Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Parts, Shapes & Films
Products in Parts, Shapes & Films
1,837 Products found in Parts, Shapes & Films
Filters
Suppliers
Applications
Physical Form
Polymer Name
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Mitsubishi Chemical Group Corporation
Nylatron® GF30 PA66
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Tube, Plates, Rods
Features:
Creep Resistant, Excellent Stiffness, Heat Stabilized, Good Mechanical Properties, Wear Resistant, High Strength, Excellent Toughness, Good Electrical Properties, Dimensional Stability
Density:
1290.0 - 1290.0 kg/m³
Tensile Modulus:
5000.0 - 5000.0 MPa
Nylatron® GF30 and Ertalon® 66 GF30 - the ultimate solution for high-performance industrial applications. Our heat-stabilized, 30% glass fiber-reinforced polyamide PA66 offers a unique combination of increased strength, stiffness, creep resistance, and dimensional stability while maintaining its exceptional wear resistance properties.Features:High mechanical strength, stiffness, hardness and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding properties and excellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Ideal for sleeve and slide bearings, wear pads, rollers, pulleys, scrapers, gear wheels, sprockets, star wheels, and insulatorsCan withstand high maximum service temperaturesOffers lower maintenance costs and longer service lifeEasy to machineApplications:Sleeve and slide bearingsWear padsRollersPulleysScrapersGear wheelsSprocketsStar wheelsInsulatorsUpgrade your industrial components with Nylatron® GF30 and Ertalon® 66 GF30 for improved strength, durability, and performance in even the toughest of environments."
Mitsubishi Chemical Group Corporation
Duratron® PI D7015G
Polymer Name:
Polyimide (PI)
Physical Form:
Rods, Tube, Plates
Features:
Temperature Resistance, Lubricated, Bearing Grade, Low Coefficient of Friction, Wear Resistant, High Tolerance
Density:
1460.0 - 1460.0 kg/m³
Tensile Modulus:
4200.0 - 4200.0 MPa
Color:
Black
Duratron® D7015G PI Polyimide is a high-performance bearing grade material that offers exceptional temperature and wear resistance. With a low coefficient of friction, this material is ideal for use in applications where high loads and speeds are a critical factor.Features:15% graphite added for long wear and frictionSuperior temperature and wear resistanceLow coefficient of frictionMaintains performance abilities with or without lubricationBenefits:Excellent choice for bearing, bushing, and seal applications where higher loads or speeds are a significant factorProvides long-lasting performance in harsh environmentsLow maintenance and long-lasting partsApplications:Bearings and bushings in high-temperature environmentsSeals for high-speed or high-load applicationsMachine parts and components in harsh environments where temperature and wear resistance are needed.
Mitsubishi Chemical Group Corporation
Techtron® PSBG PPS
Polymer Name:
Polyphenylene Sulfide (PPS)
Physical Form:
Rods, Plates
Features:
Lubricated, Low Thermal Expansion, Dimensional Stability, Corrosion Resistant, Chemical Resistant, Wear Resistant, High Tolerance, Electrically Conductive
Density:
1520.0 - 1520.0 kg/m³
Tensile Modulus:
6340.64 - 6340.64 MPa
Color:
Black
Techtron® PSBG is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added strength and durability of carbon fiber reinforcement. This compression-molded material is internally lubricated and designed to excel in wear applications where an electrically conductive material is required.Key features:Excellent wear resistance: internally lubricated and carbon fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesExtreme chemical and corrosion resistance: ideal for use in demanding environmentsLow coefficient of linear thermal expansion: making it suitable for applications where dimensional stability is criticalElectrically conductive: ideal for wear applications that require electrical conductivityBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion and wearEnhanced precision and dimensional stabilityImproved electrical conductivityApplications:Bushings and bearings, lantern rings, and pump wear components in the oil and gas industryElectrical components as it is electrically conductiveAutomotive and aerospace components as it can withstand high temperatures.Wear-resistant components in general, as it is internally lubricated and reinforced with carbon fiberTechtron® PSBG is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, making it easy to incorporate into your designs.
Mitsubishi Chemical Group Corporation
Ertalyte® Sterra™ PET
Polymer Name:
Polyethylene Terephthalate (PET)
Color:
Black
Physical Form:
Rods, Bars
Ertalyte® Sterra™ PET is an unreinforced, semi-crystalline grade that is produced from proprietary resin grades made by Mitsubishi Chemical Advanced Materials. Characterized by its excellent wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, this grade is capable of sustaining high loads and retains more of its original strength up to 180°F (85°C) than nylons or acetals. Due to these characteristics, Ertalyte® Sterra™ PET components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing and packaging, and oil and gas industries. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Ertalon® 66 SA PA66
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Tube, Plates, Rods
Features:
Food Contact Acceptable, Excellent Stiffness, High Melting Point, Wear Resistant, High Strength, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability, X-Ray Shielding, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance
Density:
1140.0 - 1140.0 kg/m³
Tensile Modulus:
3550.0 - 3550.0 MPa
Ertalon® 66 SA / Nylatron® 101 Polyamide PA66 unmodified shapes are characterized by their superior combination of strength and toughness. Compared to other unmodified nylon grades, Nylatron® 101 PA66 / Ertalon® 66 SA PA66 components possess superior mechanical strength, stiffness, wear resistance, in addition to displaying one of the highest melting points of all PA66 materials. Due to these properties, and this grade’s FDA and EU food compliant composition, Nylatron® 101 PA66 / Ertalon® 66 SA PA66 is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels, and seals.
Mitsubishi Chemical Group Corporation
Ketron® 1000 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Tube, Plates, Rods
Features:
Ductile, General Purpose, Steam Resistant, Excellent Aesthetics, Wear Resistant, High Tolerance, High Elongation, Excellent Toughness, High Performance, Chemical Resistant
Density:
1310.0 - 1310.0 kg/m³
Tensile Modulus:
4300.0 - 4300.0 MPa
Color:
Tan, Black
Ketron® 1000 PEEK is a high-performance polymer that offers excellent mechanical properties and chemical resistance. It is widely used in a variety of applications where high strength and stiffness, low friction, and excellent dimensional stability are required. This material is ideal for instrument and seal components, where its high elongation and toughness make it an excellent choice. Its non-toxic and biocompatible properties make it suitable for use in medical and food processing applications. Key features: High strength and stiffness Low friction Excellent dimensional stability High elongation and toughness EU 10/2011 and FDA compliant Benefits: Improved performance and durability of components Increased resistance to chemicals and high temperatures Enhanced biocompatibility and safety in medical and food processing applications Greater design flexibility and compatibility with a wide range of applications and industries Application: Structural parts: Ketron® PEEK is often used for structural components that are subject to high temperatures and chemical exposure. For example, it is commonly used for vacuum wand handles in semiconductor manufacturing. Bushings, bearings, seals, and back-up rings: Ketron® PEEK is an excellent choice for components that are subject to wear and tear. Its low coefficient of friction and high strength make it suitable for use in a wide range of applications, from aircraft to oil field drilling. Ketron® 1000 PEEK is available in a range of shapes and sizes, making it easy to incorporate into your designs. It is a versatile and reliable material that can help improve the performance and longevity of your products.
Mitsubishi Chemical Group Corporation
Duratron® U2200 PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
Food Contact Acceptable, Low Thermal Expansion, Low Odor, Amorphous, High Tolerance, Dimensional Stability, High Strength to Weight Ratio, High Temperature Resistance, High Tensile Strength, High Rigidity
Density:
1410.0 - 1410.0 kg/m³
Color:
Brown
Duratron® U2200 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional rigidity, dimensional stability, high temperature resistance, and a low Coefficient of Linear Thermal Expansion. With 20% glass-reinforcement, Duratron® U2200 PEI is a versatile and durable material that is suitable for a wide range of applications.Features:20% glass-reinforced for exceptional rigidity and dimensional stabilityHigh temperature resistanceLow Coefficient of Linear Thermal ExpansionExceptional strength-to-weight ratio and increased tensile strengthGreat electrical insulatorBenefits:Versatile and durable material that can withstand harsh conditionsIdeal for semiconductor and electronics applications where dimensional stability, low thermal expansion and electrical insulation is importantSuitable for a wide range of applicationsApplications:Semiconductor and electronics applicationsElectrical insulationApplications that require dimensional stability, high temperature resistance and low thermal expansionDuratron® U2200 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your semiconductor and electronics applications or need a material that can withstand high temperatures and harsh environments while providing electrical insulation, Duratron® U2200 PEI is the ideal solution.
Mitsubishi Chemical Group Corporation
Fluorosint® MT-01 PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Plates, Rods
Features:
High Temperature Strength, Good Mechanical Properties, Good Stability, High Strength, High Tolerance, Anti-Wear Properties, Odorless, High Performance, High Stiffness
Density:
2270.0 - 2270.0 kg/m³
Tensile Modulus:
1900.0 - 1900.0 MPa
Color:
Black
Fluorosint® MT-01 is an advanced polymer material that combines the excellent chemical resistance, low friction and high temperature properties of PTFE (polytetrafluoroethylene) with the added strength, stiffness and stability. This material is designed to excel in demanding applications where high performance and reliability are required.Key features:High strength and stiffness: provides superior mechanical performance at elevated temperaturesPTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:High-performance seat, seal and wear applications where extreme conditions are present such as high temperature, pressure and chemical exposureComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high chemical resistance, low friction, and high temperature properties such as valves, pumps, and heat exchangers.Fluorosint® MT-01 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. It's also important to mention that the temperature and chemical resistance can vary depending on the grade of PTFE used as well as other additives, always consult with the manufacturer for the exact properties of the final material.
Mitsubishi Chemical Group Corporation
Nylatron® LIG PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
Low Coefficient of Friction, High Strength, Self Lubricating, Lubricated, Excellent Toughness, Good Electrical Properties, Good Mechanical Properties
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Nylatron® LIG Polyamide PA6, a self-lubricating, oil-filled nylon that is the perfect solution for industrial applications in the conveying and processing industries. With its unique combination of features, this material offers a range of benefits for a variety of applications.Features:Self-lubricating, oil-filled nylonHigher toughness and limiting pressure velocity when compared to unfilled gradesLow coefficient of frictionBenefits:Enhances load bearing performance and reduces the coefficient of frictionProvides a solution for industrial applications in the conveying and processing industriesApplications:Ideal for use in bushings, bearings, roller wheels, and valve seats and sealsSuitable for use in a wide range of industrial applications where self-lubricating materials are required.
Mitsubishi Chemical Group Corporation
Duratron® T5530 PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Tube, Plates, Rods
Features:
High Rigidity, Good Stiffness, Creep Resistant, Temperature Resistance, Low Thermal Expansion, High Tolerance, High Loading Absorption Capability, Odorless, Good Electrical Properties, Dimensional Stability
Density:
1600.0 - 1600.0 kg/m³
Tensile Modulus:
6892.0 - 6892.0 MPa
Duratron® T5530 PAI is a high-performance, glass-reinforced polyamide-imide material that offers exceptional rigidity, retention of stiffness, low thermal expansion, and outstanding load-carrying capabilities. This 30% glass-reinforced grade is ideal for structural applications in the semiconductor, electronics, and aerospace industries, where high strength, stiffness, and dimensional stability are required.Features:High rigidity and retention of stiffnessLow thermal expansionOutstanding load-carrying capabilities30% glass reinforced for added strength and stiffnessBenefits:Suitable for structural applications in harsh environmentsOffers exceptional dimensional stability up to 260°CIdeal for precision parts in the electronic and semiconductor industriesApplications:Aerospace and defenseSemiconductor and electronicsIndustrial machinery and equipmentMedical devicesPrecision parts in high-temperature environmentsNote: The suitability of Duratron T5530 PAI for sliding parts should be carefully evaluated as the glass fibers may cause abrasion to the mating surface.
Mitsubishi Chemical Group Corporation
Semitron® ESd 420V PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Rods, Tube, Plates
Features:
Dimensional Stability, High Stiffness, ESD Protection, High Strength, High Tolerance, Static-Dissipative, Odorless
Density:
1480.0 - 1480.0 kg/m³
Tensile Modulus:
5450.0 - 5450.0 MPa
Color:
Black
Semitron® ESd 420V PEI Polyetherimide electro static dissipative shapes, a high-performance material designed for use in the semiconductor and electronics industries. With its unique combination of properties, this grade offers a range of benefits for device handling and test applications.Features:High strength and stiffness, making it suitable for extreme structural applicationsExcellent resistivity in the 10E5 to 10E8 ohms per square range, ensuring reliable electrostatic dissipationHeat deflection temperature of 419° F / 215° C, making it suitable for high temperature environmentsNot subject to dimensional change as a result of exposure to moistureBenefits:Suitable for use in a range of applications within the semiconductor and electronics industriesOffers reliable performance in extreme conditionsCost-effective alternative for applications that do not require the thermal performance of ultra-high performance materialsApplications:Device handling and test applications within the semiconductor and electronics industriesSuitable for use in high temperature environments, including extreme structural applications.
Mitsubishi Chemical Group Corporation
Ertalon® LFX PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
X-Ray Shielding, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, Excellent Stiffness, Lubricated, Wear Resistant, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability
Density:
1140.0 - 1140.0 kg/m³
Tensile Modulus:
3000.0 - 3000.0 MPa
Ertalon® LFX PA6 / Nylatron® LFX Polyamide PA6 internally lubricated shapes are specially formulated to withstand the demands of unlubricated, highly loaded, and slowly moving parts applications. This high-performance material offers a unique combination of mechanical properties, including high strength, stiffness, hardness, and toughness, as well as excellent sliding properties, high mechanical damping capabilities, and exceptional electrical insulation properties.Features:Internally lubricatedHigh mechanical strength, stiffness, hardness, and toughnessExcellent sliding propertiesHigh mechanical damping capabilitiesExceptional electrical insulating propertiesBenefits:Can withstand the demands of unlubricated, highly loaded, and slowly moving parts applicationsOffers a unique combination of mechanical propertiesProvides excellent performance in extreme conditionsMinimizes the need for external lubricationApplications:Pharmaceutical, biotechnology, medical, and processing marketsIdeal for use in unlubricated, highly loaded, and slowly moving parts applications such as gears, bearings, and bushingsCan be used in a wide range of industries where high performance, durability, and low maintenance are required.
Mitsubishi Chemical Group Corporation
Nylatron® LFX PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
X-Ray Shielding, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, Excellent Stiffness, Lubricated, Wear Resistant, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability
Density:
1140.0 - 1140.0 kg/m³
Tensile Modulus:
3000.0 - 3000.0 MPa
Nylatron® LFX Polyamide PA6, a specially formulated internally lubricated material designed for unlubricated, highly loaded, and slowly moving parts applications. This advanced material offers a range of exceptional properties that make it a top choice for various industries, including pharmaceutical, biotechnology, medical, and processing.Features:Internally lubricated for unlubricated, highly loaded, and slowly moving parts applicationsHigh mechanical strength, stiffness, hardness, and toughnessGreat sliding propertiesHigh mechanical damping capabilitiesExceptional electrical insulating propertiesBenefits:Excellent wear resistance and easy machiningLow coefficient of frictionHigher values of PV (pressure / velocity)Good resistance to high energy radiations (Gamma and X Rays)High mechanical damping capacityGood sliding and thermal insulation propertiesApplications:Pharmaceutical, biotechnology, medical and processing industriesIdeal for use in gears, bearings, sprockets, and sheavesSuitable for use in various machinery and equipment
Mitsubishi Chemical Group Corporation
Nylatron® GSM PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
Low Coefficient of Friction, High Strength, High Loading Absorption Capability, Excellent Toughness, Good Electrical Properties, High Impact Resistance, Good Mechanical Properties
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Nylatron® GSM Polyamide PA6, a unique material that combines the benefits of Molybdenum Disulphide (MoS2) with the impact resistance of cast nylon products. This material is specifically designed to enhance load-bearing capabilities while maintaining its strength and toughness.Features:Contains finely divided particles of Molybdenum Disulphide (MoS2)Enhances load-bearing capabilitiesMaintains impact resistance inherent to cast nylon productsPossesses an ideal combination of strength and toughnessExhibits excellent mechanical and electrical propertiesBenefits:Can withstand high pressure and heavy loadsResistant to impact and wearProvides stability and durability in various applicationsCan be used in high-precision and automated equipmentApplications:GearsBearingsSprocketsSheavesConstruction and heavy equipment marketsNylatron® GSM Polyamide PA6 is an ideal solution for industries that require materials with high load-bearing capabilities, excellent impact resistance, and strong mechanical and electrical properties.
Mitsubishi Chemical Group Corporation
Ertacetal® H-TF POM-H
Polymer Name:
Polyacetal Homopolymer (POM)
Physical Form:
Plates
Features:
Excellent Stiffness, Lubricated, Low Moisture Absorption, Low Coefficient of Friction, Wear Resistant, High Strength, Improved Wear, Slip, Soft, Good Machinability, Good Sliding Properties, Low Friction
Density:
1500.0 - 1500.0 kg/m³
Tensile Modulus:
3100.0 - 3100.0 MPa
Ertacetal H-TF (POM-H + PTFE) is a Delrin® AF Blend, a combination of PTFE fibers evenly dispersed in a Delrin acetal resin. This material offers superior sliding properties, making it ideal for bearings, gears, and other low-friction applications. Compared to Ertacetal C and H, Ertacetal H-TF offers improved performance and longer wear life.Features:Low friction, long wearingHigh strength and toughnessHigh dimensional stability and machinabilityPTFE fibers evenly dispersed in a Delrin acetal resinBenefits:Reduced stick-slip behavior in bearings and other low-friction applicationsIncreased wear resistance and longer lifespanImproved performance in harsh environmentsFood-contact compliant for use in the food processing and packaging industryApplications:BearingsGearsPulleysConveyor wear partsAny other low-friction application requiring high strength and dimensional stability.
Mitsubishi Chemical Group Corporation
Nylatron® MC 901 H.S. PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Plates, Rods
Features:
Good Sliding Properties, Good Thermal Stability, High Rigidity, High Hardness, Heat Stabilized, Good Mechanical Properties, Wear Resistant, High Strength, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness, Good Electrical Properties, Electrically Insulating
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Color:
Blue
Nylatron® MC 901 Heat Stabilized (HS) Polyamide PA6 shapes are a durable and versatile solution for industrial applications that require long-term thermal stability and high mechanical properties.Features:Long-term thermal stability up to 260° F (126° C)Outstanding mechanical strength, rigidity, hardness, and toughnessGreat sliding properties and wear resistanceSuperior resistance to high-energy radiationExcellent electrical insulationBenefits:Provides reliable performance in high temperature environmentsResists wear and tear in industrial applicationsOffers high resistance to high-energy radiationProvides excellent electrical insulationApplications:Conveyor wear componentsBushingsSheavesWear padsValve seats and sealsCustom parts and gearswheels
Mitsubishi Chemical Group Corporation
Duratron® U1000 PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Rods
Features:
Food Contact Acceptable, Heat Resistance, Flame Retardant, High Strength, Excellent Dielectric Properties, Amorphous, High Tolerance, Odorless, Excellent Hydrolysis Resistance, Dimensional Stability, Chemical Resistant
Density:
1300.0 - 1300.0 kg/m³
Tensile Modulus:
6000.0 - 6000.0 MPa
Color:
Transparent, Amber
Duratron® U1000 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional strength, dimensional stability, and flame and heat resistance. With the ability to perform continuously to 340°F / 170°C, Duratron® U1000 PEI is the ideal solution for applications that require consistent dielectric properties over a wide frequency range.Features:High strengthDimensional stabilitySuperior flame and heat resistancePerform continuously to 340°F / 170°CHydrolysis and chemical resistanceBenefits:Suitable for a variety of applications requiring high strength and rigidity at elevated temperaturesCan withstand repeated autoclaving cycles making it ideal for medical, pharmaceutical, and biotechnology marketsHydrolysis and chemical resistance make it suitable for electrical / electronic insulators and semiconductor process componentsApplications:Medical and pharmaceutical industryBiotechnology marketElectrical / electronic insulatorsSemiconductor process componentsStructural components requiring high strength and rigidity at elevated temperaturesDuratron® U1000 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your medical, pharmaceutical, or biotechnology applications or need a material suitable for electrical/electronic insulators and semiconductor process components, Duratron® U1000 PEI is the ideal solution.
Mitsubishi Chemical Group Corporation
Altron™ LSG PC
Polymer Name:
Polycarbonate (PC)
Physical Form:
Plates, Rods
Features:
No Animal Derived Components, Biocompatible, Gamma Sterilizable, Hydrocarbon Resistant, Life Science Grade, Plasma Gas Sterilizable, Excellent Dielectric Properties, Acid Resistant, Alkali Resistant, Ethylene Oxide Sterilizable, Odorless, Excellent Toughness, Impact Resistance, Hot Water Resistant, X-Ray Sterilizable
Density:
1200.0 - 1200.0 kg/m³
Tensile Modulus:
2400.0 - 2400.0 MPa
Color:
Transparent
Altron™ LSG PC is a polymer made from polycarbonate (PC) and is available in the form of plates and rods. It boasts a wide range of features, including hydrocarbon resistance, ethylene oxide sterilizability, impact resistance, hot water resistance, biocompatibility, X-ray sterilizability, alkali resistance, excellent toughness, life science grade, no animal-derived components, gamma sterilizability, odorlessness, excellent dielectric properties, and acid resistance. Transparent in color, it finds applications in medical devices and assemblies, as well as in housings and enclosures, including those for medical device housings, analyzers, and bioreactor equipment.
Mitsubishi Chemical Group Corporation
Sultron® LSG FG R5100 PPSU
Polymer Name:
Polyphenylsulfone (PPSU)
Physical Form:
Plates, Rods
Features:
High Ductility, Biocompatible, Gamma Sterilizable, Life Science Grade, Plasma Gas Sterilizable, Acid Resistant, Alkali Resistant, Steam Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Excellent Hydrolysis Resistance, Excellent Sterilization Resistance, X-Ray Sterilizable
Density:
1290.0 - 1290.0 kg/m³
Tensile Modulus:
2450.0 - 2450.0 MPa
Color:
Black
Sultron® LSG FG R5100 PPSU is a product available in the form of plates and rods, and it possesses various important features. These include being ethylene oxide sterilizable, biocompatible, excellent sterilization resistance, X-ray sterilizable, alkali resistant, life science grade, gamma sterilizable, steam sterilizable, acid resistant, heat sterilizable, plasma gas sterilizable, excellent hydrolysis resistance, and high ductility. It comes in the color black and finds applications in equipment and parts, implants and prosthetics, medical devices and assemblies, surgical instruments, and trays, as well as connectors in the medical field.
Mitsubishi Chemical Group Corporation
Nylatron® MC® 907 PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
Heat Aging Resistant, High Hardness, Food Contact Acceptable, Creep Resistant, Heat Stabilized, Good Mechanical Properties, Wear Resistant, High Strength, Excellent Toughness, Good Electrical Properties, Good Machinability
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3600.0 - 3600.0 MPa
Nylatron® MC 907 PA6 and Ertalon® 6PLA PA6 are unmodified cast nylon 6 grades that offer the highest strength and hardness of all nylon 6 grades. They exhibit great creep and wear resistance, heat aging properties, and machinability capabilities, making them ideal for the food processing and packaging industry.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding properties and excellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma- and X-rays)Good machinabilityBenefits:High strength and hardness for maximum durability and longevityExcellent creep and wear resistance for minimal maintenance and replacement costsHeat aging properties ensure long-term performance in high-temperature environmentsGood machinability for easy customization and shapingFDA and EU food contact compliant composition for safe and hygienic use in food processing and packaging applicationsApplications:GearsRollersWheelsBearingsConveyor wear partsAnd more in the food processing and packaging industry.
Mitsubishi Chemical Group Corporation
Nylatron® 66 SA FR PA66
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Rods, Plates
Features:
Flame Retardant, High Limiting Pressure Velocity, Low Temperature Impact Resistance, Low Moisture Absorption
Density:
1160.0 - 1160.0 kg/m³
Tensile Modulus:
3900.0 - 3900.0 MPa
Nylatron® SA Flame Retardant (FR) Polyamide PA66 shapes were specifically developed to meet the requirements of the plastic flammability test, as outlined in UL 94 and EN 45545-2 regulations. This grade of Nylatron® is designed for applications within the transportation and railway markets, and is ideal for use in cable holders, clamps, channels, and connections/sockets.Features:Universally flame retardantFully compliant with REACHLow moisture absorptionAbsence of heavy metals and halogens – RoHS compliantBenefits:Meets V-0 criteria from a thickness of 1mmCompliant with the EN 45545-2 regulation, a standard specific to railway applicationsSuitable for use in transportation and railway marketsApplications:Cable holdersClampsChannelsConnections / socketsAdditional Note: Parts manufactured from Nylatron 66SA FR can be disposed according to WEEE.
Mitsubishi Chemical Group Corporation
Duratron® PEI U2300
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
High Tensile Strength, High Rigidity, Food Contact Acceptable, Low Thermal Expansion, Heat Resistance, Flame Retardant, Low Odor, High Strength, Amorphous, High Tolerance, Dimensional Stability, High Strength to Weight Ratio
Density:
1510.0 - 1510.0 kg/m³
Tensile Modulus:
5513.6 - 5513.6 MPa
Color:
Brown
Duratron® U2300 PEI, a flame resistant Polyetherimide that offers exceptional rigidity, strength, dimensional stability, and heat resistance. With 30% glass-reinforcement, Duratron® U2300 PEI is the most durable and high-performance plastic offered in the Duratron® PEI line.Features:30% glass-reinforced for highest rigidity, strength, dimensional stability, and heat resistanceFlame resistantLowest Coefficient of Linear Thermal ExpansionSuperior strength-to-weight ratio and tensile strengthBenefits:Ideal for reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, and structural components that require high strength and rigidity at elevated temperaturesCan withstand harsh conditions and high temperaturesSuitable for a wide range of applicationsApplications:Reusable medical devicesAnalytical instrumentsElectrical insulatorsSemiconductor process componentsStructural components that require high strength and rigidity at elevated temperaturesDuratron® U2300 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions and high temperatures. Whether you are looking to improve the performance of your reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, or need a material that can withstand high temperatures and harsh environments, Duratron® U2300 PEI is the ideal solution. Try it today and experience the difference for yourself!
Mitsubishi Chemical Group Corporation
Semitron® ESd 410C PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
ESD Protection, High Tolerance, Static-Dissipative, Odorless, Low Water Absorption, Low Thermal Expansion, Dimensional Stability
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
5850.0 - 5850.0 MPa
Color:
Black
Semitron® ESd 410C PEI Polyetherimide electro static dissipative shapes are the perfect solution for semiconductor and electronics handling environments. These shapes offer exceptional dimensional stability and can withstand temperatures up to 410º F without degradation. The unique properties of Semitron® ESd 410C PEI make it ideal for a wide range of applications, including handling tray, circuit board, hard disk drive, and sensitive processing equipment applications.Features:Surface resistivity of 104 - 106 ohms/sq.Thermal performance to 210 °C (410 °F)Low stress for tight tolerance machiningHigh strength and stiffnessBenefits:Excellent dimensional stabilityResistant to high temperaturesLow stress for tighter tolerances during machiningReduced coefficient of linear thermal expansionMinimal water absorptionApplications:Handling Trays: Trays manufactured from Semitron® ESd 410C dissipate static charges reliably and are dimensionally stable. (Prior materials: PPS, PEEK, Vespel® PI)Circuit Boards: Semitron ESd 410C is ideal for use in circuit boards as it offers excellent dimensional stability and can withstand high temperatures without degradation.Hard Disk Drives: Semitron ESd 410C is an ideal material for use in hard disk drives due to its high strength, low stress properties and exceptional dimensional stability.Sensitive Processing Equipment: Semitron ESd 410C offers low stress properties, minimal water absorption and high strength making it an ideal choice for use in sensitive processing equipment.
Mitsubishi Chemical Group Corporation
Duratron® CU60 PBI
Polymer Name:
Polybenzimidazole (PBI)
Physical Form:
Tube, Plates, Rods
Features:
Wear Resistant, High Tolerance, High Loading Absorption Capability, Odorless, Heat Resistance, Thermally Insulating, Good Mechanical Properties
Density:
1300.0 - 1300.0 kg/m³
Tensile Modulus:
6000.0 - 6000.0 MPa
Color:
Black
Duratron® CU60 PBI, the ultimate engineering plastic for high-performance applications. This advanced material is made from Polybenzimidazole (PBI) and is the highest performing engineering plastic offered by Mitsubishi Chemical Advanced Materials. With superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°C, Duratron® CU60 PBI is the ideal choice for applications where extreme temperatures and high loads are present.Features:Superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°CBetter wear resistance and load carrying capabilities at extreme temperatures than any other reinforced or unreinforced advanced engineering plastic"Clean" in terms of ionic impurity and does not outgas (except water)Excellent ultrasonic transparency, making it an ideal choice for probe tip lenses in ultrasonic measuring equipmentExcellent thermal insulation, other plastics in melt do not stick to Duratron CU60 PBIBenefits:Duratron® CU60 PBI offers unmatched performance in high-heat applications, making it ideal for high heat bushings, connectors, valve seats, and probe tip lenses in semiconductor manufacturingIts superior wear resistance and load carrying capabilities make it a great choice for aerospace and other high-performance industriesIts "clean" characteristics make it ideal for use in vacuum chamber applications in semiconductor manufacturingIts excellent thermal insulation and non-stick properties make it ideal for contact seals and insulator bushings in plastic production and molding equipmentDuratron CU60 PBI is an ideal replacement for metals and ceramics in pump components, valve seats, bearings, rollers, and high-temperature insulatorsApplications:High-performance vacuum chamber applications in semiconductor manufacturingAerospace and other high-performance industriesHigh heat bushings, connectors, valve seats, and probe tip lensesContact seals and insulator bushings in plastic production and molding equipmentPump components, valve seats, bearings, rollers, and high-temperature insulatorsCritical components to decrease maintenance costs and to gain valuable production "uptime".
Mitsubishi Chemical Group Corporation
Acetron® AF Blend POM-H
Polymer Name:
Polyacetal Homopolymer (POM)
Physical Form:
Rods, Tube, Plates
Features:
Excellent Stiffness, Lubricated, Good Machinability, Low Moisture Absorption, Low Coefficient of Friction, Wear Resistant, High Strength, Improved Wear
Density:
1500.0 - 1500.0 kg/m³
Tensile Modulus:
3100.0 - 3100.0 MPa
Acetron® AF Blend POM-H - the ultimate solution for enhanced wear resistance in conveying and material handling applications. Made from PTFE-filled Homopolymer, Acetron® AF offers a unique combination of properties that make it stand out from other acetal grades. With a low coefficient of friction and great wear performance in wet environments, this material is perfect for bushings, bearings, electrical components, and rollers.Features:Enhanced wear resistanceLow coefficient of frictionGreat wear performance in wet environmentsLow moisture absorptionBenefits:Operates at higher speeds with reduced wearDimensional stability even in wet environmentsSuitable for food-contact applicationsApplications:Conveying and material handling environmentsBushings, bearings, electrical components, and rollers.
Mitsubishi Chemical Group Corporation
Fluorosint® HPV PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Rods, Plates
Features:
High Performance, Bearing Grade, High Viscosity, High Tolerance, High Loading Absorption Capability, Food Contact Acceptable, Anti-Wear Properties, Odorless
Density:
2060.0 - 2060.0 kg/m³
Tensile Modulus:
1200.0 - 1200.0 MPa
Color:
Tan
Fluorosint® HPV is an advanced polymer material that combines the excellent chemical resistance and low friction properties of PTFE (polytetrafluoroethylene) with added strength, stiffness, and wear resistance, making it ideal for high-performance bearing applications.Key features:High PV (pressure-velocity) and low “k” or wear factor: Optimized for high performance and durability in bearing applicationsFDA Compliant: Suitable for use in food processing and pharmaceutical applicationsHigh strength and stiffness: Can handle heavy loads and high speedsFDA Compliant : Suitable for applications where food contact compliance may be requiredBenefits:High performance and durability in bearing applications: Enables equipment to run efficiently and safelyFDA Compliance: Provides new design options for food processing and pharmaceutical applicationsHigh strength and stiffness: Can handle heavy loads and high speeds, making it ideal for demanding applicationsImproved reliability and safety in critical applications.Application:Bearing applications where high PV and low “k” or wear factor are neededFood processing and pharmaceutical applications where FDA compliance is requiredAny application that requires high performance and durability in harsh environmentsFluorosint® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's FDA compliant, making it suitable for food processing and pharmaceutical applications, it's ideal for high-performance bearing applications and it's available in custom shapes for efficient production. With its excellent chemical resistance, low friction, and high performance in harsh environments, Fluorosint® HPV is an excellent choice for equipment manufacturers looking to improve the performance and safety of their products.
Mitsubishi Chemical Group Corporation
Duratron® LSG PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
Food Contact Acceptable, Biocompatible, Good Mechanical Properties, Gamma Sterilizable, Hydrolysis Resistant, Life Science Grade, Plasma Gas Sterilizable, Steam Sterilizable, Ethylene Oxide Sterilizable, Excellent Thermal Properties, High Performance, Heat Sterilizable, Good Electrical Properties, Chemical Resistant, X-Ray Sterilizable
Density:
1280.0 - 1280.0 kg/m³
Tensile Modulus:
3500.0 - 3500.0 MPa
Color:
Translucent, Amber, Black, Blue
Duratron® LSG PEI is a product available in the form of plates and rods and offers a range of valuable features such as good electrical properties, ethylene oxide sterilizability, biocompatibility, hydrolysis resistance, X-ray sterilizability, life science grade, gamma sterilizability, good mechanical properties, food contact acceptability, steam sterilizability, high performance, heat sterilizability, plasma gas sterilizability, excellent thermal properties, and chemical resistance. It comes in a variety of colors including black, translucent, blue, and amber. This versatile material is suitable for a wide range of applications, including implants and prosthetics, medical devices and assemblies, and food and beverage packaging.
Mitsubishi Chemical Group Corporation
Fluorosint® 207 PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Plates, Rods
Features:
Low Permeability, Food Contact Acceptable, Creep Resistant, Low Coefficient of Friction, High Tolerance, Anti-Wear Properties, Odorless, Excellent Hydrolysis Resistance, Dimensional Stability, Chemical Resistant, Good Sliding Properties
Density:
2300.0 - 2300.0 kg/m³
Tensile Modulus:
1450.0 - 1450.0 MPa
Color:
White
Fluorosint® 207 is an advanced polymer material that combines the excellent chemical resistance, low friction, and high temperature properties of PTFE (polytetrafluoroethylene) with added food contact compliance and unique combination of dimensional stability and creep resistance. This material is designed to excel in demanding applications where high performance, reliability and food contact compliance are required.Key features:Low coefficient of friction: provides excellent wear and deformation resistanceFood Contact Compliant (FDA): safe for use in food and pharmaceutical applicationsHigh dimensional stability and creep resistance: ensures consistent performance over timePTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionBenefits:Low coefficient of friction, making it ideal for aggressive service bearing and bushing applicationsFood Contact Compliance (FDA), allowing for use in food and pharmaceutical industriesHigh dimensional stability and creep resistance, ensuring consistent performance over timeEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Food and pharmaceutical applications where FDA compliance is requiredLow friction bearing and bushing applications in aggressive service environmentsLower pressure seats and seals, where virgin PTFE failsChemical processing industries where high chemical and hydrolysis resistance is neededAny application that requires low friction and dimensional stability in harsh environments.Fluorosint® 207 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. With its added food contact compliance and unique properties, Fluorosint® 207 is an excellent choice for applications in food, pharmaceutical and chemical processing industries.
Mitsubishi Chemical Group Corporation
Ertacetal® C LQ POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Plates, Rods
Features:
Good Sliding Properties, High Hardness, Exceptional Resilience, Creep Resistant, Excellent Stiffness, Enhanced Physical Properties, High Thermo-Oxidative Stability, Laser Markable, Hydrolysis Resistant, Wear Resistant, Excellent Mechanical Strength, Excellent Dielectric Properties, Alkali Resistant, Low Water Absorption, Electrically Insulating, Good Machinability, Dimensional Stability
Density:
1430.0 - 1430.0 kg/m³
Tensile Modulus:
3100.0 - 3100.0 MPa
Color:
White
Ertacetal® C LQ - the ultimate solution for laser technology applications. Made from Polyoxymethylene (POM-C), this specialized grade is specifically designed to show markings with common laser technologies such as IR-YAG and UV-YAG. Unlike standard POM-C, which only experiences burning but no visible dark marking, Ertacetal® C LQ POM-C offers a bright-white, less transparent color that makes it perfect for laser marking, engraving, and cutting applications.Features:Bright-white, less transparent color for improved laser marking visibilityIdentical physical properties and machinability as standard Ertacetal® C natural POM-CProcessed by extrusion technology for consistent, high-quality performanceBenefits:Provides clear and precise markings with common laser technologiesCan be used in a wide range of laser technology applications such as engraving, cutting and markingHigh-quality and consistent performanceApplications:Laser technology applications such as engraving, cutting and markingIndustrial manufacturing and production processesMedical and diagnostic equipmentElectrical and electronic components
Mitsubishi Chemical Group Corporation
Nylatron® NSM PA6
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Tube, Plates, Rods
Features:
Wear Resistant, High Loading Absorption Capability, Self Lubricating, Lubricated
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Nylatron® NSM Polyamide PA66 is a high-performance thermoplastic that is designed to provide exceptional wear resistance and long-term durability in a wide range of industrial applications. This solid lubricant-filled, proprietary cast nylon formulation offers superior self-lubricating properties, outstanding friction behavior, maximum wear resistance, and excellent dynamic load-bearing capacities that are up to five times higher than conventional cast nylon grades.Features:The most wear-resistant thermoplastic availableSelf-lubricating with outstanding friction behaviorDynamic load-bearing capacity up to 5x higher than standard cast nylonsService life up to 10x longer than standard cast nylonsBenefits:Provides exceptional wear resistance and long-term durabilityIdeal for high-velocity applications requiring larger geometriesSuitable for a wide range of industrial applicationsApplications:BearingsGearsWear padsPulleysSheavesBushingsValve seatsSealsNylatron® NSM Polyamide PA66 is an ideal solution for industrial applications in the conveying and processing industries and other applications that require a high-performance thermoplastic material with superior wear resistance. This grade is often used as a solution for bearings, gears, wear pads, pulleys, sheaves, bushings, valve seats, and seals, and has the ability to last up to 10 times longer than standard nylon grades, making it a perfect choice for high-velocity, unlubricated moving parts requiring larger geometries.
Mitsubishi Chemical Group Corporation
Semitron® MDS 100
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
High Rigidity, Good Stability, Low Moisture Absorption, High Strength, High Tolerance, Odorless, Moisture Resistant, High Performance, Good Machinability, Dimensional Stability, High Stiffness
Density:
1510.0 - 1510.0 kg/m³
Tensile Modulus:
11000.0 - 11000.0 MPa
Color:
Grey
Semitron® MDS 100 modified Polyetheretherketone PEEK shapes offer a remarkable combination of strength, stiffness, and stability. This grade in particular was developed for use in uncontrolled application environments where a high level of precision is required. Due to this, Semitron® MDS 100 components are often used as test sockets, nests, and fixtures in test and package equipment throughout the semiconductor and electronics industry.Features:Remarkable combination of strength, stiffness, and stabilityDeveloped for use in uncontrolled application environments where a high level of precision is requiredMoisture absorption of 0.10% at 24 hrs. (per ASTM D570)Thermal performance to 210 °C (410 °F)Flexural modulus > 1,400,000 psiBenefits:Ideal for test sockets, nests and fixtures in test and package equipmentSuitable for use in semiconductor and electronics industryCan withstand harsh, uncontrolled environmentsLow moisture absorption ensures dimensional stabilityHigh thermal performance and flexural modulus ensures durability and precisionApplications:Test sockets, nests and fixtures in test and package equipmentOther applications in the semiconductor and electronics industry that require a high level of precision and stability in uncontrolled environments.
Mitsubishi Chemical Group Corporation
Acetron® H POM-H
Polymer Name:
Polyacetal Homopolymer (POM)
Physical Form:
Plates, Rods
Features:
High Hardness, Creep Resistant, Excellent Stiffness, Low Thermal Expansion, Low Moisture Absorption, Wear Resistant, High Strength, Excellent Mechanical Strength, Improved Wear, Good Machinability
Density:
1430.0 - 1430.0 kg/m³
Tensile Modulus:
3700.0 - 3700.0 MPa
Acetron® POM-H / Ertacetal® H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, and hardness, making it the ideal choice for a wide range of demanding applications. Its superior creep resistance and low thermal expansion rate make it stand out from copolymer acetal grades, making it the go-to material for small diameter, thin-walled bushings, bearings, gears, electrical components, medical and diagnostic equipment, valves, and fluid handling components.Features:Superior mechanical strength, stiffness, and hardnessExceptional creep resistanceLow thermal expansion rateHigh wear resistanceBenefits:Durable and long-lasting performanceEasy installation and removal with minimal distortionHigh resistance to chemical wearHigh impact strength, even at low temperaturesExcellent dimensional stabilityApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components
Mitsubishi Chemical Group Corporation
Duratron® T4503 PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Tube, Plates, Rods
Features:
High Strength, High Tolerance, Creep Resistant, Odorless, Low Thermal Expansion, Thermally Insulating, Dimensional Stability
Density:
1400.0 - 1400.0 kg/m³
Tensile Modulus:
3450.0 - 3450.0 MPa
Duratron® T4503 PAI Polyamide-imide is a compression molded material that offers exceptional electrical insulation properties and excellent dimensional stability. This grade is often selected for extreme applications where large geometries are required, such as dies or thermal insulators. It has a similar composition to Duratron® T4203 PAI and is known for its high compressive strength, elongation, and impact resistance.Features:Outstanding electrical insulation propertiesExcellent dimensional stabilityHigh compressive strength and elongationImpact resistanceBenefits:Suitable for extreme applications such as dies and thermal insulatorsCan be used for large geometriesCan be used for electrical connectors and insulatorsApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearHigh Temperature Electrical ConnectorsBearing CagesCan Mandrel
Mitsubishi Chemical Group Corporation
Zeniva® ZA-500 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Parts & Shapes, Plates, Rods
Features:
High Fatigue Resistance, X-Ray Transparent, Creep Resistant, Low Stress Shielding, Excellent Stiffness, High Loading Capacity, High Strength, Excellent Toughness, High Performance, Dimensional Stability, High Strain Capability
Density:
1290.0 - 1290.0 kg/m³
Tensile Modulus:
3600.0 - 3600.0 MPa
Zeniva® ZA-500 PEEK is a high-performance specialty polymer known for its remarkable strength, advanced stiffness, and exceptional toughness. Specifically designed for structural, load-bearing implantable medical devices, this bio-stable plastic offers excellent fatigue and creep resistance, ensuring durability under continuous strain and repeated loading. In comparison to metals, it presents advantages such as reduced stress shielding, absence of heavy metal allergies or ion erosion, and radiolucent properties for interference-free X-ray and CT scanning procedures.
Mitsubishi Chemical Group Corporation
Nylatron® GS PA66
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Rods, Tube, Plates
Features:
Excellent Toughness, Low Thermal Expansion, Good Electrical Properties, Good Mechanical Properties, High Strength, High Rigidity
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3600.0 - 3600.0 MPa
Nylatron® GS PA66 is a premium grade of Polyamide PA66, reinforced with Molybdenum Disulphide (MoS2) to enhance its mechanical properties. This unique combination of materials offers outstanding strength, rigidity, and a lower coefficient of linear thermal expansion than other nylon products.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding propertiesExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Maintains fits and clearances, reducing the likelihood of seizing as bearingsEnhanced bearing and wear properties due to MoS2Excellent performance in high-precision applicationsApplications:Ideal for use in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats, and seals in construction and heavy equipment industries.Can also be used in other high wear and load-bearing applications.Nylatron® GS PA66 is a superior choice for applications that require high strength, rigidity and wear resistance, making it a perfect solution for construction and heavy equipment industries.
Mitsubishi Chemical Group Corporation
Ertacetal® C POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Plates, Rods
Features:
Good Sliding Properties, High Hardness, Exceptional Resilience, General Purpose, Food Contact Acceptable, Creep Resistant, Excellent Stiffness, Low Moisture Absorption, Wear Resistant, Excellent Mechanical Strength, Excellent Dielectric Properties, Non-porous, Low Water Absorption, Electrically Insulating, Good Cost-Performance Ratio, Good Machinability, Dimensional Stability
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
3000.0 - 3000.0 MPa
Ertacetal® C POM-C / Acetron® GP Polyoxymethylene POM-C is a general purpose, copolymer acetal grade that is known for its porosity-free nature and low moisture absorption. These POM-C shapes also offer excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments.Features:Porosity-free materialLow moisture absorptionExcellent machinabilityBenefits:Suitable for use in food contact and medical applicationsMeets FDA, NSF, Canada AG, and SSI Standard compliance requirementsCan be used in a variety of environmentsApplications:Food processing and packaging equipmentMedical and diagnostic equipmentBearings and bushingsGears and electrical componentsValves and fluid handling components
Show
36
of 1,837 results
Go to page
1
2
3
4
5
6
7
8
9
10