Brands in Oil, Gas & Mining Chemicals

COBALT™ is a liquid-to-liquid contact product to catalyze mercaptan (RSH) oxidation into disulfide oils (DSO).

TYTAN™ products strongly improves adhesion of printing inks to flexible and metal packaging films while enabling them to withstand heat sealing, freezer storage, abrasive handling, solvents, acids, greases during printing, packaging, storage and handling by consumers.

Naxcat® aromatic sulfonic acids are made by sulfonating aromatic compounds with sulfuric acid, so3 , or oleum. They are comparable in strength to mineral acids such as sulfuric acid, but are especially suitable for organic reactions where an inorganic, mineral acid could cause charring, oxidation, or an unwanted chemical reaction.

LCP 2000® is a proven lost circulation solution that can be used as an additive to drilling, workover and completion fluids. This advanced LCM (lost circulation material) is designed to cure partial to total losses. LCP 2000 has been utilized successfully in hundreds of challenging wells around the world to cure severe losses. It is non-damaging in reservoirs and works in high-pressure, high-temperature (HPHT) wells. LCP 2000 is operationally friendly; one sack can be added as an LCM pill at 25 50 lb/bbl in WBM and up to 100 lb/bbl in OBM. LCP 2000’s particle size eliminates the risk of plugging mud motors, MWD/LWD tools and bit nozzles. LCP 2000 is a selected blend of organic flakes, fibers and inorganic granules. Its primary use is as a lost circulation pill for severe to total losses for induced and natural fractures, faults and small vugs. It can be used as an LCM pill with any fluid system. LCP 2000 can be used to treat seepage as well as partial, severe and total losses.

SFG™ is a surfactant designed for use in our cement spacer systems to water-wet the formation and pipe surfaces, removing the excess hydrocarbon film left behind from non-aqueous drilling fluids. In this way, SFG aids cement bonding and zonal isolation to improve the integrity of the cement job. SFG can be used in both weighted and unweighted spacer systems, and provides excellent cleaning efficiency at low concentrations. When used properly, this cement spacer surfactant improves the effectiveness of the spacer system while displacing non-aqueous drilling fluid. Laboratory testing is recommended to determine optimal concentration.

PecoBead 400™ is a multi-phase lubricant that is designed to decrease the co-efficient of friction in all water- base drilling fluids. The PecoBead 400™ decreases the coefficient of friction that reduces torque, drag and the potential for differential sticking in the wellbore.

Anionic surfactants are negatively charged materials that are available in a variety of chemical types. The main classes being alkyl ether sulfates, alkyl sulfates, alkylbenzene sulfonates, alpha olefin sulfonates, phosphate esters. They are used in a wide range of applications where they provide useful characteristics including, emulsification, solubilisation, wetting, detergency, dispersion and foaming.