Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Parts, Shapes & Films
Products in Parts, Shapes & Films
1,838 Products found in Parts, Shapes & Films
Filters
Suppliers
Applications
Physical Form
Polymer Name
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Mitsubishi Chemical Group Corporation
Semitron® ESd 410C PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
ESD Protection, High Tolerance, Static-Dissipative, Odorless, Low Water Absorption, Low Thermal Expansion, Dimensional Stability
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
5850.0 - 5850.0 MPa
Color:
Black
Semitron® ESd 410C PEI Polyetherimide electro static dissipative shapes are the perfect solution for semiconductor and electronics handling environments. These shapes offer exceptional dimensional stability and can withstand temperatures up to 410º F without degradation. The unique properties of Semitron® ESd 410C PEI make it ideal for a wide range of applications, including handling tray, circuit board, hard disk drive, and sensitive processing equipment applications.Features:Surface resistivity of 104 - 106 ohms/sq.Thermal performance to 210 °C (410 °F)Low stress for tight tolerance machiningHigh strength and stiffnessBenefits:Excellent dimensional stabilityResistant to high temperaturesLow stress for tighter tolerances during machiningReduced coefficient of linear thermal expansionMinimal water absorptionApplications:Handling Trays: Trays manufactured from Semitron® ESd 410C dissipate static charges reliably and are dimensionally stable. (Prior materials: PPS, PEEK, Vespel® PI)Circuit Boards: Semitron ESd 410C is ideal for use in circuit boards as it offers excellent dimensional stability and can withstand high temperatures without degradation.Hard Disk Drives: Semitron ESd 410C is an ideal material for use in hard disk drives due to its high strength, low stress properties and exceptional dimensional stability.Sensitive Processing Equipment: Semitron ESd 410C offers low stress properties, minimal water absorption and high strength making it an ideal choice for use in sensitive processing equipment.
Mitsubishi Chemical Group Corporation
Nylatron® SLG PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Plates, Rods
Features:
High Rigidity, Food Contact Acceptable, Lubricated, Heat Stabilized, Good Mechanical Properties, Low Coefficient of Friction, Wear Resistant, High Strength, Excellent Mechanical Strength, Self Lubricating, Excellent Toughness, Good Electrical Properties, Good Sliding Properties, Service Life Extension
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Nylatron® SLG Polyamide PA6 oil-filled shapes are the perfect solution for industrial applications that require low coefficient of friction, high mechanical strength and rigidity, and outstanding wear resistance. Developed specifically for non-lubricated, highly loaded, and slowly moving parts, these shapes offer a number of benefits over conventional cast nylon grades.Features:Broadest size range availabilityExcellent wear resistanceGood mechanical and electrical propertiesIdeal balance of strength and toughnessInternally lubricated and heat stabilizedBenefits:Low coefficient of friction and sliding propertiesHigh mechanical strength and rigidityOutstanding wear resistanceLonger service life and lower maintenance costs compared to conventional cast nylon gradesApplications:Ideal for use in industrial environmentsSuitable for non-lubricated, highly loaded, and slowly moving parts such as gears, bearings, bushings, and wear pads.
Mitsubishi Chemical Group Corporation
Nylatron® 66 SA FR PA66
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Rods, Plates
Features:
Flame Retardant, High Limiting Pressure Velocity, Low Temperature Impact Resistance, Low Moisture Absorption
Density:
1160.0 - 1160.0 kg/m³
Tensile Modulus:
3900.0 - 3900.0 MPa
Nylatron® SA Flame Retardant (FR) Polyamide PA66 shapes were specifically developed to meet the requirements of the plastic flammability test, as outlined in UL 94 and EN 45545-2 regulations. This grade of Nylatron® is designed for applications within the transportation and railway markets, and is ideal for use in cable holders, clamps, channels, and connections/sockets.Features:Universally flame retardantFully compliant with REACHLow moisture absorptionAbsence of heavy metals and halogens – RoHS compliantBenefits:Meets V-0 criteria from a thickness of 1mmCompliant with the EN 45545-2 regulation, a standard specific to railway applicationsSuitable for use in transportation and railway marketsApplications:Cable holdersClampsChannelsConnections / socketsAdditional Note: Parts manufactured from Nylatron 66SA FR can be disposed according to WEEE.
Mitsubishi Chemical Group Corporation
Ketron® 1000 IM PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Tube, Sheets, Rods
Features:
Wear Resistant, Good Thermal Stability, High Tolerance, Ductile, Good Compressive Strength, Chemical Resistant
Tensile Modulus:
4134.0 - 4134.0 MPa
Ketron® 1000 Injection Molded (IM) Polyetheretherketone PEEK shapes are the perfect solution for applications that require excellent chemical, corrosion and wear resistance across a wide range of operating temperatures. These advanced engineering plastics are ideal for use in the oil and gas industry, where they are often specified for back-up seal rings and v-seals. Key features: Very high maximum allowable service temperature in air (250 °C continuously, up to 310 °C for short periods of time) High mechanical strength, stiffness and creep resistance, even at elevated temperatures Excellent chemical and hydrolysis resistance Excellent wear and frictional behavior Very good dimensional stability Excellent resistance to high energy radiation (gamma- and X-rays) Inherent low flammability and very low levels of smoke evolution during combustion Benefits: Can withstand harsh environments and high temperatures Exceptional toughness and impact strength Sterilizable by all conventional sterilization methods Complies with EU and US regulations for food contact Available in "Food Grade" natural and black color options Applications: Back-up seal rings and v-seals in the oil and gas industry Bearings, bushings and gears in food processing equipment High temperature seals, gaskets and washers in chemical processing equipment Medical device components and implants Aerospace and automotive components
Mitsubishi Chemical Group Corporation
Ertalyte® PET - P
Polymer Name:
Polyethylene Terephthalate (PET)
Physical Form:
Tube, Plates, Rods
Features:
Food Contact Acceptable, Excellent Rigidity, Low Moisture Absorption, Low Coefficient of Friction, Wear Resistant, High Strength, Acid Resistant, High Tolerance, High Loading Absorption Capability, Odorless, Dimensional Stability, Semi Crystalline, Chemical Resistant, Abrasion Resistant
Density:
1390.0 - 1390.0 kg/m³
Tensile Modulus:
3500.0 - 3500.0 MPa
Color:
White, Black
Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.
Mitsubishi Chemical Group Corporation
Ertalon® 6 XAU+ PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Rods, Tube, Plates
Features:
Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability, High Degree of Crystallinity, High Density, X-Ray Shielding, Heat Aging Resistant, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, Excellent Stiffness, High Temperature Application, Heat Stabilized, Wear Resistant, Excellent Mechanical Strength, Improved Wear
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3500.0 - 3500.0 MPa
Ertalon® 6 XAU+ Polyamide PA6 is a polyamide PA6 material that is heat-stabilized and boasts a dense and highly crystalline structure. This material offers superior heat aging performance in air, making it a reliable choice for bearings and other mechanical parts that are subject to wear and that operate at high temperatures for extended periods of time.Features:Heat-stabilizedHighly dense, crystalline structureSuperior heat aging performance in airBenefits:Reliable wear resistance and performance at service temperatures over 60°C (140°F)Ideal for use in bearings and other mechanical parts that are subject to wear and that operate at high temperatures for extended periods of timeApplications:Bearings and other mechanical parts in high temperature environmentsIndustrial machinery and equipmentAutomotive and transportation industriesOther applications where heat and wear resistance are critical factors.
Mitsubishi Chemical Group Corporation
Zeniva® ZA-500 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Parts & Shapes, Plates, Rods
Features:
High Fatigue Resistance, X-Ray Transparent, Creep Resistant, Low Stress Shielding, Excellent Stiffness, High Loading Capacity, High Strength, Excellent Toughness, High Performance, Dimensional Stability, High Strain Capability
Density:
1290.0 - 1290.0 kg/m³
Tensile Modulus:
3600.0 - 3600.0 MPa
Zeniva® ZA-500 PEEK is a high-performance specialty polymer known for its remarkable strength, advanced stiffness, and exceptional toughness. Specifically designed for structural, load-bearing implantable medical devices, this bio-stable plastic offers excellent fatigue and creep resistance, ensuring durability under continuous strain and repeated loading. In comparison to metals, it presents advantages such as reduced stress shielding, absence of heavy metal allergies or ion erosion, and radiolucent properties for interference-free X-ray and CT scanning procedures.
Mitsubishi Chemical Group Corporation
Duratron® T4503 PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Tube, Plates, Rods
Features:
High Strength, High Tolerance, Creep Resistant, Odorless, Low Thermal Expansion, Thermally Insulating, Dimensional Stability
Density:
1400.0 - 1400.0 kg/m³
Tensile Modulus:
3450.0 - 3450.0 MPa
Duratron® T4503 PAI Polyamide-imide is a compression molded material that offers exceptional electrical insulation properties and excellent dimensional stability. This grade is often selected for extreme applications where large geometries are required, such as dies or thermal insulators. It has a similar composition to Duratron® T4203 PAI and is known for its high compressive strength, elongation, and impact resistance.Features:Outstanding electrical insulation propertiesExcellent dimensional stabilityHigh compressive strength and elongationImpact resistanceBenefits:Suitable for extreme applications such as dies and thermal insulatorsCan be used for large geometriesCan be used for electrical connectors and insulatorsApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearHigh Temperature Electrical ConnectorsBearing CagesCan Mandrel
Mitsubishi Chemical Group Corporation
Acetron® H POM-H
Polymer Name:
Polyacetal Homopolymer (POM)
Physical Form:
Plates, Rods
Features:
High Hardness, Creep Resistant, Excellent Stiffness, Low Thermal Expansion, Low Moisture Absorption, Wear Resistant, High Strength, Excellent Mechanical Strength, Improved Wear, Good Machinability
Density:
1430.0 - 1430.0 kg/m³
Tensile Modulus:
3700.0 - 3700.0 MPa
Acetron® POM-H / Ertacetal® H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, and hardness, making it the ideal choice for a wide range of demanding applications. Its superior creep resistance and low thermal expansion rate make it stand out from copolymer acetal grades, making it the go-to material for small diameter, thin-walled bushings, bearings, gears, electrical components, medical and diagnostic equipment, valves, and fluid handling components.Features:Superior mechanical strength, stiffness, and hardnessExceptional creep resistanceLow thermal expansion rateHigh wear resistanceBenefits:Durable and long-lasting performanceEasy installation and removal with minimal distortionHigh resistance to chemical wearHigh impact strength, even at low temperaturesExcellent dimensional stabilityApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components
SABIC's Specialties Business
ELCRES™ Dielectric Film HTV150A
Physical Form:
Film
Features:
Self Healing, Unreinforced, Metallizable, High Electric Breakdown Strength, Very Good Heat Resistance, Excellent Dielectric Properties, Good Adhesion
Color:
Natural
ELCRES™ Dielectric Film HTV150A by SABIC is designed to meet high-temperature demands for professional DC-Link power capacitors, catering to evolving high-voltage industry needs. With stability across temperatures (-40°C to +150°C) and frequencies (up to 100 kHz), ELCRES™ HTV150A film offers consistent properties. This includes sustained capacitance, robust insulation resistance, a steady dielectric constant (Dk), and a minimal dissipation factor (Df).
THAI WAH
ROSECO® Mulch Film SM1
Tensile Modulus:
45.0 - 45.0 MPa
ROSECO® Mulch Film SM1 is a biocompostable black mulch film with high strength and mechanical performance. This layer of black mulch stops light from penetrating, encourages photosynthesis, keeps the soil moist, inhibits weed growth, boosts yield, and saves harvesting expenses.
SABIC's Specialties Business
ULTEM™ Dielectric Film UTF120
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Film
Features:
Temperature Resistance, Flame Retardant, Unreinforced, Dimensional Stability, Design Flexibility, High Electric Breakdown Strength, Ease of Handling, Flame Resistant, Excellent Dielectric Properties
Density:
1290.0 - 1290.0 kg/m³
SABIC's Specialties Business ULTEM™ Dielectric Film UTF120 provides solutions for small to medium-sized, professional-grade capacitors, up to 10 microfarads in capacitance, to meet challenging industry requirements. The film exhibits stable properties across a range of temperatures (-40°C to +150 °C) and frequencies, including stable capacitance, good insulation resistance, a stable dielectric constant (Dk), and a low dissipation factor (Df). ULTEM™ Dielectric Film UTF120 has been validated by customers for use with both film-foil and metalized electrodes, including flat aluminum, heavy edge/light body, and fused/patterned electrode designs. It also offers excellent handling through metallization, winding, and capacitor squashing/flattening. Capacitors using this film are capable of passing industry-standard 260°C reflow soldering processes. It is available in 4, 5, 7, and 10-micron gauges and sold in 620mm x 5000m size rolls.
Dar-Tech Inc.
CDF Foil Material #ROLL 48X 200-05-09
Polymer Name:
Polypropylene/Foil/Polyethylene Film
Physical Form:
Film
Features:
Good Moisture Resistance, Oxygen Barrier, Food Contact Acceptable
CDF Foil Material #ROLL 48X 200-05-09 is a specialty foil material used for applications where oxygen and moisture vapor protection are important. It can be used to protect objects from dust, grease, or other contaminates. This material conforms to FDA regulations, Part 177.1520 CFR, for direct food contact.
Dar-Tech Inc.
CDF Foil Material #ROLL 24X 200-05-09
Polymer Name:
Polypropylene/Foil/Polyethylene Film
Physical Form:
Film
Features:
Good Moisture Resistance, Oxygen Barrier, Food Contact Acceptable
CDF Foil Material #ROLL 24X 200-05-09 is a specialty foil material used for applications where oxygen and moisture vapor protection are important. It can be used to protect objects from dust, grease, or other contaminates. This material conforms to FDA regulations, Part 177.1520 CFR, for direct food contact.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50MW
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50HK(KN)
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50HK(KN) is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 40N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 40N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 25MW
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 250NJ
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 250NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 25N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 100N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 100N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 21GS
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 21GS is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50LM
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50LM is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 200NJ
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 200NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 12N
Polymer Name:
Ethylene Tetrafluoroethylene Copolymer (ETFE)
Physical Form:
Film
Features:
High Durability, Non Stick, High Performance, UV Resistant, Good Moldability, High Dielectric Strength, Flexible, Excellent Transparency Properties, Excellent Flexibility, Good Mold Release, Excellent Anti-Fouling Properties, Low Dielectric Constant, Outdoor Durability, Good UV Resistance, Good Electrical Properties, Corona Treated, Very Good Heat Resistance, High Light Transmission, Good Weather Stability, Chemical Resistant, Wide Temperature Operating Range, Good Mechanical Properties
Density:
1750.0 - 1750.0 kg/m³
Color:
Transparent
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 12N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
Norplex-Micarta
Norplex-Micarta NP843
Polymer Name:
Phenolic Compound
Physical Form:
Sheets
Density:
1400.0 - 1400.0 kg/m³
Features:
Electrically Insulating, Semi Conductive, Excellent Mechanical Strength, Static-Dissipative
Paper reinforced phenolic grade with controlled conductivity. NP843 has mechanical strength similar to NP611. It has conductive surfaces only.
Norplex-Micarta
Norplex-Micarta NP511
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Fabric, Sheets
Density:
1800.0 - 1800.0 kg/m³
Features:
Electrically Insulating, Good Electrical Properties, UL Listed, High Temperature Strength, Good Impact Strength, Good Flexural Modulus, Excellent Mechanical Strength, Good Bonding Strength
NP511 consists of a woven glass fabric combined with high temperature epoxy resin system. NP511 has excellent mechanical strength and electrical properties from cryogenic to elevated temperatures. Continuous operating temperature is 175°C. This material meets NEMA G-11, MIL-I-24768/3, Type GEB and IEC-60893-3-2 EP GC 203.
Norplex-Micarta
Norplex-Micarta NP342
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Fabric, Sheets
Density:
1350.0 - 1350.0 kg/m³
Features:
Good Machinability, General Purpose, Non Abrasive, Reduced Noise, Cost Effective, Wear Resistant
Fine weave canvas phenolic material with fabric construction weight intermediate to NP310 and NP320. NP342 is designed for better machining than grade NP310 and lower cost than NP320. NP342 meets or exceeds the requirements of MIL-I-24768/16 and IEC-60893-4-PF CC 201.
Norplex-Micarta
Norplex-Micarta NP320E
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1340.0 - 1340.0 kg/m³
Features:
Reduced Noise, Wear Resistant, Good Moisture Resistance, Good Electrical Properties, Good Machinability
Similar to NP320 with improved moisture resistance. It is suitable for electrical applications in moderate humidity conditions. NP320E meets or exceeds the requirements of MIL-I-24768/13 and ASTM F2953-12 Type FB. Certification to IEC standard is pending.
Norplex-Micarta
Norplex-Micarta P95
Polymer Name:
Thermoset Polyimide (PI), Polyimide (PI)
Reinforcement Material:
Glass Fibers
Physical Form:
Fabric, Sheets
Density:
1840.0 - 1840.0 kg/m³
Features:
Low Thermal Expansion, High Temperature Strength, Excellent Mechanical Strength, Good Compressive Strength, Chemical Resistant, Enhanced Physical Properties, Low Moisture Absorption, Consistent High Quality, Heat Resistance
Woven glass fabric combined with a high temperature polyimide resin system engineered to maintain excellent physical properties at 240°C. P95 has a low coefficient of thermal expansion, high mechanical strength and excellent heat resistance. Certification to IEC standard is pending.
Norplex-Micarta
Norplex-Micarta NP320
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1340.0 - 1340.0 kg/m³
Features:
Non Abrasive, Reduced Noise, Wear Resistant, Good Machinability
Fine weave (less than 4 ounce/square yard) cotton fabric commonly called linen, combined with phenolic resin to provide better machining than NP310. NP320 should be used for smaller and more intricate shapes than NP310, when a finer surface finish is required. NP320 meets or exceeds the requirements of MIL-I-24768/15 and IEC-60893-4-PF CC 203.
Norplex-Micarta
Norplex-Micarta NP310
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1370.0 - 1370.0 kg/m³
Features:
Non Abrasive, Good Impact Strength, Good Mechanical Properties, Wear Resistant, UL Listed, Good Machinability
NP310 is a canvas machining grade for structural and mechanical applications. It has better impact strength than phenolic paper grades. NP310 meets or exceeds the requirements of MIL-I-24768/16 and IEC-60893-4-PF CC 201.
Norplex-Micarta
Norplex-Micarta NP515LS
Polymer Name:
Phenolic Compound
Reinforcement Material:
Glass Fibers
Physical Form:
Fabric, Sheets
Density:
1890.0 - 1890.0 kg/m³
Features:
High Performance, High Temperature Strength, Thermally Insulating, Good Shrinkage Resistance
NP515LS is a woven glass fabric combined with a high temperature phenolic resin. It is engineered to provide superior shrink characteristics at elevated temperatures, making it an ideal material for insulating gaskets. Having been tested and certified as a NEMA G-3 material, NP515LS also meets or exceeds the requirements of IEC 60893-3-4 PF GC 201.
Norplex-Micarta
Norplex-Micarta NP322
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1390.0 - 1390.0 kg/m³
Features:
Excellent Lubricity, Excellent Mechanical Strength, Reduced Noise, Cost Effective, Wear Resistant, Non-conductive, Good Machinability
NP322 is composed of a linen substrate combined with a phenolic resin system which contains molybdenum disulfide for reduced wear and increased lubrication. Provides the same lubricity as NP313, but has better machining qualities. The mechanical strength is similar to, but slightly less than NP320. NP322 is used in applications where reduced wear is needed in non-conductive applications.
Norplex-Micarta
Norplex-Micarta NP500CR
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets, Fabric
Density:
1800.0 - 1800.0 kg/m³
Features:
Enhanced Physical Properties, Good Electrical Properties, Thermally Conductive
NP500CR (commonly referred to as G10 CR) consists of a glass fabric with an epoxy resin system resulting in excellent electrical characteristics and superior physical properties at cryogenic temperatures (-270 °C to 135 °C operating temperature range). Previously designated as Westinghouse/International Paper Micarta Cryogenic Grade 56 G12, it has low thermal conductivity and utilizes chemistry specifically designed for cryogenic applications.
Show
36
of 1,838 results
Go to page
1
2
3
4
5
6
7
8
9
10