Strength:
70.0 - 70.0 kN/m
Compression Set (70 °C):
57.0 - 57.0 %
A hard, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for low coefficient of friction requirements.
Dynasol Elastomers
Paracril™ BJLT-M30
Applications:
Equipment & Parts, Tires, Medical Devices & Assemblies
Product Families:
Nitrile Rubbers, Specialty Elastomers
Chemical Family:
Nitrile Rubbers
Polymer Name:
Acrylonitrile Butadiene Rubber (NBR)
End Uses:
Tires, Wires, Cables
Paracril BJLTM30 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.
Ria Polymers
RIALENE® P 100 SGF20plus ST natur
Polymer Name:
Polypropylene (unspecified)
Processing Methods:
Injection Molding
Additives Included:
Impact Modifier
Fillers Included:
Glass Fiber
RIALENE P 100 SGF20plus ST natur is in Granules, Natural Color. RIABLEND ® product line includes all plastic compounds that consist of at least two polymers. On the one hand, we combine polymers that can be easily combined with one another due to their chemical structure. On the other hand, our blends are also polymers that would not necessarily go together straight away, which we combine using a compatibilizer. With our egg-laying wool milk sow, you have a multitude of possible combinations - and thus also various properties of the plastics - at your disposal.
Elastron
TPV - ELASTRON V201.A65.N
Density:
970.0 - 970.0 kg/m³
Tear Strength:
24.0 - 24.0 kN/m
Compression Set (70 °C):
32.0 - 32.0 %
A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.
Soredi
NIRETAN B F10
Applications:
Other Electrical & Electronics Applications, Furniture, Other Industrial Applications
Product Families:
Polyamides, Engineering & Specialty Polymers
Chemical Family:
Polyamides
Polymer Name:
Polyamide 6 (PA 6)
End Uses:
Bushings, Bearings
NIRETAN B F10 is regionally available in Europe.
Haysite Reinforced Plastics
Haysite Reinforced Plastics 48600
Functions:
Molding Compound
Chemical Family:
Polyesters
Reinforcement Material:
Glass Fibers
Processing Methods:
Compression Molding
End Uses:
Terminal Blocks
Haysite Reinforced Plastics 48600 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.
Comco Nylon GmbH
Comco PA6G OL
Polymer Name:
Polyamide 6 (PA 6)
Additives Included:
Lubricant (Unspecified)
Comco PA6G OL is modified by incorporating a hybrid lubricant, which is distributed in the raw material in the form of microscopic droplets. This material is especially efficient in preventing the stick-slip phenomenon. It is perfectly suited to slow-moving unlubricated elements. Applications include bearing sleeves, leads and curve guides. Standard Comco PA6C OL is available in black and yellow, with further colors available on demand.
Polynt Group
NORSODYNE® 3320E
Polymer Name:
Polyester (unspecified)
Chemical Family:
Unsaturated Polyester (UPE), Polyesters
Processing Methods:
Hand Lay-up, Spray Lay-up
End Uses:
Tanks, Structural Components, Pipes
Norsodyne® 3320E - promoted and low styrene emission, low shrinkage, good water resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.
Elastron
SEBS - ELASTRON G500.A55.B.PA
Tear Strength:
23.0 - 23.0 kN/m
Strain at Break:
400.0 - 400.0 %
Compression Set (70 °C):
39.0 - 39.0 %
A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PA.
Elastron
SEBS - ELASTRON G100.A70.N
Tear Strength:
35.0 - 35.0 kN/m
Strain at Break:
750.0 - 750.0 %
Compression Set (70 °C):
50.0 - 50.0 %
A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.
Ecotechnilin
Ecotechnilin L-FLAXPREG T-UD-50-5m²
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Flax Fibers
Functions:
Prepreg
End Uses:
Skis, Tennis Rackets, Frames, Surfboards
Ecotechnilin L-FLAXPREG T-UD-50-5m² is a unidirectional (UD) fibers - FLAXPREG T-UD 50.
Rhino Linings USA, Inc.
Rhino Linings USA, Inc. 1320 Resin
Polymer Name:
Epoxy Resins & Compounds
Chemical Family:
Epoxy & Epoxy Derivatives
Processing Methods:
Vacuum Infusion Processing (VIP), Injection Molding, Resin Transfer Molding (RTM)
End Uses:
Tanks, Surfboards, Pipes
Rhino Linings USA, Inc. 1320 Resin is a Ultra Low Viscosity Epoxy Resin. Ultra low viscosity epoxy for infusion. Used for producing composite laminates using injection or vacuum infusion techniques at ambient temperature.
Seals Eastern
Seals Eastern Compound 7267
Polymer Name:
Ethylene Propylene Diene Terpolymer (EPDM)
Seals Eastern Compound 7267 is 75-duro EPM.
Polynt Group
Polynt Group 25
Functions:
Surface Finish
End Uses:
Tanks, Pipes
Features:
Low Smoke Emission, Flame Retardant
Polynt Group 25 series gelcoats are formulated from premium polyester resins and fire retardant additives to achieve optimal fire retardancy properties and low slow smoke development. They are suitable for applications requiring a surface with resistance to flame spread and smoke development.
CST The Composites Store
CST The Composites Store K111
Reinforcement Material:
Aramid (Kevlar)
Reinforcement Form:
Plain Weave Fabric
Features:
High Toughness, Excellent Toughness, Drapability
K111 is made up of a Plain Weave.
Texonic
Texonic TC-06-P
Applications:
Waterproofing & Weatherproofing, Building Envelope & Roofing, Roofing Sheets
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Pipe Repair, Roofing Membranes, Structural Parts
TC-06-P is a Carbon Fiber which is widely used fiber in high-performance applications, offering an astonishing range of properties.
Vertec Polymers
Vertec™ 5023
Polymer Name:
Polyetheretherketone (PEEK)
Fillers Included:
Proprietary
Flexural Modulus:
6890.0 - 6890.0 MPa
Vertec™ 5023 is a proprietary, bearing grade PEEK (polyetheretherketone) material developed especially for the canning industry. Tribological evaluations under dry running conditions have shown its friction coefficient and wear rate to be much lower than any other bearing grade PEEK composite material available in the market. It is more ductile and flexible than our top-of-the-line Vertec 5025 and Vertec 5028 allowing more of a softer contact surface against a variety of metallic counter-surfaces. At the PV values of 40,000 psi-fpm and higher, its coefficient of friction approaches that of unfilled PTFE. Also, the counter-surface wear is much less.
Polynt Group
DISTITRON® 458 EN2
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
DISTITRON® 458 EN2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,mix with fillers and/or additives method.
Techno Compound
Techno Compound PBT4 GF 20 Natural (9990)
Polymer Name:
Polybutylene Terephthalate (PBT)
Fillers Included:
Glass Fiber
Flexural Modulus:
6500.0 - 6500.0 MPa
Techno Compound PBT4 GF 20 Natural (9990) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.
Oil Center Research
Liquid-O-Ring® PM800
Ready to Use Product Type:
Lubricant
Application Area:
Pump, Cams, Chassis, Slides, Bearings, Ball Joint, Universal Joints
Compatible Substrates & Surfaces:
Metal
Features:
Good Adhesion, Corrosion Resistant, Good Cohesion, High Melting Point, Water Resistant, Tacky
Liquid-O-Ring® PM800 is a heavy-duty, high temperature, allpurpose lubricant. It is sightly tacky and has a high melting point of +500°F (260°C). PM800 is manufactured with slight adhesive and cohesive properties, allowing longer service intervals. PM800 forms a lubricating film that prevents metal-to-metal contact and reduces operating temperatures. It is water resistant and protects against corrosion as it lubricates.
Composite Essential Materials
NIDAPLAST® 8FR
Functions:
Core Material
Core Type:
Thermoplastic Honeycomb
NIDAPLAST® 8FR is V2 Classification according to UL94. The longevity for the core's storage is guaranteed by a anti U.V. - U.V. Protection of the finished panel is ensured by the skins of the sandwich panel. With behavior of fire it has excellent resistance to water and most acids, bases and salt solutions.
ISOMATEX SA
FILAVA™ WF BSB3_160.XXX.0127.T2/2.ISAA
Applications:
Technical Fabrics, Textile Manufacturing, Renewable Energy
Product Families:
Other Reinforcements, Reinforcements
FILAVA™ WF BSB3_160.XXX.0127.T2/2.ISAA continuous filament for technical textiles and high-performance composites.
Elastron
SEBS - ELASTRON G300.A55.B
Tear Strength:
20.0 - 20.0 kN/m
Strain at Break:
800.0 - 800.0 %
Compression Set (70 °C):
46.0 - 46.0 %
A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.
Polynt Group
NORSODYNE® H 13157 TAE
Polymer Name:
Polyester (unspecified)
Chemical Family:
Unsaturated Polyester (UPE), Polyesters
Processing Methods:
Hand Lay-up, Spray Lay-up
End Uses:
Tanks, Structural Components, Pipes
NORSODYNE® H 13157 TAE - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through hand lay up and spray up method.
Elastron
TPV - ELASTRON V100.A75.N
Density:
960.0 - 960.0 kg/m³
Tear Strength:
41.0 - 41.0 kN/m
Compression Set (70 °C):
44.0 - 44.0 %
A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for injection applications.
Aliancys
Synolite™ 0152-N-2
Polymer Name:
Polyester (unspecified)
Chemical Family:
Isophthalics, Polyesters, Unsaturated Polyester (UPE)
Processing Methods:
Pultrusion
Show
36
of 2,256 results
Go to page
1
2
3
4
5
6
7
8
9
10