Products in Paper & Pulp: Epoxy & Epoxy Derivatives

Ply-Guard ME is a two-component, chemical resistant Mastic Epoxy coating system designed to perform exceptionally well in a broad range of severe environments, including in the presence of strong acids/alkalis and organic solvents. It can be used as a primer and should be used wherever chemical and abrasion resistance and outstanding adhesion are essential. Ply-Guard ME is designed for use on properly prepared concrete and metal surfaces in refineries, offshore platforms, chemical plants, food and beverage plants, and pulp and paper mills.

Sino Polymer MFE 711, formerly known as MFE-11, is a premium standard Bisphenol-A type epoxy vinyl ester resin. It provides resistance to a wide range of acids, alkalis, bleaches and solvents used in many chemical processing industry applications.

SAUEREISEN Fast-Trak NovolaK Glaze 229 is a coating system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. FastTrak has the chemical resistance to withstand bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and chests in paper mills. Depending on the chemical and temperature environment, Fast-Trak is available in either vinyl ester or novolak epoxy formulations which are used with an appropriate Sauereisen Primer.

Madewell® 927™ is a two component penetrating epoxy primer and sealer for porous substrates such as wood, concrete, and other cementitious surfaces. Madewell® 927 is 100% solids, thereby providing a safer working environment. It also has a very low viscosity, which permits easy mixing, application, and deep penetrating action into porous surfaces. Madewell® 927 can be applied to damp surfaces; its unique chemistry permits rapid displacement of substrate moisture and excellent adhesion. In addition, the applied system increases the tensile, compressive, and impact strengths of the substrate. It may be used in a variety of applications, including the sanitary sewer, pulp and paper, chemical processing, steel, metal finishing, and refining industries. Madewell® 927 is recommended as a concrete primer under many Madewell® epoxy coating systems.

Poly Lining Systems PLS 477FC is a fast cure polyamide epoxy with high solid content which is capable of achieving a high build. It is designed for application to concrete and steel substrates. Steel substrates do not require extensive preparation prior to application. PLS 477FC is a semi-gloss material which can be provided in a wide range of colors. Not for use in potable water applications.

Epoxy Acrylate Oligomers

Ply-Guard NS is a two-component, chemical resistant, non-skid epoxy coating system designed to perform exceptionally well in a broad range of severe environments, including in the presence of strong acids/alkalis and organic solvents. It should be used wherever non-skid properties, chemical and abrasion resistance, corrosive environment resistance & outstanding adhesion are essential. Ply-Guard NS is designed for use on properly prepared concrete and metal surfaces in refineries, offshore platforms, chemical plants, food & beverage plants, and pulp and paper mills.

PERMACOAT 3000 is a 100% solids floor coating. PERMACOAT 3000 can be utilized as a glaze coat for the PERMATEC high build floors, or as a two-coat flooring or containment system (30 - 80 mils). When applied as a two-coat floor or containment system, a silica broadcast is used between coats. PERMACOAT 3000 consists of two components, resin and hardener, in both the horizontal and vertical formulations. Its application is accomplished with rubber squeegees and short nap paint rollers.