Products in Tubing & Fluids Handling

Fainplast Compounds Fainplast™ PVC MPH 62/OP is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 62/OP include medical/healthcare, engineering/industrial parts and hose/tubing.

Tygon B-44-4X is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon B-44-4X include food contact applications, hose/tubing and plumbing/piping/potable water.Characteristics include: Low to No Odor/Taste Chemical Resistant Clarity Good Flexibility Non-Toxic

Guarniflon TEKCLEAN/ANTIBACTERIAL is a wide range of PTFE grades - virgin and compounded - certified and approved according to international standards for food and drinking applications. A wide range of virgin and filled PTFE grades certified and approved according to international standards for applications in the food and drinking water sectors.

LIM™ 6040 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 1500C (3020F) to 2050C (4000F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

TUFFALLOY 4270 is a series of Liquid Molding Compounds with thermoplastic properties such as high impact, high heat distortion, and low viscosity. This unique chemistry developed by Hapco to meet today's market demands for prototype and low production parts needs.THE TUFFALLOY 4270 Series are available in (4) speeds.The user has the ability to use different speeds of TUFFALLOY 4270, typically using a slower speed initially and increasing to a fast set, 1 minute working life.PROCESSING: TUFFALLOY 4270 Series can be pressure cast, vacuum cast, or open cast. For best results, TUFFALLOY 4274/75 should be used with Hapco's metering/dispensing equipment, RAPIDFIL, MINI FIL, and RAPIDSHOT.

KPC® KLC-55 by Kadakia Plastics and Chemicals is a general purpose, flexible polyvinyl chloride (PVC) grade. Is suitable for processing by profile extrusion. Possible applications of KPC® KLC-55 could be complex profiles & shapes, sleeving, hose tubing, tapes & fiber coating and molding applications such as electrical plugs, handles and intricate parts.

Tygon S-54-HL is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon S-54-HL include medical/healthcare and hose/tubing.Characteristics include: Low to No Odor/Taste Non-Toxic

Pertac/GR is a multifunctional process aid based on 1.2-polybutadiene converted into free-flowing granules.

Tygon SE-200 is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon SE-200 include food contact applications, medical/healthcare and hose/tubing.Characteristics include: Low to No Odor/Taste Chemical Resistant Clarity Good Flexibility

Polyplastics Group Topas® 6017S-04Product DescriptionTOPAS 6017S-04 is an injection molding grade with a high heat distortion temperature (170°C) and exceptional dimensional stability. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for precision optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has excellent heat resistance to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Precision componentry Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware High Temperature Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Dimensional stability, high tolerances Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6015S-04 - high heat distortion resistance (150°C) for 134°C protocols Topas® 6017S-04Topas® 6017S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Tygon R-1000 is a Polyvinyl Chloride product. It is available in North America. Typical application: Hose/Tubing.Characteristics include: Corrosion Resistant Low to No Odor/Taste

Sylvin Technologies Sylvin™ 5132-70UV Clear is a clear vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound contains an ultra violet stabilizer and can be color matched to a variety of colors.

Fainplast Compounds Fainplast™ PVC MPH 73 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 73 include medical/healthcare and hose/tubing.

Silanogran Silanogran SI-69/GR 70 offers improvement of mixing properties e. g. reduction in Mooney viscosity, better processability when mixing, calendering and extruding and influences the physical-mechanical data of the vulcanizates favorably.

S V Plastochem Calcium Zinc (Liquid) is used in food grade transparent rigid/ soft applications, medical applications.

Elastocon® 8038N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8038N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8038N can be overmolded to polypropylene.Elastocon® 8038N is supplied as ready to use pellets in 50 lb. bag quantities.

TheAddisil™ IND 2060 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

GREENSTAB® MC-100 is used by PVC Pipe Manufacturers,PVC Accessories Manufacturers,PVC Cable Manufacturers.

Kettlitz-Mediaplast NB-7 is a special diisononyl dicarboxylic acid ester which can replace existing phthalate plasticizers in compounds based on polar rubbers like NBR, HNBR, CR, ACM, VAMAC etc. Mediaplast NB-7 shows minor volatility at an extremely low setting point. Therefore this plasticizer is suitable to produce rubber articles with high heat resistance and excellent low temperature propertiesas well.

Nanjing Shuguang Chemical Group Antioxidant SG-R 405 is one kind of highly effective, odorless, nontoxic general rubber antioxidant, and has small pollution among the amine antioxidants. Applied to natural rubber and chloroprene, SBR, isoprene, NBR, and so on, it can effectively protect from aging caused by heat, light, ozone, flex-fatigue and cracking. It has a good synergetics with sulfur-containing antioxidant. In contrast to other general antioxidants, SG-R 405 has an inimitable advantage when used in plastic and electric wire and cable, food packing material, adhesives, especially in chloroprene rubber and food packing, medical and health care product as rubber parts, light or garish colored rubber products, in the advanced rubber electric cable as well as the polyether, in advanced lubricating oil. Therefore, it is the ideal substitute of the antioxidant A, antioxidant D,, RD, 264, 4010, SP, WH-02, and the recommended dosage amount is 0.5-2%.

Miracll Chemicals E 90 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

The Addisil™ 482 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

Sylvin™ 86045-60HMW Clear Yellow 4172 is a vinyl compound formulated for chemical resistant tubing. This compound contains 50% less barium and zinc.

Fainplast Compounds Fainplast™ PVC MPH 73/GT 1 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 73/GT 1 include hose/tubing and medical/healthcare. The primary feature is sterilizable.

Polyimide /PI Glide™ Tubing is a class of high performing polymers well established in industry for their outstanding chemical, thermal, and mechanical performance properties. Polyimides typically do not melt before decomposing; thus, they demonstrate excellent thermal stability in high as well as low temperatures. Polyimides also exhibit good dielectric properties giving them substantial presence in a number of electrical applications. Zeus polyimide tubing brings these properties and more for both medical and non-medical precision tubing applications. Polyimide tubing provides excellent strength and abrasion resistance. Polyimide tubing also maintains its properties even at very small dimensions. For applications where additional lubricity is needed, PI Glide™, a PI / PTFE composite, provides a lower coefficient of friction for reduced surface resistance of the tubing. Zeus polyimide tubing is also available in a layered or composite construction using a combination of PI and PI Glide™ to suit a variety of tubing requirements. Mechanical properties, lubricious surface, and many other tubing properties can be tailored in this way. Choosing Zeus PI and PI Glide™ tubing for your catheter construction needs allows users to consolidate their components with a single best-in-class supplier.

PHOENIX™ 02851 is an excellent scratch resistance for bonding with polypropylene and RoHS compliant. It is conform to FDA and suitable for medical tube with tools grip syringe stopper.

Rulon® 1337 is a tan material made entirely from FDA compliant components. It has excellent physical properties and is chemically compatible with most chemicals, except concentrated sulfuric acid. This offers much flexibility in wash-down environments of food and pharmaceutical processing environments. It has a slightly lower coefficient of friction than Rulon J, offering extended life and less abrasion with softer mating surfaces. It is compatible with most commercially available natural lubricants for additional reduction in friction.

PHOENIX™ 04351 is a Low melt flow index. RoHS compliant. Conform to FDA. Suitable for extrusion, cable and wire sheath, medical tube, film.

Nylene Nylon 6 polymer designed for use in extrusion of tubing and film to be used in food packaging. High melt strength for shape retention Like most PA6, Nylene 615 NP has excellent grease resistance, toughness, and resistance to abrasion.

Tygon B-44-4X-I.B. is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon B-44-4X-I.B. include food contact applications, hose/tubing and plumbing/piping/potable water.Characteristics include: Low to No Odor/Taste Chemical Resistant Clarity Good Flexibility Non-Toxic

Silopren™ LSR 4070 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4070 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 4070 are distinguished by the following properties: Excellent biocompatibility High stability to ozone and ultraviolet light Neutral odor and taste Sterilisable with ethylene oxide, steam and gamma radiation Good transparency High thermal stability High recovery after puncture Easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4070 is particularly suitable for the following elastomeric articles: sealing elements, respiratory devices, vibration dampers, tube connectors, pipette nipples, catheters, parts for medical technical equipment, mats s.o.

LIM™ 6050 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6050 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150C (302F) to 205C (400F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.

Nylene High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections 2415 HSSP BK is one of a family of grades specifically designed for the convoluted tubing used n the Automotive and Electrical industry, but can also be used for other extrusions and some molded parts.

KD Chem LX-400 is Provide excellent heat stability, lubrication, and weatherability. One-pack type stabilizers for flexible and semi-rigid applications with fast gelling speed. Improved heat stability when used with epoxidized soybean oil. LX-824 is economical.

Kezadol PCI is a surface treated calcium oxide powder for use as an effective desiccant. The calcium ox-ide is coated by a chemically indifferent hydrocarbon. Due to this preparation Kezadol PCI has a reduced air pollution. Additionally there will not be any unintended reaction with humidity.

Sylvin Technologies Sylvin™ 5132-75UV Clear Pink 6277 is a clear vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound contains an ultra violet stabilizer.