Printing & Packaging
19,242 products found in Printing & Packaging
VynoKlear is a high molecular weight vinyl chloride homopolymer produced by a suspension process with no addition of antioxidant. After mixing with appropriate additives, VynoKlear is suitable for extrusion, calendering or injection molding of semirigid and flexible PVC. Its superior porosity, compatibility, and transparency make it ideal for clear medical products, waterproofing membranes, and innovative flexible consumer goods and cables.
ISOFOL 28 is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-dodecyclhexandecanol and is also referred to as C28 Guerbet alcohol.
DYTEK® DCH-99 (1,2-diamainecyclohexane) is a cyclic aliphatic diamine made of 100% reclaimed material that is used primarily in epoxy coatings and composites. It provides chemical resistance over a broad range of chemicals, which makes it a superior choice for industrial and marine coatings. Other applications include mining, oil & gas, and pharmaceutical intermediates.
DYTEK® BHMT (bis-hexamethylene triamine) is a long chain triamine that is used as a binder in asphalt, as a phosphonate scavenger and flocculant in oil & gas applications, and as a hardener in epoxy coating and adhesive applications.
ISOFOL 24 is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-decyl-1-tetradecanol and is also referred to as C24 Guerbet alcohol. For documents specific to a region, please contact Sasol using the 'Request Document' button.
SASOLWAX SPRAY 105-G EF
SASOLWAX Spray 105-G EF is extra fine micronized FT Hardwax no softening in thin film solvent-based formulations, flexographic and paste inks and can coatings.
BHT is a hindered phenolic antioxidant/preservative that is used widely in Plastics, Elastomers, Lubricants, Oils and Food applications. BHT can be stored, transferred, processed and disposed of safely when proper procedures and safeguards are employed in industrial use. For documents specific to a region, please contact Sasol using the 'Request Document' button.
Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.
AdvanSix Acetone NF Grade
AdvanSix High Purity Acetone NF Grade meets or exceeds certification requirements of the National Formulary. It is produced to the highest standards for key industries, including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare. Offering low impurities, low Benzene, and low water content, AdvanSix High Purity Acetone NF grade can be used as an intermediate in the production of:Building and ConstructionConstruction and repair adhesives, exterior insulation and finishing systems, glazing and window elements, pipe and plumbing cement systems, and roofing sealants and caulks.Agriculture & Feed Agricultural pest control and industrial weed and vegetation control products.Automotive & TransportationAutomotive aftermarket parts, exterior and body parts, interior parts and lighting, and coatings for aerospace, automotive OEM, marine, rail, mass transit, off-road and commercial vehicle applications.Electrical & ElectronicsDevices and assemblies for automotive and consumer electronics, packaging and assembly adhesives and sealants, printed circuit boards, and other semiconductor manufacturing applications.Healthcare & PharmaOral and dental drug delivery solutions, tubing and fluid handling equipment, excipients, coatings and processing aids and nail care applications.Paints & CoatingsArchitectural coatings, decorative paints, wood coatings and finishes, flooring and surface coatings, infrastructure coatings and markings, and packaging coatings for film and foil, overprint varnishes, primers and lacquers, and other aerosol coating applications.
Mitsubishi Chemical Group
jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. Features Polymer-type epoxy resin with epoxy functional groups at the both ends High molecular weight High softening points Good adhesion Applications PCM, CAN and other coatings Paint Thermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
Aegis® H155C1ZP is a high-viscosity nylon extrusion grade copolymer for cast or blown film applications. It possesses an attractive combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.
Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.
Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.
Modaflow® 2100 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces pinholes, fish eyes, craters, and orange peels, improves substrate wetting, aids in air release, and facilitates pigment dispersion.
Capran® 1000 is a 0.39 mil (10 micron) biaxially oriented nylon 6 is suitable for packaging applications that demand optimum protection and performance. It offers a high gas barrier, excellent toughness and puncture resistance, optical clarity, and exceptional flex crack resistance and optics.
Chandra Asri Petrochemical
Trilene PP® HI10HO
Trilene HI10HO is a polypropylene homopolymer for containers, housewares, and general purpose injection molding applications.This grade uses Unipol® polypropylene technology with latest catalyst technology.
Osterman & Company Inc.
LD200-SAHC is designed for applications requiring clarity, strength and stiffness.LD200-SAHC exhibits good processability and clarity. Uses for this resin include, bags, film, packaging.LD200-SAHC meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.
UBE Nylon 5034 B
UBE Nylon 5034 B is a PA6/6.6 copolyamide, produced by continuous polymerization process. It is a high viscosity grade suitable for numerous applications. The grade can be used for cast film and blown film (air cooled)..
Hytrel® 4556 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.
ISOFOL 16 is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-hexyl-1-decanol and is also referred to as C16 Guerbet alcohol. It is used in personal care. ISOFOL 16 is a medium spreading emollient, basic material for the production of emollient esters. For documents specific to a region, please contact Sasol using the 'Request Document' button.
Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.
Bioplast® 300 is a plasticizer-free, thermoplastic material that contains natural potato starch and other biologically sourced polymers. The biobased carbon share of the formulation exceeds 30%. BIOPLAST 300 is suitable for blown-film extrusion applications, particularly ultra-light weight films with a thickness of approx. 10 µm. Bags e.g. for fruit and vegetables and films like mailing films made of BIOPLAST 300 are fully biodegradable and compostable according to EN 13432, and have achieved the “OK compost HOME” certification awarded by TÜV AUSTRIA Belgium.
MARLIPAL O 13/90
MARLIPAL O13/90 is based on a primary, multibranched C13 alcohol with approx. 9 moles ethylene oxide. It is used in personal care as water-soluble emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.
Modaflow® 9200 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, substrate wetting, or maintains high gloss and substrate and inter-coat adhesion, and facilitates pigment dispersion.
ISOFOL 32 Alcohol is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-tetradecyl-1-octadecanol and is also referred to as C32 Guerbet alcohol. It is used in personal care as consistency regulator and rich emollient basic material for the production of emollient esters. For documents specific to a region, please contact Sasol using the 'Request Document' button.
DISPAL 28AC2 is a modified boehmite alumina designed specifically for coatings and polymer applications. The key property enhancements in coatings formulations are corrosion inhibition and adhesion promotion. DISPAL 28AC2 is amenable to water and solvent-based paint applications and can be mixed directly into your formulation providing enhanced performance with ease.
Aegis® H100MP resin is a lubricated, nucleated, medium-viscosity nylon 6 extrusion grade homopolymer for cast or blown film applications. It features a combination of strength, toughness, and thermoforming properties along with excellent heat, chemical and abrasion resistance.
MODAFLOW® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion.
Evolue™ SP1510 is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific, Europe, or North America. Applications of Evolue™ SP1510 include film, coating applications and industrial applications.Characteristics include: Good Sealability Impact Resistant
Hytrel® 3078 is a very low modulus grade, with nominal hardness of 30D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Food compliance:Refer to Hytrel® 3078FGTypical applications:Compounding, extrusion, injection molded and over-molded parts for consumer use.
ALFOL 1618 Alcohol is a high purity, petrochemical-based mixture of cetyl Alcohol and stearyl Alcohol. ALFOL 1618 Alcohol is white in appearance with a sweet pungent odor. ALFOL 1618 Alcohol is classified as readily biodegradable in standard ready biodegradability tests. ALFOL 1618 Alcohol are physically and chemically equivalent to corresponding oleochemical-based Alcohols derived from such sources as coconut oil or palm oil. It can be used as is in personal care formulations or as feedstock for various chemical reactions. For documents specific to a region, please contact Sasol using the 'Request Document' button.
TOPAS® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade TOPAS® 8007S-04TOPAS® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer
Evolue™ SP1520 is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific, Europe, or North America. Applications of Evolue™ SP1520 include film, agricultural and packaging.Characteristics include: Good Sealability Impact Resistant
Kuraray Poval™ 49-88
KURARAY POVAL™ 49-88 by Kuraray is a partially saponified polyvinyl alcohol (PVOH) grade. This grade is water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It is used as an adhesive promoter. It is suitable for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It is used in postage stamps and labels. Aqueous solution of KURARAY POVAL™ 49-88 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. Its shelf life is 12 months. Complies with EU Directive 67/548/EC regulation.
UBE Nylon 5034 FDX40
UBE NYLON 5034 FDX40 is a high viscosity, nucleated Polyamide 6/6.6 copolymer. The material is suitable for cast film and air-cooled blown film production. Typical application is for shrink bags and pouches.
Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.