Products in Other Flooring & Surface Applications: Plasticizer

Paychlor K-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor K-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor K-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor D-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

GuangDong Sky Bright TXIB is a superior primary plasticizer for PVC. it is typically used to replace some portion of the general-purpose plasticizer included in flexible PVC. The inclusion of TXIB plasticizer reduces the viscosity of PVC plastisol's and imparts many other valuable features, such as stain resistance and a less sticky surface than those produced with the industry standard plasticizer, DOP. TXIB has about the same efficiency as DOP, so it is generally used to replace some portion of the DOP on 1:1 basis. It is suitable for the manufacture of toys, sheet vinyl flooring, and many other high quality vinyl products.

Elafleks® DINP (Diisononyl Phthalate) is used as a softener in all PVC paste and pulp mixtures. Used in all calendaring systems, automotive sector, cable production, synthetic leather production, bookbinding fabric production, PVC and Floor Covering production.

Natro-Cel 97-A is an aromatic hydrocarbon, silicon-dioxide blend plasticizer/processing aid for NR, SBR, CR, IIR, NBR, BR, EPM, and EPDM. It aids filler dispersion, and gives rapid incorporation. Large loadings may retard cure slightly. Small Mooney viscosity reduction.

Paychlor D-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Natrochem DBP DLC-A is a dibutyl phthalate, silicon-dioxide blend polyisobutylene plasticizer for NR, SBR, CR, NBR, IR and IIR. It gives rapid incorporation, aids dispersion of fillers, and reduces pigment requirements in colored stocks.

Paychlor D-58 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Hairma Chemical (GZ) Epoxy Soybean Oil for Epoxy Acrylate HM-01R-PU has high epoxy value, less impurities and high reactivity. It is a directional reaction type epoxy soybean oil, which can effectively reduce the generation of by-products. It is developed for acrylic and UV light-curable resins.

Natrochem DOP DLC-A is a Di-octyl phthalate-silicon dioxide blend plasticizer for NR, SBR, IIR, IR, polyisobutylenes and chlorinated polyethylenes. Large additions may retard cure slightly. Incorporates rapidly; reduces pigment requirements in color stocks; aid filler incorporation.

Maureen is a new generation Makwell Plasticizers Non Phthalate Plasticizer and is light yellowish in color, It has an Excellent compatibility with PVC resin when used along with other primary plasticizers such as DOP/DPP/DPHP/TOTM/DOA and secondary plasticizers such as Chlorinated Paraffin.

UniHydro® UN899, Diisononyl cyclohexane-1,2-dicarboxylate, is a non-phthalate plasticizer. It is clear and odorless just like water and widely used in PVC products. Due to its non-benzene and non-toxic nature, it provides better safety assurances. It is especially suitable for human contact products such as medical devices, children's toys, food packaging and flooring.

Paychlor D-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor S-68 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Natro-Cel 6102-A is a naval stores-based NR, SR plasticizer, softener. Aids extrusions and processing; renders stocks tacky. Has no effect on cure rate. Prevents scorch.

Tar-Cel 30-A is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar and gives easier, faster, more accurate weighing.

Paychlor S-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor S-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Natrochem DOA DLC-A is a di(2-ethylhexyl) adipate, silicon-dioxide blend plasticizer for NR, NBR, CR, and chlorinated PE. It gives good low temperature properties, excellent incorporation and easy handling.

Natro-Cel R-A is a blend of sodium sulfonate and selected process oils on silicon dioxide. Used as an effective dry-form plasticizer and processing aid for NR, SBR, IR, and IIR. Suggested for open-roll mill mixing and used in emulsification, corrosion and wetting applications.

Paychlor D-55 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Plasticizer SC DLC-A is a diester of triethylene glycol, silicon-dioxide blend plasticizer, and softener for NR, SR's. Gives low temperature flexibility; improves processing.

Paychlor D-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Indo-Nippon Chemical Di -n- Hexyl Phthalate (DnHP) is a highly efficient primary plasticizer that offers unusually good processing features such as fast fusion performance, low temperature processing, efficient foaming, etc., It also imparts low temperature flexibility. It is compatible with commonly used plasticizers for PVC to manufacture calendars, floor coverings, and adhesives. DnHP is also used for nitrile rubber, acrylic coatings and for polysulfide sealants.

Tar-Cel 14-A is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar; gives easier, faster, and more accurate weighing.

Paychlor S-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor S-58 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor D-42 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

IPPP35 is halogen‐free flame retardant phosphate ester plasticizer, the two will not pollute the environment; in the viscosity of the phosphate species is the lowest, the highest phosphorus content of a model. This product is colorless and transparent, good compatibility, but also by both flame‐retardant plastic, flame retardant and plasticized material in between play a balancing role, so raw materials can change their character and physical properties, widely for fabric coating, circuit boards, flooring, textiles, PVC, phenolic resin, and other fields.

Natro-Cel 6400-A is a blend of glycol adipate and silicon dioxide. It functions as a plasticizer with low odor, low volatility and good compatibility.

Flexricin P4 DLC-A is a methyl acetyl ricinolate silicon dioxide blend plasticizer and processing aid for low temperature specification rubber compounds. Low volatility.

Paychlor K-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor K-58 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.