Products in Monomers & Intermediates: Enamel

Dianhydrides & Imides BISDA (4,4-bisphenol A dianhydride, dianhydrides of BPA) are flakes that can serve as a comonomer in polyimide synthesis or as an anhydride curing agent in epoxy applications. When utilized as an epoxy curative, it can enhance thermal performance compared to monoanhydrides and aromatic amine curing agents. Its application areas include electronics encapsulation, composites, and adhesives. Dianhydrides & Imides BISDA-derived polyimide varnishes, coatings, adhesives, films, and wire enamels offer desired solubility and stability in organic solvents even after complete imidization, heat resistance, flexibility/softness, dimensional stability, and adhesion properties for the ever-increasing design complexity of electronic devices. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

TYTAN™ TET is a titanium chelate of triethanolamine and isopropyl alcohol complexes. TYTAN™ TET is a water-soluble titanate that can be used in a variety of applications, e.g., as a cross-linking agent in aqueous and non-aqueous paint, wire enamel, and as an adhesion promoter in polyurethane systems.

Tytan™ TNBT serves multiple purposes, including its utilization as a moisture scavenger to extend the shelf life of moisture-sensitive, high-viscosity products. It is exclusively suitable as an additive for solvent-based products and facilitates ambient temperature curing while enhancing corrosion resistance.

Tytan™ PBT serves as a co-binder in formulations, providing enhanced adhesion and reaction rates. Primarily utilized in formulating heat and corrosion-resistant paints, it also finds application in formulating air-drying paint alongside silicone resins.

Tytan™ TET is a water-soluble titanate utilized across various applications. It serves as a cross-linking agent in both aqueous and non-aqueous paints, wire enamel, and as an adhesion promoter in polyurethane systems. Notably, it forms very strong ionic bonds with metallic substrates.

PHENODUR® VPM 1150/50EPAC, a crosslinking agent designed specifically for use in coil and package coatings in industrial coating applications. This liquid product functions as a co-curing resin when mixed with high molecular-weight epoxide resins. PHENODUR® VPM 1150/50EPAC speeds up curing. Because of their sterilization resistance, the cured films can be used as foil lacquers, stamping enamels, and chemical-resistant primers, among other things.

AC-EAGLE (OH138-90BA70)70% is an acrylic polyol with 4.2% OH for 2K car repair clear coat and solid color enamels with good exterior durability, good build and gloss, high-end hardness and good adhesion results on metallic basecoats.

PHENODUR® PR 612/80B is a bisphenol A-free liquid designed for the building and construction, paints and coatings, and printing and packaging markets. This enamel-type product is specifically used in building envelope and roofing applications within the building and construction sectors, as well as architectural coatings. Additionally, it finds its application in packaging coatings, including other packaging coatings and overprint varnishes.

PUREti™ TPT 20B is a blend of 80% Isopropyl Titanate Monomer & 20% Butyl Titanate Monomer. It is used as a direct esterification and transesterification catalyst and as an olefin polymerization catalyst precursor. Compared to other Organic Titanates, it has the advantage of a low freezing point whilst maintaining high titanium content.

CYMEL® 1170 Resin functions as a crosslinking agent within the CASE Ingredients category. Specifically designed for automotive, transportation, and marine coatings, this clear liquid is applicable across various sectors. Its compatibility spans metal substrates, making it suitable for enamel and primer coatings.

POLURENE MT100 LLV is recommended for the formulation of topcoats non yellowing. Useful for coatings with maximum yellowing resistance and perfect leveling with low VOC content.

POLURENE M 75 BA is a aliphatic biuret with high flexibility, suitable for the formulation of no yellowing 2K PU coating and stoving enamel.

POLURENE M 75 is the hexamethylene diisocyanate biuret. Due to the fact that it is an aliphatic isocyanate resin, POLURENE M 75 should be suitable, when combined together with acrylic or saturated polyester resin, to obtain non yellowing coating very stable to the light with high weather resistance.

POLURENE MT 90 is recommended for the formulation of non yellowing high solid content and low viscosity coatings with for metal,wood and plastics. Being an aliphatic isocyanate, POLURENE MT 90 can be used in combination withacrylic or saturated polyester resins for the formulation of non yellowing coatings, showing UV light stability and excellent mechanical and chemical resistance.

DMPA® Polyol HA-0135 LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersions.

Polyol-280 is a Polyester Resin for PU System.

POLURENE M 75 is recommended for the formulation of topcoats non yellowing and outdoor resistant. POLURENE M 75 is the hexamethylene diisocyanate biuret. Due to the fact that it is an aliphatic isocyanate resin, POLURENE M 75 should be suitable when combined together with acrylic, or saturated poleyster resin, to obtain non yellowing coating very stable to the light with light weather resistance.

POLURENE MT 100 LV is recommended for the formulation of non-yellowing,high solid content and low viscosity coatings with for metal, wood and plastics. POLURENE MT 100 LV is used to prepare formulations with higher solids content, compared to standard HDI biurets and trimers. POLURENE MT 100 LV should not be thinned to below a solids content of 40%.

Polyurethane adduct for general purposes. Suitable for 2K varnishes and enamels. POLURGREEN AD-01 is recommended for the formulation of two component varnishes and enamels for parquet, wood furniture, metal, plastic and paper, hardeners for shoe market adhesive and inks.

POLURENE M 75 is recommended for the formulation of topcoats non yellowing and outdoor resistant. POLURENE M 75 is the hexamethylene diisocyanate biuret.POLURENE M 75 is an aliphatic isocyanate resin suitable, when combined with acrylic or saturated polyester resin, to formulate non yellowing coating stable to the light with high weatherability resistance.

DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA-0135 can be used to formulate high solids and NMP free polyurethane dispersions.

POLURENE OK. D. S is recommended for the formulation of matt and semigloss topcoats or sealers, clear and pigmented color retention and yellowing resistance are required. Due to its slightly yellowing property POLURENE OK. D. S is suitable for light pigmented paints. As well, the paint hardened with POLURENE OK. D. S has good flexibility and mechanical resistance. Due to its reactivity and its compatibility to nitrocellulose,