Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Products in Thermoset Resins
922 Products found in Thermoset Resins
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
ADEKA Corporation
ADEKA™ EP-4000S
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
ADEKA™ EP-4000S, identified by the polymer name epoxy resins and compounds, is characterized by its low viscosity. Designed for plastics and elastomers processing methods, particularly casting, ADEKA™ EP-4000S ensures ease of application and efficient material flow in various industrial processes.
ADEKA Corporation
ADEKA™ EP-4080E
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Electrical/Electronic Applications
ADEKA™ EP-4080E, a distinguished epoxy resins and compounds variant, is tailored for specific plastics and elastomer processing methods, especially casting. With a prime focus on applications in the electrical and electronic domains, ADEKA™ EP-4080E ensures optimal material performance in these specialized settings. As a reliable choice for casting processes, this polymer addresses the unique requirements of electrical and electronic applications, making it an ideal solution for industries demanding precision and reliability.
Leepoxy Plastics
Leecast 16-46 A
Polymer Name:
Epoxy Resins & Compounds
Volume Resistivity:
1000000000000.0 - 1000000000000.0 Ohm-m
Leecast 16-46 A is a two-part epoxy compound designed for the encapsulation of electrical and electronic components. The advantages of LEECAST 16-46 include flame retardancy, good thermal shock resistance, good electrical properties, non-abrasive filler, easy 1 to 1 mix ratio and room temperature cure.
SACO AEI Polymers
PEXIDAN® HF SX622
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1430.0 - 1430.0 kg/m³
Tensile Strength:
10.5 - 10.5 MPa
PEXIDAN® HF SX622 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U/1 in the ratio 95:5 or CM540U in the ratio 97:3. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX622 has been designed to meet the requirements of IEC 60092-360 SHF2 sheathing.
Resin Systems
Resin Systems RS-2277
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
55.12 - 55.12 MPa
RS-2277 is a patented, castable, lead free insulating grade filled epoxy resin specifically designed for high voltage insulator applications requiring X-Ray shielding. This material provides good electrical grade insulation properties, high mechanical properties, and superior arc resistance to any lead oxide filled epoxy. This material has equal x-ray shielding to a 25% lead oxide filled epoxy. This material is non-flammable and meets UL94V-0 requirements.
ADEKA Corporation
ADEKA™ ED-506
Polymer Name:
Epoxy Resins & Compounds
ADEKA™ ED-506, distinguished by the polymer name epoxy resins and compounds, holds a key position as a specialized resin in the domain of plastics and elastomer functions. With a commitment to advanced plastic technologies, this product seamlessly integrates into formulations, ensuring a versatile and high-performance contribution to the ever-evolving landscape of the plastics industry. ADEKA™ ED-506 embodies excellence, reflecting a dedication to meeting the diverse demands within the realm of plastics and elastomer applications.
SACO AEI Polymers
PEXIDAN® HF SX559
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires, Nuclear Power Applications
Density:
1490.0 - 1490.0 kg/m³
Tensile Strength:
14.0 - 14.0 MPa
PEXIDAN® HF SX559 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U in a ratio of 97:3 to 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX559 has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1, EN 50525-3-41 or other insulation or sheathing applications where high fire retardancy is required. Good CPR performance.
ADEKA Corporation
ADEKA™ EP-49-10N
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
ADEKA™ EP-49-10N, an epoxy resins and compounds polymer aligned with advanced plastic technologies, excels in plastics processing methods, especially casting. Noteworthy for its corrosion-resistant properties and excellent adhesion, ADEKA™ EP-49-10N is a top-tier choice for applications demanding superior performance and durability.
ADEKA Corporation
ADEKA™ ED-503
Polymer Name:
Epoxy Resins & Compounds
ADEKA™ ED-503 is distinguished by the polymer name epoxy resins and compounds, is a resin designed for plastics and elastomer functions. Rooted in advanced plastic technologies, it aligns with the evolving needs of the industry, contributing as a crucial component in formulations within the realm of plastics.
SACO AEI Polymers
PEXIDAN® SX408
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Low Voltage Insulation, Cables, Wires
Density:
925.0 - 925.0 kg/m³
PEXIDAN® SX408 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. If high thermal aging is required, than CM493 should be used instead. Crosslinking is obtained by exposure to moist or hot water immersion only.
BCC Products
BCC Resins™ BC 8010-2
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Modeling Material, Prototyping
BC8010-2 Metal-Kast/Slo, the result of extensive research and development is an aluminum filled, metal-like, medium setting urethane reproduction plastic. A slower version of the BC8010 Metal-Kast which allows the user longer working time for pouring larger castings or for filling closed mold cavities. BC8010-2 is ideal for the construction of low temperature vacuum form tools, prototypes, models, display parts, patterns, keller aids and bulk back fill.
BIP (Oldbury) Ltd.
Beetafin™ BF2797
Polymer Name:
Polyurethane (MDI-based)
Features:
Consistent High Quality
Beetafin™ BF2797 is a water based Polyurethane emulsion having excellent compatibility with most common water-based systems. The product is suitable for application to a variety of substrates where high quality and longevity are prime requirements.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh LH 28 1TM
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Laminating
End Uses:
Molds/Dies/Tools, Mold Making, Tooling, Power/Other Tools
Flexural Strength:
85.0 - 105.0 MPa
Ebalta LH 28-1 / TM is a two components epoxy laminating resin, precuring at room temperature and, depending on postcuring, can be used till 175°C. Since this laminating resin system contains no fillers, it has got good wetting properties and makes a high glass fabric content possible. This leads to a low coefficient of thermal expansion and high strength. Together with aluminum granules, ebalta LH 28-1 is suitable for back filling of heat resistant molds and molding tools. At room temperature the curing takes 7 days and the material can only be used for applications till 60°C.
BCC Products
BCC Resins™ BC 5010
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Lamination
End Uses:
Laminates
BC 5010 is a high quality, low viscosity room temperature curing laminating resin. A Safety System for the production of a variety if dimensionally stable fiberglass tools. BC 5010 features low odor and rapid "wet-out" with no vertical drain off. An excellent general purpose laminating resin to meet the tooling requirements for automotive, aircraft, and foundry.
Poliya Composites and Polymers
Polipol 339-TA-LSE-H40
Polymer Name:
Thermoset Polyester
Processing Methods:
Spray Lay-Up, Hand Lay-Up
End Uses:
Automotive Interior Parts, Medical Devices, Electrical Components, Marine Applications, Industrial Parts, Automotive Applications, Enclosure, Automotive Exterior Parts
Cure Method:
Chemical Cure
Polipol 339-TA-LSE-H40 is a Hand lay-up / Spray-up medium reactivity thixotropic preaccelarated LSE polyster.
BCC Products
BCC Resins™ MB1300
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Foam Processing, Machining
End Uses:
Molds/Dies/Tools, Modeling Material, Prototyping, Agricultural Applications, Automotive Applications, Aerospace Applications
MB 1300 is a Mahogany colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1300 is medium low density foam of approximately 30lbs/ft³ board. Easily cut using CNC machining equipment the MB 1300 is perfectly suited for visual master models, architectural design models as well as design verification and prototype tools.
Kemrock Industries and Exports
Kemrock Industries and Exports KPR 6610
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Density:
1110.0 - 1110.0 kg/m³
KPR 6610 by Kemrock Industries and Exports is an isophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6610 is used in structural applications.
Automotive Compounding Industry (Perplastic Group)
Automotive Compounding Industry (Perplastic Group) POLY EV T3
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables
Bonyan Kala Chemie
BUP 640
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Orthophthalics, Unsaturated Polyester (UPE)
Cure Method:
Heat Cure
Density:
1170.0 - 1170.0 kg/m³
BUP 640 is an un-promoted orthophthalic based unsaturated polyester resin with very low color, high solid and viscosity, good flexibility, transparency and mechanical properties for ambient temperature cure with MEK peroxide.
Resin-SA Pty Ltd
Resin-SA Pty Ltd RES CR002-U-N-A
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Orthophthalics, Unsaturated Polyester (UPE)
Processing Methods:
Casting
Resin-SA Pty Ltd RES CR002-U-N-A appears clear and it is fast curing casting resin.
Hapco Inc.
Di-Pak™ E-4665-3
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4600 SERIESFlexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Available in flame retardant (FR), 3 minute (-3) gel time, and in black or unpigmented.
KarpatSmoly
KarpatSmoly UF Resin Grade B
Polymer Name:
Urea Formaldehyde Resin (UF)
KarpatSmoly UF Resin Grade B is an aqueous suspension, non-flammable, non-explosive. UF resin of lowered toxicity withfree formaldehyde content not above 0.1%.
Hapco Inc.
Ultralloy™ 207
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting, Vacuum Casting
End Uses:
Prototyping, Agricultural Applications, Housings, Toys
The ULTRALLOY series of liquid molding compounds are tough, fast cycling, low cost, and easy to use. ULTRALLOY is designed to be used with Liquid Molding, open casting, pressure casting, or vacuum casting processes. ULTRALLOY can be used with silicone, epoxy, urethane, polyester, or aluminum molds. Low cost molds and fast cycle times are two key attributes of ULTRALLOY.ULTRALLOY is available in several series. Each series has different products with different physical properties. Properties such as elongation, tensile strength, and modulus of elasticity can be selected to mold parts with the correct physical characteristics. Choose the ULTRALLOY material with the exact properties you need, or that are required to meet specifications.ULTRALLOY is available in opaque white, clear/transparent, and in fire retardant (UL 94V-0) versions. Custom coloring can be achieved by pigmenting ULTRALLOY with Hapco's easy to mix color dispersions. Both opaque and translucent color dispersions are available.ULTRALLOY can be molded in inexpensive molds, reducing total part cost, for short run programs.ULTRALLOY is made for prototypes and short runs of plastic parts. ULTRALLOY fills the need for low cost, high performance parts, in volumes less than 10,000 parts per year.ULTRALLOY 200 SERIESA series of general purpose Liquid Molding Compounds that do not change color and remain clear/ light yellow when cured. Ultralloy 200 Series are ideal for in mold coloring of parts. They can be easily pigmented and the color remains the same in the cured or liquid state. Tensile strengths from 10,300 psi to 11,800 psi are available.
Automotive Compounding Industry (Perplastic Group)
Automotive Compounding Industry (Perplastic Group) XLPE T3 - 2
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables
Kemrock Industries and Exports
Kemrock Industries and Exports KPR 6300C
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Density:
1130.0 - 1130.0 kg/m³
KPR 6300C by Kemrock Industries and Exports is an orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6300C is used in buttons.
RECKLI
RECKLI Epoxy Compound 51/30
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Industrial Castings
RECKLI Epoxy Compound 51/30 is a ready-to-use, easily flexible, two-component casting resin for the production of models, reliefs, ornaments, frames, decorative parts or usable as a casting mass in construction. Its color is creamy-white.
Poliya Composites and Polymers
Polipol 3401-TA-H20
Polymer Name:
Thermoset Polyester
Processing Methods:
Spray Lay-Up, Hand Lay-Up
End Uses:
Fenders, Filters, Industrial Parts, Automotive Bumpers
Cure Method:
Chemical Cure
Polipol 3401-TA-H20 is a Hand lay-up / Spray-up thixotropic preaccelarated polyster.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh MG 807 FR Comp. A+B
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Modeling Material
Density:
1280.0 - 1320.0 kg/m³
Tensile Strength:
2.0 - 8.0 MPa
This product is a polyurethane system. The processing is preferably made in customary vacuum pouring plant. Manual processing possible. Mouldmaterial: we recommend silicone molds, for example Silastic® RTV 4234-T4O.
Fudow Company
Fudow Company F5650F
Polymer Name:
Phenol Formaldehyde (PF)
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
End Uses:
Automotive Components, Switches, Electrical/Electronic Applications, Automotive Interior Parts, Automotive Electronics, Automotive Applications
Fudow Company F5650Fis a glass fiber.
Kemrock Industries and Exports
Kemrock Industries and Exports KPR 6420
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Processing Methods:
Pultrusion
Density:
1120.0 - 1120.0 kg/m³
KPR 6420 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6420 is suitable for processing by pultrusion. Recommended for FRP composites.
BCC Products
BCC Resins™ BC 6004
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Coating
BC 6004 is a white thixotropic epoxy surface coat that had the ability to cure and bond to freshly poured wet plaster. This formulated resin compound can be applied with a brush or troweled to a thickness of 1/8" or less on vertical surfaces or over sharp radii without sag or fear of run-off. BC 6004 features moderate heat resistance and tracing hardness.Procedure for Plastic Faced Plaster Applications:BC 6004 should be applied over a properly mold-released surface so that positive removal of the surface coated plaster casting is assured. For best results, two coats approximately 1/16" thick should be used. The first coat should be brushed over the entire surface and then allowed to cure to a gelled or very tacky state. The second coat should be applied over the first. If hemp, glass or other fibrous plaster reinforcements are to be used, they should be placed in the freshly applied second coat immediately. Plaster can then be poured against the wet, second coat of BC 6004. To achieve good adhesion of the epoxy to the plaster, it is recommended that the plaster be poured immediately. The application of two coats of BC 6004 will eliminate surface porosity that sometimes occurs when fast setting, "hot" plaster compounds are cast over a single coat of epoxy.
Swancor
Swancor 2559
Polymer Name:
Epoxy Resins & Compounds
Chemical Family:
Epoxy & Epoxy Derivatives
SWANCOR 2559 is a high Tg hot-melt epoxy resin. The formula does not contain Diuron and volatile ingredients. It has the characteristics of light weight, excellent mechanical strength, heat resistance and corrosion resistance.
Hapco Inc.
Ultraclear™ 480N-60
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Prototyping
Ultraclear™ 480N-60 by Hapco Inc. is comprised of Polyurethane (unspecified). It is commonly used as Casting Resin for a variety of applications.
Smooth On
Smooth-Cast™ 310
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Jewelry, Modeling Material, Prototyping
Density:
1050.0 - 1050.0 kg/m³
Tensile Strength:
20.67 - 20.67 MPa
Smooth-Cast™ 310 is ultra-low viscosity casting resins that yield castings that are bright white and virtually bubble free. Vacuum degassing is not necessary. They offer the convenience of a 1A:1B by volume or 100A:90B by weight mix ratio. The differences between them are pot life and demold time.
Rampf Group
RAKU® TOOL EH-2945
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Industrial Castings, Prototyping, Mold Making, Tooling
RAKU® TOOL EH-2945 is a spreadable and sculptable tool that is used in E84 Class A. Substrate dependent, E-84 Class A required anywhere, Molded Themed Castings, Scenery, Sculptures and Design Models.
DUGALAK
DEPOL SH
Polymer Name:
Thermoset Polyester
Processing Methods:
Spray Lay-Up, Filament Winding, Hand Lay-Up
DEPOL SH is a middle reactive, self-extinguishing unsaturated HET-acid based polyester resin.
Show
36
of 922 results
Go to page
1
2
3
4
5
6
7
8
9
10