Products in Tubing & Fluids Handling: Polyamide 6 (PA 6)

Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections Specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

Nylene Heat stabilized version of NYLENE 600 which is a general purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 480°F - 500°F at the die

Nylene Very high viscosity extrusion resin having an ASTM relative viscosity of 800 Excellent structural strength, durability, and physical properties Good melt strength and good draw-down properties which promote dimensional control for extrusion of pipe, tubing, film, and sheet Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles Optimum processing conditions should permit for a melt temperature of 550 - 575°F at the die.

Nylene General purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 481°F - 500°F at the die

Nylene High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black 2407 HSSP is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts

Modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles Especially useful for convoluted tubing

Nylene Nylene PX1719HS is a heat stabilized, high impact, nylon 6 extrusion grade resin with a low flexural modulus. PX1719HS is ideally suited for extrusion of tubing and profiles requiring outstanding toughness and flexibility. Because of its excellent flow characteristics, it may also be used for injection molding parts requiring a high Izod impact value. Optimum processing conditions should provide a melt temperature of 520 - 540°F at the die or nozzle.

Nylene Heat stabilized nylon 6 copolymer for both extrusion and injection molding Exhibits excellent flexibility and impact resistance in addition to the heat and chemical resistance of nylon 6 resins Suitable for flexible tubing and overmolding extrusions as well as molding applications that require maximum flexibility from a nylon type resin

Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections 2403 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

Grupa Azoty S.A Tarnamid® T-27 GF30 V2 is a Polyamide 6 (Nylon 6) material filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Tarnamid® T-27 GF30 V2 are: Flame Rated Chemical Resistant Fatigue Resistant Flame Retardant Food Contact Acceptable Typical applications include: Automotive Engineering/Industrial Parts Construction Applications Electrical/Electronic Applications Fabrics/Fibers

Nylene Nylon 6 polymer designed for use in extrusion of tubing and film to be used in food packaging. High melt strength for shape retention Like most PA6, Nylene 615 NP has excellent grease resistance, toughness, and resistance to abrasion.

Nylon 6 - Mighty Tough plasticized extrusion grade for tubing/profile applications.

Nylene High viscosity nylon copolymer with enhanced impact and high flexibility Optimized with good melt strength for high line speeds in thin wall sections 2409 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

Nylene Designed for use in extrusion of Tubing and Film Excellent grease resistance, toughness, and resistance to abrasion Films made from NX4797, have good barrier properties against Oxygen and Aroma typical of PA6 Meets FDA 21 CFR 177.1500 food contact requirements

Nylene High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections 2415 HSSP BK is one of a family of grades specifically designed for the convoluted tubing used n the Automotive and Electrical industry, but can also be used for other extrusions and some molded parts.

Nylene Highly impact modified nylon 6 resin. PX1719 has very low stiffness for a nylon type resin Can be processed by either injection molding or extrusion Suitable for clips, fasteners, and also tubing and profiles, or any other uses where high impact resistance and maximum flexibility are required

Modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles Especially useful for convoluted tubing.

Grupa Azoty S.A Tarnamid® T-27 MK30 is a Polyamide 6 (Nylon 6) material filled with 30% mineral. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Tarnamid® T-27 MK30 are: Chemical Resistant Fatigue Resistant Flame Retardant Food Contact Acceptable Good Esthetics Typical applications include: Automotive Engineering/Industrial Parts Construction Applications Electrical/Electronic Applications Fabrics/Fibers

Tarnamid® T-27 GF30 V0 is a polyamide 6 containing 30% glass reinforced, heat stabilized, flame retardant.

High viscosity polyamide 6. ISO 1874-1: PA 6, MN, 22-030

Nylene Nylene NX1170 is a high viscosity, extrusion grade resin containing 5% molybdenum disulfide for improved wear resistance. The abrasion resistance of nylon 6 is enhanced by the addition of molysulfide. Because of its high melt viscosity, NX1170 can be extruded into rods, tubing, thin films, many complex shapes.

Nylene Plasticized, high residual monomer resin designed for extrusion applications requiring excellent flexibility, high strength and good abrasion resistance Applications include flexible tubing, cable jacketing, and mono-filament extrusion such as fish line and netting, sewing thread, and weaving thread Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die.