Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Parts, Shapes & Films
Products in Parts, Shapes & Films
1,838 Products found in Parts, Shapes & Films
Filters
Suppliers
Applications
Physical Form
Polymer Name
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Mitsubishi Chemical Group Corporation
Ertalyte® PET - P
Polymer Name:
Polyethylene Terephthalate (PET)
Physical Form:
Tube, Plates, Rods
Features:
Food Contact Acceptable, Excellent Rigidity, Low Moisture Absorption, Low Coefficient of Friction, Wear Resistant, High Strength, Acid Resistant, High Tolerance, High Loading Absorption Capability, Odorless, Dimensional Stability, Semi Crystalline, Chemical Resistant, Abrasion Resistant
Density:
1390.0 - 1390.0 kg/m³
Tensile Modulus:
3500.0 - 3500.0 MPa
Color:
White, Black
Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.
Mitsubishi Chemical Group Corporation
Ertalon® 6 XAU+ PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Rods, Tube, Plates
Features:
Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability, High Degree of Crystallinity, High Density, X-Ray Shielding, Heat Aging Resistant, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, Excellent Stiffness, High Temperature Application, Heat Stabilized, Wear Resistant, Excellent Mechanical Strength, Improved Wear
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3500.0 - 3500.0 MPa
Ertalon® 6 XAU+ Polyamide PA6 is a polyamide PA6 material that is heat-stabilized and boasts a dense and highly crystalline structure. This material offers superior heat aging performance in air, making it a reliable choice for bearings and other mechanical parts that are subject to wear and that operate at high temperatures for extended periods of time.Features:Heat-stabilizedHighly dense, crystalline structureSuperior heat aging performance in airBenefits:Reliable wear resistance and performance at service temperatures over 60°C (140°F)Ideal for use in bearings and other mechanical parts that are subject to wear and that operate at high temperatures for extended periods of timeApplications:Bearings and other mechanical parts in high temperature environmentsIndustrial machinery and equipmentAutomotive and transportation industriesOther applications where heat and wear resistance are critical factors.
Mitsubishi Chemical Group Corporation
Acetron® H POM-H
Polymer Name:
Polyacetal Homopolymer (POM)
Physical Form:
Plates, Rods
Features:
High Hardness, Creep Resistant, Excellent Stiffness, Low Thermal Expansion, Low Moisture Absorption, Wear Resistant, High Strength, Excellent Mechanical Strength, Improved Wear, Good Machinability
Density:
1430.0 - 1430.0 kg/m³
Tensile Modulus:
3700.0 - 3700.0 MPa
Acetron® POM-H / Ertacetal® H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, and hardness, making it the ideal choice for a wide range of demanding applications. Its superior creep resistance and low thermal expansion rate make it stand out from copolymer acetal grades, making it the go-to material for small diameter, thin-walled bushings, bearings, gears, electrical components, medical and diagnostic equipment, valves, and fluid handling components.Features:Superior mechanical strength, stiffness, and hardnessExceptional creep resistanceLow thermal expansion rateHigh wear resistanceBenefits:Durable and long-lasting performanceEasy installation and removal with minimal distortionHigh resistance to chemical wearHigh impact strength, even at low temperaturesExcellent dimensional stabilityApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components
Mitsubishi Chemical Group Corporation
Duratron® T4503 PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Tube, Plates, Rods
Features:
High Strength, High Tolerance, Creep Resistant, Odorless, Low Thermal Expansion, Thermally Insulating, Dimensional Stability
Density:
1400.0 - 1400.0 kg/m³
Tensile Modulus:
3450.0 - 3450.0 MPa
Duratron® T4503 PAI Polyamide-imide is a compression molded material that offers exceptional electrical insulation properties and excellent dimensional stability. This grade is often selected for extreme applications where large geometries are required, such as dies or thermal insulators. It has a similar composition to Duratron® T4203 PAI and is known for its high compressive strength, elongation, and impact resistance.Features:Outstanding electrical insulation propertiesExcellent dimensional stabilityHigh compressive strength and elongationImpact resistanceBenefits:Suitable for extreme applications such as dies and thermal insulatorsCan be used for large geometriesCan be used for electrical connectors and insulatorsApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearHigh Temperature Electrical ConnectorsBearing CagesCan Mandrel
Mitsubishi Chemical Group Corporation
Zeniva® ZA-500 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Parts & Shapes, Plates, Rods
Features:
High Fatigue Resistance, X-Ray Transparent, Creep Resistant, Low Stress Shielding, Excellent Stiffness, High Loading Capacity, High Strength, Excellent Toughness, High Performance, Dimensional Stability, High Strain Capability
Density:
1290.0 - 1290.0 kg/m³
Tensile Modulus:
3600.0 - 3600.0 MPa
Zeniva® ZA-500 PEEK is a high-performance specialty polymer known for its remarkable strength, advanced stiffness, and exceptional toughness. Specifically designed for structural, load-bearing implantable medical devices, this bio-stable plastic offers excellent fatigue and creep resistance, ensuring durability under continuous strain and repeated loading. In comparison to metals, it presents advantages such as reduced stress shielding, absence of heavy metal allergies or ion erosion, and radiolucent properties for interference-free X-ray and CT scanning procedures.
Mitsubishi Chemical Group Corporation
Semitron® ESd 420 PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Rods, Tube, Plates
Features:
High Stiffness, ESD Protection, High Strength, High Tolerance, Static-Dissipative, Odorless
Density:
1320.0 - 1320.0 kg/m³
Tensile Modulus:
3850.0 - 3850.0 MPa
Color:
Black
Semitron® ESd 420 PEI Polyetherimide electro static dissipative shapes exhibit high strength and stiffness, and excellent resistivity in the 10E5 to 10E8 ohms per square range. This grade in particular excels in high temperature environments, making it ideal for extreme structural applications in semiconductor and electronics markets.Features:High strength and stiffnessExcellent resistivity in the 10E5 to 10E8 ohms per square rangeSuitable for high temperature environmentsSurface resistivity: 106 - 109 ohms/sqBenefits:Ideal for extreme structural applications in semiconductor and electronics marketsOnly truly dissipative plastic product for use in high temperature applicationsCan withstand harsh conditions while maintaining its electrostatic propertiesApplications:Semiconductor and electronics industryHigh temperature structural applications such as in electronic components and equipment, where electrostatic discharge (ESD) protection is necessary.Can be used in electronic packaging, automotive, aerospace, and other industries where static control is critical.
Mitsubishi Chemical Group Corporation
Fluorosint® 135 PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Rods, Tube, Plates
Features:
High Performance, Good Mechanical Properties, High Stiffness, Low Coefficient of Friction, High Strength, High Tolerance, Anti-Wear Properties
Density:
1890.0 - 1890.0 kg/m³
Tensile Modulus:
1.238 - 1.238 MPa
Color:
Black
Fluorosint® 135 is an advanced polymer material that combines the excellent chemical resistance, low friction and high temperature properties of PTFE (polytetrafluoroethylene) with the added low coefficient of friction, strength, stiffness and high pressure velocity capabilities. This material is designed to excel in demanding applications where high performance and reliability are required.Key features:Low coefficient of friction: provides excellent wear and deformation resistanceHigh strength and stiffness: provides superior mechanical performance at elevated temperaturesPTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Low coefficient of friction, making it ideal for seals, bearings, and washer applicationsImproved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Low friction seals, bearings and washer applicationsHigh-performance wear applications where extreme conditions are present such as high temperature, pressure and chemical exposureComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high chemical resistance, low friction, and high temperature properties such as valves, pumps, and heat exchangers.Fluorosint® 135 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. It's also important to mention that the temperature and chemical resistance can vary depending on the grade of PTFE used as well as other additives, always consult with the manufacturer for the exact properties of the final material.
Mitsubishi Chemical Group Corporation
Duratron® PI D7000
Polymer Name:
Polyimide (PI)
Physical Form:
Sheets, Tube, Rods
Features:
Cost Effective, Good Mechanical Properties, High Strength, High Tolerance, Light Weight, Excellent Toughness, Electrically Insulating, Thermally Insulating, Dimensional Stability, Chemical Resistant, Service Life Extension, High Temperature Resistance
Density:
1380.0 - 1380.0 kg/m³
Tensile Modulus:
3700.0 - 3700.0 MPa
Color:
Brown
Duratron® D7000 PI Polyimide shapes - a high-performance material ideal for demanding applications that require exceptional thermal resistance, low wear and friction, strength, and impact resistance. With superior electrical and thermal insulation properties, outstanding mechanical performance, great chemical resistance, and outstanding dimensional stability, Duratron® D7000 PI is an ideal solution for designs that reduce weight, extend service life, and reduce overall costs.Features:Superior electrical and thermal insulation propertiesOutstanding mechanical performanceGreat chemical resistanceHigh strength and toughnessOutstanding dimensional stabilityBenefits:Ideal for designs that reduce weightExtends service life before maintenance or replacementReduces overall costs by increasing process uptimeApplications:AerospaceTransportationIndustrialDuratron® D7000 PI is available in stock shapes and direct formed parts, perfect for smaller series and designs where tolerances and geometry of the end part require machining. The material is also available in Hot Compression Molded (HCM) shapes, providing designers with the greatest economy and flexibility.
Mitsubishi Chemical Group Corporation
Ertacetal® C ELS POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Plates, Rods
Features:
Good Sliding Properties, High Hardness, Exceptional Resilience, Electrically Conductive, Creep Resistant, Excellent Stiffness, Low Moisture Absorption, Wear Resistant, High Strength, Excellent Mechanical Strength, Excellent Dielectric Properties, Low Water Absorption, Electrically Insulating, Good Machinability, Dimensional Stability
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
1500.0 - 1500.0 MPa
Ertacetal® C ELS Polyoxymethylene POM-C shapes exhibit excellent electrical conductivity qualities, low moisture absorption, high strength and stiffness, and great machinability capabilities. This grade in particular is recommended for use in electrical and explosion sensitive applications, and complies with REACH (EC) no 1907/2006 and UL 94 HB flame rating requirements.Features:Excellent electrical conductivityLow moisture absorptionHigh strength and stiffnessGreat machinabilityBenefits:Ertacetal® C ELS is the perfect solution for applications that require excellent electrical conductivity, low moisture absorption, and high strength and stiffness.Its great machinability makes it easy to work with, ensuring precise and accurate production.Applications:Ertacetal® C ELS is ideal for use in electrical and explosion sensitive applications and complies with REACH (EC) no 1907/2006 and UL 94 HB flame rating requirements.Its excellent electrical conductivity makes it perfect for use in electrical equipment, and its low moisture absorption ensures that it can be used in harsh environments without any issues.Its high strength and stiffness make it suitable for use in applications where precision and accuracy is required.
SABIC's Specialties Business
ELCRES™ Dielectric Film HTV150A
Physical Form:
Film
Features:
Self Healing, Unreinforced, Metallizable, High Electric Breakdown Strength, Very Good Heat Resistance, Excellent Dielectric Properties, Good Adhesion
Color:
Natural
ELCRES™ Dielectric Film HTV150A by SABIC is designed to meet high-temperature demands for professional DC-Link power capacitors, catering to evolving high-voltage industry needs. With stability across temperatures (-40°C to +150°C) and frequencies (up to 100 kHz), ELCRES™ HTV150A film offers consistent properties. This includes sustained capacitance, robust insulation resistance, a steady dielectric constant (Dk), and a minimal dissipation factor (Df).
THAI WAH
ROSECO® Mulch Film SM1
Tensile Modulus:
45.0 - 45.0 MPa
ROSECO® Mulch Film SM1 is a biocompostable black mulch film with high strength and mechanical performance. This layer of black mulch stops light from penetrating, encourages photosynthesis, keeps the soil moist, inhibits weed growth, boosts yield, and saves harvesting expenses.
SABIC's Specialties Business
ULTEM™ Dielectric Film UTF120
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Film
Features:
Temperature Resistance, Flame Retardant, Unreinforced, Dimensional Stability, Design Flexibility, High Electric Breakdown Strength, Ease of Handling, Flame Resistant, Excellent Dielectric Properties
Density:
1290.0 - 1290.0 kg/m³
SABIC's Specialties Business ULTEM™ Dielectric Film UTF120 provides solutions for small to medium-sized, professional-grade capacitors, up to 10 microfarads in capacitance, to meet challenging industry requirements. The film exhibits stable properties across a range of temperatures (-40°C to +150 °C) and frequencies, including stable capacitance, good insulation resistance, a stable dielectric constant (Dk), and a low dissipation factor (Df). ULTEM™ Dielectric Film UTF120 has been validated by customers for use with both film-foil and metalized electrodes, including flat aluminum, heavy edge/light body, and fused/patterned electrode designs. It also offers excellent handling through metallization, winding, and capacitor squashing/flattening. Capacitors using this film are capable of passing industry-standard 260°C reflow soldering processes. It is available in 4, 5, 7, and 10-micron gauges and sold in 620mm x 5000m size rolls.
Dar-Tech Inc.
CDF Foil Material #ROLL 24X 200-05-09
Polymer Name:
Polypropylene/Foil/Polyethylene Film
Physical Form:
Film
Features:
Good Moisture Resistance, Oxygen Barrier, Food Contact Acceptable
CDF Foil Material #ROLL 24X 200-05-09 is a specialty foil material used for applications where oxygen and moisture vapor protection are important. It can be used to protect objects from dust, grease, or other contaminates. This material conforms to FDA regulations, Part 177.1520 CFR, for direct food contact.
Dar-Tech Inc.
CDF Foil Material #ROLL 48X 200-05-09
Polymer Name:
Polypropylene/Foil/Polyethylene Film
Physical Form:
Film
Features:
Good Moisture Resistance, Oxygen Barrier, Food Contact Acceptable
CDF Foil Material #ROLL 48X 200-05-09 is a specialty foil material used for applications where oxygen and moisture vapor protection are important. It can be used to protect objects from dust, grease, or other contaminates. This material conforms to FDA regulations, Part 177.1520 CFR, for direct food contact.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 21GS
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 21GS is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50HK(KN)
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50HK(KN) is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 25MW
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50MW
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 100N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 100N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 25N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50LM
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50LM is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 250NJ
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 250NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 40N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 40N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 200NJ
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 200NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 12N
Polymer Name:
Ethylene Tetrafluoroethylene Copolymer (ETFE)
Physical Form:
Film
Features:
High Durability, Non Stick, High Performance, UV Resistant, Good Moldability, High Dielectric Strength, Flexible, Excellent Transparency Properties, Excellent Flexibility, Good Mold Release, Excellent Anti-Fouling Properties, Low Dielectric Constant, Outdoor Durability, Good UV Resistance, Good Electrical Properties, Corona Treated, Very Good Heat Resistance, High Light Transmission, Good Weather Stability, Chemical Resistant, Wide Temperature Operating Range, Good Mechanical Properties
Density:
1750.0 - 1750.0 kg/m³
Color:
Transparent
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 12N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
Norplex-Micarta
Norplex-Micarta NP511
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Fabric, Sheets
Density:
1800.0 - 1800.0 kg/m³
Features:
Electrically Insulating, Good Electrical Properties, UL Listed, High Temperature Strength, Good Impact Strength, Good Flexural Modulus, Excellent Mechanical Strength, Good Bonding Strength
NP511 consists of a woven glass fabric combined with high temperature epoxy resin system. NP511 has excellent mechanical strength and electrical properties from cryogenic to elevated temperatures. Continuous operating temperature is 175°C. This material meets NEMA G-11, MIL-I-24768/3, Type GEB and IEC-60893-3-2 EP GC 203.
Norplex-Micarta
Norplex-Micarta NP320U
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1340.0 - 1340.0 kg/m³
Features:
Good Machinability, Wear Resistant, Reduced Noise
Utility version of NP320E. Meets most, but not all, NEMA properties for L and LE, and is not certifiable as a NEMA Grade.
Norplex-Micarta
Norplex-Micarta NP101
Polymer Name:
Phenolic Compound
Reinforcement Material:
Nylon
Physical Form:
Sheets, Fabric
Density:
1150.0 - 1150.0 kg/m³
Features:
Good Impact Strength, Good Electrical Properties
Phenolic resin combined with spun nylon fabric. Good impact strength and excellent electrical properties under high humidity conditions.
Norplex-Micarta
Norplex-Micarta NP843
Polymer Name:
Phenolic Compound
Physical Form:
Sheets
Density:
1400.0 - 1400.0 kg/m³
Features:
Electrically Insulating, Semi Conductive, Excellent Mechanical Strength, Static-Dissipative
Paper reinforced phenolic grade with controlled conductivity. NP843 has mechanical strength similar to NP611. It has conductive surfaces only.
Norplex-Micarta
Norplex-Micarta NP310
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1370.0 - 1370.0 kg/m³
Features:
Non Abrasive, Good Impact Strength, Good Mechanical Properties, Wear Resistant, UL Listed, Good Machinability
NP310 is a canvas machining grade for structural and mechanical applications. It has better impact strength than phenolic paper grades. NP310 meets or exceeds the requirements of MIL-I-24768/16 and IEC-60893-4-PF CC 201.
Norplex-Micarta
Norplex-Micarta MC223
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1440.0 - 1440.0 kg/m³
Features:
Bearing Grade
Grade MC223 is a medium weave cotton phenolic composite. Typical applications include pintle and stave-type bearings for rudder shafts in the marine industry. This material is known industry wide as “Marine Micarta.” This product is also suitable for heavy equipment applications that require finer machining profiles than those provided by bearing-grade laminates.
Norplex-Micarta
Norplex-Micarta NP310E
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1370.0 - 1370.0 kg/m³
Features:
Non Abrasive, Reduced Noise, Low Moisture Absorption, Electrically Insulating, Good Electrical Properties, Good Machinability
Manufactured with a cotton fabric and phenolic resin, NP310E is easy to machine and possesses lower moisture absorption and enhanced electrical properties. NP310E meets or exceeds the requirements of MIL-I-24768/14.
Norplex-Micarta
Norplex-Micarta NP329
Polymer Name:
Melamine Formaldehyde (MF)
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1470.0 - 1470.0 kg/m³
Features:
Good Machinability, High Hardness, Arc Resistant, Durable
Bleached linen with melamine resin system. NP329 provides better arc resistance than NP320E. Also, resistant to ammonia based refrigerants. Hard, durable material should be heated to punch, but machines very well with standard machining equipment. NP329 meets UL94, HB.
Norplex-Micarta
Norplex-Micarta P95
Polymer Name:
Thermoset Polyimide (PI), Polyimide (PI)
Reinforcement Material:
Glass Fibers
Physical Form:
Fabric, Sheets
Density:
1840.0 - 1840.0 kg/m³
Features:
Low Thermal Expansion, High Temperature Strength, Excellent Mechanical Strength, Good Compressive Strength, Chemical Resistant, Enhanced Physical Properties, Low Moisture Absorption, Consistent High Quality, Heat Resistance
Woven glass fabric combined with a high temperature polyimide resin system engineered to maintain excellent physical properties at 240°C. P95 has a low coefficient of thermal expansion, high mechanical strength and excellent heat resistance. Certification to IEC standard is pending.
Norplex-Micarta
Norplex-Micarta NP320E
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1340.0 - 1340.0 kg/m³
Features:
Reduced Noise, Wear Resistant, Good Moisture Resistance, Good Electrical Properties, Good Machinability
Similar to NP320 with improved moisture resistance. It is suitable for electrical applications in moderate humidity conditions. NP320E meets or exceeds the requirements of MIL-I-24768/13 and ASTM F2953-12 Type FB. Certification to IEC standard is pending.
Show
36
of 1,838 results
Go to page
1
2
3
4
5
6
7
8
9
10