Products in Packaging Coatings: Acrylics

ADD-5765 is a wetting and dispersing additive for enhancing the dispersion of inorganic pigments and stabilizing the suspension of special effect pigments in solvent-based media. It is designed to prevent flooding and floating and hard sedimentation. ADD-5765 can be used in coatings and printing inks.

MPD Industries UVP 0206 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a low odor and good flexible monomer. It is compatible with a wide range of acrylated resins.

Soyanol™ 1000E is water-based additive for paints or stains, highly compatible with many chemistries, including most latex, acrylic and urethane emulsion systems, it helps develop high stability emulsions, increases open times, improves freeze / thaw performance over industry leading coalescents, also does double duty as coalescent and plasticizer, it is efficient and cost effective solution which has typical usage 2%-7%.

Finma-Sil 8-RX are aqueous matting agent concentrates with a very broad compatibility in all tested water-based systems, including acrylate and polyurethane dispersions.

Finma-Sil 15-FX are aqueous matting agent concentrates with a very broad compatibility in all tested water-based systems, including acrylate and polyurethane dispersions.

Kronphos PZC contains the optimal ratio of zinc, phosphorus and calcium, and is in great demand with consumers. It is used for manufacturing of corrosion-resistant materials to provide long-term protection against corrosion.

Jiangsu Sanmu 760 has light color, ligh luster, good compatibility, high hardness, good dryness, high scratch resistance, good storage stability and excellent chemical resistance. It can be applied with alcohol acid, acrylic acid and other resin together. It applies to higher-grade matte paint and wood coatings primer, plastic paint, industrial paint, etc.

The PanTINT® 81 Series are volumetric / gravimetric factory colorants for solvent-based industrial maintenance, general industrial finishes and wood coatings. The PanTint® 81 Series are prime examples of optimized dispersions, rendering the maximum color value of each color pigment. As with the other PanTint® Series of products, you can expect broad compatibility with a wide range of resin systems. The pigment selections are selected based on performance requirements often seen in industrial applications; colorfastness, weather and chemical resistance.

Finma-Sil 8-BX are aqueous matting agent concentrates with a very broad compatibility in all tested water-based systems, including acrylate and polyurethane dispersions.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

Micronized Products Mica 40# range of products are obtained as a co-product from the pegmatite ore at our mining operation situated in the Limpopo Province in South Africa. After separation the Mica is delaminated, screened, milled and classified to specific size specifications.

MPD Industries UVP 0201 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is compatible with a wide range of acrylated resins. It is low odor and good flexible monomer.

Kronphos CP is an inorganic white pigment; it is used in paintwork products to enhances anti-corrosion properties and adhesion strength. Thanks to the lamellar structure of the pigment particles, the barrier-layer effect of the coating is enhanced on the anodic area.

DISPHERHIC D CHROMA WHITE PW 6 colorant is specifically designed for tinting high performance, non-aqueous, industrial and maintenance coatings. It is based on an unique universal resin technology (modified Ketone Aldehyde).

Michem® Lube 160RPH is APEO-free and formaldehyde-free slip additive made from renewable materials allowing to control the coefficient of friction. This additive enters the formulation of acrylics, PVdC and Michelman low temperature heat seal coatings without affecting bond strength, printability and barrier properties of the coatings. Michem® Lube 160 RPH fully complies with FDA and EU food contact regulations.

ADDAPT_x0001_ PolySurF HPm is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate. It has a higher mono-content compared to PolySurF HP

V-TAC™ 7901 dispersion is an aqueous, 53% solids, solvent-free anionic hybrid dispersion compatible with the following latexes: acrylic, styrene-butadiene rubber, polychloroprene and natural rubber. V-TAC™ 7901 enhances adhesion and is especially recommended for acrylic latex systems. V-TAC™ 7901 offers an excellent balance of adhesion for polyolefin substrates and recycled corrugated.

Razeen® SL 4150X90 is a semi-solid epoxy resin based on Bisphenol A as solvent cut 90% in Xylene. Razeen® SL 4150 X 90 solvent cut exhibiting relatively low viscosity and low solvent retention at cured films. The mechanical properties and chemical resistance depending on the binder used in the formulation are outstanding.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

NovoColor® SF 8115 is a line of highly transparent waterborne pigment dispersions offering excellent color stability and exterior durability. These colorants are capable of matching all types of wood stain colors. NovoColor® SF 8115 colorants are compatible in acrylic emulsion and waterborne or water-dispersible alkyd stains, as well as waterborne coatings for plastics. This product line is for In-Plant and specialty industrial wood stains and coatings, wood graining inks, specialty inks, fabric, plastic, foil, paper, glass, and concrete coatings.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

NovoColor® SF 8194 is a line of highly transparent waterborne pigment dispersions offering excellent color stability and exterior durability. These colorants are capable of matching all types of wood stain colors. NovoColor® SF 8194 colorants are compatible in acrylic emulsion and waterborne or water-dispersible alkyd stains, as well as waterborne coatings for plastics. This product line is for In-Plant and specialty industrial wood stains and coatings, wood graining inks, specialty inks, fabric, plastic, foil, paper, glass, and concrete coatings.

The PanTINT® 81 Series are volumetric / gravimetric factory colorants for solvent-based industrial maintenance, general industrial finishes and wood coatings. The PanTint® 81 Series are prime examples of optimized dispersions, rendering the maximum color value of each color pigment. As with the other PanTint® Series of products, you can expect broad compatibility with a wide range of resin systems. The pigment selections are selected based on performance requirements often seen in industrial applications; colorfastness, weather and chemical resistance.

SNCZ Zinc Phosphate PZ20 is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as coil coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. Thanks to its low solubility, Zinc phosphate PZ20 is compatible with a wide range of solvent and water based resins.

POLIMER 4008 is a epoxy-acrylate oligomer with 20 % TMPTA.

The PanTINT® 81 Series are volumetric / gravimetric factory colorants for solvent-based industrial maintenance, general industrial finishes and wood coatings. The PanTint® 81 Series are prime examples of optimized dispersions, rendering the maximum color value of each color pigment. As with the other PanTint® Series of products, you can expect broad compatibility with a wide range of resin systems. The pigment selections are selected based on performance requirements often seen in industrial applications; colorfastness, weather and chemical resistance.

DISPHERHIC D CHROMA HS RED PR 254 colorant is specifically designed for tinting high performance, non-aqueous, industrial and maintenance coatings. It is based on an unique universal resin technology (modified Ketone Aldehyde).

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

Winlex 4025 is a low softening point rosin ester with good stability and mild odor. It is easily emulsified in water by conventional means. The principal uses for this resin are in the formulation of oil varnish, lacquer, hot-melt, heat-sealing, and pressure-sensitive adhesives. It has a suitable FDA status for use in food packaging applications covered by 175.105.

PRETIOX RGZW is a micronized rutile titanium dioxide with an organic and special inorganic surface treatment with aluminum and zirconium compounds, with aluminum ion modification in the crystal structure.

Wayncor™ 226 - Corrosion Inhibitive Pigment is a premium multi-component corrosion inhibitor pigment that comprises distinctly different inhibitive species to provide a high degree of corrosion protection on ferrous substrates. Although versatile it is highly recommended for water based acrylic primers where a high degree of corrosion resistance is required. Typical use level is between 3 – 7% total formula weight.

Wayncor™ 211 is an anti-corrosion inhibitive pigment that is very effective in solvent and water based epoxy primers. It does not affect the pot life of 2K systems. It can also be used alone or as a synergist with Zinc Phosphate. Typical use level is between 3 – 7 % total formula weight.

ADD-3777 is a silicone-free additive having high molecular weight and very broad compatibility. It is designed to reduce the surface tension of various resin systems at substrate interface, which will improve substrate wetting and leveling and prevent formation of craters without stabilizing foam. The additive provides “long wave” leveling performance and increases gloss of the coating system and does not cause any inter-coat adhesion problems. It is highly effective in the transportation coatings when combined with the silicone-based additive ADD-3031. ADD-3777 is suitable for coatings and printing inks.

CURING AGENT W3 is a liquid polyisocyanate, emulsifiable in water. Acrylic and PU dispersion polymers can be efficiently cross-linked with this product.