Products in Engineering & Specialty Polymers: Hand Lay-Up

AOC's Vipel K022 series is a brominated bisphenol A epoxy vinyl ester resin dissolved in styrene. Vipel K022 series is ideally suited for use in hand lay-up, spray-up, filament winding and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required. Vipel K022-CN series contains antimony products.BENEFITSFire RetardantSome Vipel K022 versions do not require antimony trioxide to meet ASTM E 84 Class I flame spread requirements.Mechanical PropertiesVipel K022 is suitable for moldings that are subjected to particularly high static or dynamic loads. Vinyl ester resins have excellent resistance to sustained heat.VersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Corrosion ResistanceVipel K022 is highly resistant to a number of chemical environments. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

AOC's Vipel K022 series is a brominated bisphenol A epoxy vinyl ester resin dissolved in styrene. Vipel K022 series is ideally suited for use in hand lay-up, spray-up, filament winding and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required. Vipel K022-CN series contains antimony products.BENEFITSFire RetardantSome Vipel K022 versions do not require antimony trioxide to meet ASTM E 84 Class I flame spread requirements.Mechanical PropertiesVipel K022 is suitable for moldings that are subjected to particularly high static or dynamic loads. Vinyl ester resins have excellent resistance to sustained heat.VersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Corrosion ResistanceVipel K022 is highly resistant to a number of chemical environments. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

AOC's Vipel K010-TB series are promoted bisphenol A, epoxy-based vinyl ester resins dissolved in styrene and methyl methacrylate. Flame and smoke resistance is obtained by incorporating at least 60 parts of alumina trihydrate per 100 parts of resin.Vipel K010-TB series are ideally suited for use in hand lay-up, spray-up and filament winding processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel K010-TB series is suitable for moldings that are subjected to particularly high static or dynamic loads. Vinyl ester resins have excellent resistance to sustained heat.Vipel K010-TB series resins are highly resistant to several chemical environments.

AOC's Vipel F764 Series is a high cross-linked isophthalic polyester resin.AOC's Vipel F764 Series resins were developed to meet the demanding requirements of underground petroleum storage tanks that contain oxygenated fuels.BENEFITSUL RecognitionAOC's Vipel F764 Series resins are recognized by UL for meeting the requirements of UL 1316 and UL 1746 Part II and Part III.Corrosion ResistanceVipel F764 Series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many fuels including gasoline, kerosene, heating oil and crude oils. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion reistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

The Vipel F017 Series are elastomeric, bisphenol A epoxy vinyl ester resins. Vipel F017-AAA-00 is a non-promoted, non-thixotropic resin that can be formulated as needed.BENEFITSLow VOC contentVersions are available that are less than 40% styrene.BondingAOC's Vipel F017 Series resins are designed as a primer for bonding fiberglass laminates to steel and other substrates.ResilienceIt can also be used to manufacture hand lay-up, spray-up or filament wound parts that require a great deal of resilience.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

AOC's Vipel F701 Series resins are high molecular weight, two-stage isophthalic, unsaturated polyester resin with the wet out, cure and handling characteristics of general purpose resins.They have an excellent shelf life and are ideal for filament winding and spray-up. A few selected resins are listed below including the high viscosity base resin, Vipel F701-FHG-00.BENEFITSCorrosion resistanceAOC's Vipel F701 series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many petroleum products such as kerosene, heating oil and crude oils.Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up and filament winding.

The Vipel F085 series is an epoxy novolac vinyl ester resin dissolved in styrene. 085 series is ideally suited for applications where outstanding mechanical properties and resistance to chemicals, oxidation and heat are required.BENEFITSCorrosion ResistanceThe epoxy novolac backbone chemistry provides resistance to acids and bases and has superior resistance to many organic solvents. The F085 series is generally resistant to liquids and vapors at higher temperatures than standard bisphenol-A epoxy vinyl ester resins.The F085 series is well suited for use in the field of chlorine-alkali electrolysis. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment, contact AOC.Mechanical PropertiesThe F085 series is suitable for moldings that are subjected to particularly high static and dynamic loads. It is resistant to internal stress cracking under high loading.VersatileSuitable for various fabricating methods such as hand lay-up, filament winding, etc.

AOC's F774 Series is a high cross-linked terephthalic polyester resin.The F774 series resin were developed to meet the demanding requirements of underground petroleum storage tanks that contain oxygenated fuels.BENEFITSUL RecognitionAOC's F774 Series resins are recognized by UL for meeting the requirements of UL 1316 and UL 1746 Part II and Part III.Corrosion ResistanceF774 Series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many fuels including gasoline, kerosene, heating oil and crude oils. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

AOC's Vipel K022 series is a brominated bisphenol A epoxy vinyl ester resin dissolved in styrene. Vipel K022 series is ideally suited for use in hand lay-up, spray-up, filament winding and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required. Vipel K022-CN series contains antimony products.BENEFITSFire RetardantSome Vipel K022 versions do not require antimony trioxide to meet ASTM E 84 Class I flame spread requirements.Mechanical PropertiesVipel K022 is suitable for moldings that are subjected to particularly high static or dynamic loads. Vinyl ester resins have excellent resistance to sustained heat.VersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Corrosion ResistanceVipel K022 is highly resistant to a number of chemical environments. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

AOC's Vipel K022 series is a brominated bisphenol A epoxy vinyl ester resin dissolved in styrene. Vipel K022 series is ideally suited for use in hand lay-up, spray-up, filament winding and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required. Vipel K022-CN series contains antimony products.BENEFITSFire RetardantSome Vipel K022 versions do not require antimony trioxide to meet ASTM E 84 Class I flame spread requirements.Mechanical PropertiesVipel K022 is suitable for moldings that are subjected to particularly high static or dynamic loads. Vinyl ester resins have excellent resistance to sustained heat.VersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Corrosion ResistanceVipel K022 is highly resistant to a number of chemical environments. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

AOC's Vipel F764 Series is a high cross-linked isophthalic polyester resin.AOC's Vipel F764 Series resins were developed to meet the demanding requirements of underground petroleum storage tanks that contain oxygenated fuels.BENEFITSUL RecognitionAOC's Vipel F764 Series resins are recognized by UL for meeting the requirements of UL 1316 and UL 1746 Part II and Part III.Corrosion ResistanceVipel F764 Series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many fuels including gasoline, kerosene, heating oil and crude oils. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion reistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

AOC's Vipel K010-TB series are promoted bisphenol A, epoxy-based vinyl ester resins dissolved in styrene and methyl methacrylate. Flame and smoke resistance is obtained by incorporating at least 60 parts of alumina trihydrate per 100 parts of resin.Vipel K010-TB series are ideally suited for use in hand lay-up, spray-up and filament winding processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel K010-TB series is suitable for moldings that are subjected to particularly high static or dynamic loads. Vinyl ester resins have excellent resistance to sustained heat.Vipel K010-TB series resins are highly resistant to several chemical environments.

AOC's Vipel F701 Series resins are high molecular weight, two-stage isophthalic, unsaturated polyester resin with the wet out, cure and handling characteristics of general purpose resins.They have an excellent shelf life and are ideal for filament winding and spray-up. A few selected resins are listed below including the high viscosity base resin, Vipel F701-FHG-00.BENEFITSCorrosion resistanceAOC's Vipel F701 series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many petroleum products such as kerosene, heating oil and crude oils.Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up and filament winding.

AOC's Vipel K026 Series is a brominated bisphenol A epoxy vinyl ester resin dissolved in styrene. K026 Series is ideally suited for use in hand lay-up, spray-up, filament winding and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSFire RetardantThe Vipel K026 does not require antimony trioxide to meet ASTM E 84 Class I flame spread and smoke requirements.Mechanical PropertiesVipel K026 is suitable for moldings that are subjected to particularly high static or dynamic loads. Vinyl ester resins have excellent resistance to sustained heat.VersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Corrosion ResistantVipel K026 is highly resistant to a number of chemical environments. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

AOC's Vipel F282 series resins are high molecular weight, bisphenol-A fumarate, unsaturated polyester resins. Vipel F282 series has an excellent shelf life and is ideal for filament winding and spray-up applications. One unique version is Vipel F282-ZZZ-00 which is the powdered alkyd product that can be shipped abroad and blended locally with styrene and other monomers. Please see the Vipel F282-ZZZ-00 product data sheet for additional information.BENEFITSCorrosion ResistanceAOC's Vipel F282 is designed to make parts for a broad range of chemical environments such as acidic, bleach, hydrogen peroxide, oxidizing media and caustic.Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information. For questions regarding suitability of a resin to any particular chemical environment contact your AOC representative.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up and filament winding.It is the fabricator's responsibility to be sure that the final composite is well cured. All composites used for FDA applications should be post cured at 180°F/82°C for at least 4 hours. After post curing, laminate should be washed with soap and water and then rinsed. winding, etc.

The Vipel F085 series is an epoxy novolac vinyl ester resin dissolved in styrene. 085 series is ideally suited for applications where outstanding mechanical properties and resistance to chemicals, oxidation and heat are required.BENEFITSCorrosion ResistanceThe epoxy novolac backbone chemistry provides resistance to acids and bases and has superior resistance to many organic solvents. The F085 series is generally resistant to liquids and vapors at higher temperatures than standard bisphenol-A epoxy vinyl ester resins.The F085 series is well suited for use in the field of chlorine-alkali electrolysis. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment, contact AOC.Mechanical PropertiesThe F085 series is suitable for moldings that are subjected to particularly high static and dynamic loads. It is resistant to internal stress cracking under high loading.VersatileSuitable for various fabricating methods such as hand lay-up, filament winding, etc.

Atlac® E-Nova RE 3475 by Aliancys is comprised of Vinyl Ester Resin. It is commonly used It is available in Liquid form.

Atlac® E-Nova MA 6325 by Aliancys is comprised of Vinyl Ester Resin. It is commonly used It is available in Liquid form.

Vipel K733-A series is a fire retardant isophthalic polyester resin that meets ASTM E 84 Class I with no synergists added.Vipel K733 series resins are ideally suited for use in hand lay-up, spray-up and filament winding processes where outstanding mechanical properties and mild chemical resistance are required.BENEFITSFire RetardantVipel K733-A requires no antimony trioxide spread to meet ASTM E 84 Class I flame spread requirements.VersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Corrosion ResistanceVipel K733 provides mild chemical resistance to a number of chemical environments. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

AOC's Vipel F701 Series resins are high molecular weight, two-stage isophthalic, unsaturated polyester resin with the wet out, cure and handling characteristics of general purpose resins.They have an excellent shelf life and are ideal for filament winding and spray-up. A few selected resins are listed below including the high viscosity base resin, Vipel F701-FHG-00.BENEFITSCorrosion resistanceAOC's Vipel F701 series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many petroleum products such as kerosene, heating oil and crude oils.Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up and filament winding.

AOC's Vipel F013 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F013 series is ideally suited for use in hand lay-up, spray-up, filament winding and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F013 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistantVipel F013 highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment.

AOC's Vipel F701 Series resins are high molecular weight, two-stage isophthalic, unsaturated polyester resin with the wet out, cure and handling characteristics of general purpose resins.They have an excellent shelf life and are ideal for filament winding and spray-up. A few selected resins are listed below including the high viscosity base resin, Vipel F701-FHG-00.BENEFITSCorrosion resistanceAOC's Vipel F701 series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many petroleum products such as kerosene, heating oil and crude oils.Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up and filament winding.

AOC's Vipel F701 Series resins are high molecular weight, two-stage isophthalic, unsaturated polyester resin with the wet out, cure and handling characteristics of general purpose resins.They have an excellent shelf life and are ideal for filament winding and spray-up. A few selected resins are listed below including the high viscosity base resin, Vipel F701-FHG-00.BENEFITSCorrosion resistanceAOC's Vipel F701 series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many petroleum products such as kerosene, heating oil and crude oils.Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up and filament winding.

AOC's F774 Series is a high cross-linked terephthalic polyester resin.The F774 series resin were developed to meet the demanding requirements of underground petroleum storage tanks that contain oxygenated fuels.BENEFITSUL RecognitionAOC's F774 Series resins are recognized by UL for meeting the requirements of UL 1316 and UL 1746 Part II and Part III.Corrosion ResistanceF774 Series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many fuels including gasoline, kerosene, heating oil and crude oils. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

AOC's Vipel F737 Series is a resilient isophthalic polyester resin with excellent mechanical properties. Vipel F737 resins are used extensively in grating and in the construction of large diameter water pipes for transporting water to and from power stations. Vipel F737 Series resins can be adapted for a variety of fabrication processes.BENEFITSInternationally RecognizedVipel F737 series resins have been used in many corrosion resistant applications such as grating and water pipes, etc.Corrosion ResistanceThis resin provides excellent corrosion resistance when used in contact with inorganic and organic acids. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

AOC's Vipel F737 Series is a resilient isophthalic polyester resin with excellent mechanical properties. Vipel F737 resins are used extensively in grating and in the construction of large diameter water pipes for transporting water to and from power stations. Vipel F737 Series resins can be adapted for a variety of fabrication processes.BENEFITSInternationally RecognizedVipel F737 series resins have been used in many corrosion resistant applications such as grating and water pipes, etc.Corrosion ResistanceThis resin provides excellent corrosion resistance when used in contact with inorganic and organic acids. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

AOC's F774 Series is a high cross-linked terephthalic polyester resin.The F774 series resin were developed to meet the demanding requirements of underground petroleum storage tanks that contain oxygenated fuels.BENEFITSUL RecognitionAOC's F774 Series resins are recognized by UL for meeting the requirements of UL 1316 and UL 1746 Part II and Part III.Corrosion ResistanceF774 Series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many fuels including gasoline, kerosene, heating oil and crude oils. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

Vipel K190 series is a chlorendic polyester resin designed for fire resistant and corrosion resistant applications. K190 series resin is designed to be used in demanding chemical environments such as hot wet chlorine and oxidizing chemicals.BENEFITSFlame/Smoke ResistanceVipel K190-B series resin meet ASTM E 84 Class II when 3.0% antimony trioxide is added.Heat ResistanceVipel K190-B series is designed for high temperature applications.VersatileSuitable for various fabricating methods such as hand lay-up, filament winding, etc.Corrosion ResistanceVipel K190 is highly resistant to a number of chemical environments. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

AOC's F774 Series is a high cross-linked terephthalic polyester resin.The F774 series resin were developed to meet the demanding requirements of underground petroleum storage tanks that contain oxygenated fuels.BENEFITSUL RecognitionAOC's F774 Series resins are recognized by UL for meeting the requirements of UL 1316 and UL 1746 Part II and Part III.Corrosion ResistanceF774 Series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many fuels including gasoline, kerosene, heating oil and crude oils. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

The Vipel F086 series is an epoxy novolac vinyl ester resin dissolved in styrene and designed for high temperature resistance.F086 series is ideally suited for use in hand lay-up, spray-up, and filament winding processes where outstanding mechanical properties and resistance to chemicals, oxidation and heat are required.BENEFITSCorrosion ResistanceVipel F086 is designed for high temperature resistance. The epoxy novolac backbone provides resistance to acids and has superior resistance to many organic solvents. Vipel F086 series is generally resistant to liquids and vapors at higher temperatures than standard bisphenol-A epoxy vinyl ester resins or standard novolacs.Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.Mechanical PropertiesThe F086 series is suitable for moldings that are subjected to particularly high temperature applications. Suitable for various fabricating methods such as hand lay-up, filament winding, etc.VersatileSuitable for various fabricating methods such as hand lay-up, filament winding, etc.

AOC's Vipel F007 is a low VOC, bisphenol A, epoxy-based vinyl ester resin dissolved in styrene.BENEFITSVersatileThe Vipel F007 Series is ideally suited for use in hand lay-up, spray-up, filament winding and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.Wide formulating capabilities allow for use in many processes and for optimization of cost/performance.Corrosion ResistantRefer to AOC's "Corrosion Resistant Resin Guide under product F007" for corrosion resistance information. For questions regarding suitability of a resin to any particular chemical environment, contact AOC.

The Vipel K095-AAA-00 is a fire retardant epoxy novolac vinyl ester resin dissolved in styrene. Vipel K095-AAA-00 is ideally suited for use in hand lay-up, spray-up, and filament winding processes where outstanding mechanical properties and resistance to solvents, oxidizing environments, chemicals and good thermal mechanical properties is required.BENEFITSCorrosionThe epoxy novolac-based backbone chemistry provides resistance to organic solvents and good resistance to acids and alkalies. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.Fire RetardancyVipel K095-AAA-00 meets ASTM E 84 class I requirements for flame spread and smoke development neat.Heat Temperature ResistanceVipel K095-AAA-00 has excellent thermal mechanical properties.ProcessabilityVipel K095-AAA-00 is suitable for filament winding and hand lay up processes.

Vipel® F701-S Series resins are high molecular weight, two-stage isophthalic, unsaturated polyester resin with the wet out, cure and handling characteristics of general purpose resins. The main feature is lower styrene content.They have an excellent shelf life and are ideal for filament winding and spray-up. A few selected resins are listed below.BENEFITSCorrosion resistanceAOC's Vipel® F701-S series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many petroleum products such as kerosene, heating oil and crude oils. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC. F701-S series resins contain less styrene than standard versions.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up and filament winding.

AOC's Vipel F282 series resins are high molecular weight, bisphenol-A fumarate, unsaturated polyester resins. Vipel F282 series has an excellent shelf life and is ideal for filament winding and spray-up applications. One unique version is Vipel F282-ZZZ-00 which is the powdered alkyd product that can be shipped abroad and blended locally with styrene and other monomers. Please see the Vipel F282-ZZZ-00 product data sheet for additional information.BENEFITSCorrosion ResistanceAOC's Vipel F282 is designed to make parts for a broad range of chemical environments such as acidic, bleach, hydrogen peroxide, oxidizing media and caustic.Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information. For questions regarding suitability of a resin to any particular chemical environment contact your AOC representative.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up and filament winding.It is the fabricator's responsibility to be sure that the final composite is well cured. All composites used for FDA applications should be post cured at 180°F/82°C for at least 4 hours. After post curing, laminate should be washed with soap and water and then rinsed. winding, etc.

Atlac® 580 ACT by Aliancys is comprised of Vinyl Ester Resin. It is commonly used It is available in Liquid form.

AOC's Vipel F701 Series resins are high molecular weight, two-stage isophthalic, unsaturated polyester resin with the wet out, cure and handling characteristics of general purpose resins.They have an excellent shelf life and are ideal for filament winding and spray-up. A few selected resins are listed below including the high viscosity base resin, Vipel F701-FHG-00.BENEFITSCorrosion resistanceAOC's Vipel F701 series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many petroleum products such as kerosene, heating oil and crude oils.Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up and filament winding.