Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Applications & Uses
- Cure Method
Properties
- Appearance
- Black liquid, Off-white liquid
- Typical Properties
- Electrical Properties
- Handling Properties
Value | Units | Test Method / Conditions | |
Hardness | 75 | Shore D | — |
Viscosity (25ºC) (Part A) | 4500 | cps | — |
Density (PART A) | 11.7 | lbs./gal | — |
Viscosity (25ºC) (Part B) | 16000 | cps | — |
Density (PART B) | 12.25 | lbs./gal | — |
Tensile Strength | 7000 | psi | — |
Tensile Elongation | 12 | % | — |
Water Absorption (7 days at R.T) | 0.2 | % | — |
Value | Units | Test Method / Conditions | |
Volume Resistivity (25°C) | 1.0 x 10^14 | ohm-cm | — |
Dissipation Factor (100 Hz) (25°C) | 0.025 | — | — |
Dielectric Constant (100 Hz) (25°C) | 4.4 | — | — |
Dielectric Strength (25ºC) | 400 | volt/mil | — |
Value | Units | Test Method / Conditions | |
Mix Ratio, by weight (PART A) | 100 | — | — |
Mixed Color (PART A) | Black | — | — |
Pot Life (25ºC) (PART A) | 45 | minutes | — |
Gel Time (25ºC) (PART A) | 60 - 90 | minutes | — |
Cure Time, 25ºC (PART A) | 24 - 48 | hours | — |
Cure Time, 80ºC (PART A) | 1 - 2 | hours | — |
Mix Ratio, by weight (PART B) | 100 | — | — |
Mixed Color (PART B) | Black | — | — |
Pot Life (25ºC) (PART B) | 45 | minutes | — |
Gel Time (25ºC) (PART B) | 60 - 90 | minutes | — |
Cure Time, 25ºC (PART B) | 24 - 48 | hours | — |
Cure Time, 80ºC (PART B) | 1 - 2 | hours | — |
Storage & Handling
- Handling and Mixing
LEECAST 16-46 can be mixed de-aired, poured and cured at room temperature. Flexibility is built into the system and different resin to curative ratios can be used. The 1 to 1 mix ratio will provide excellent properties for many applications. More resin relevant to the curative (3 A to 2 B, by weight) will result in a harder, less flexible cured material. Measure out parts A and B and mix thoroughly, scraping the sides and bottom of the container. For void-free castings, de-air under vacuum and cast around components.
The gel time of LEECAST 16-46 depends on the temperature and mass of material. Large masses and/or elevated temperatures will shorten the gel time.
Cure can be accomplished at room temperature or with heat if faster cures are desired. Typical cure schedules for small masses are:25oC 24 – 48 hours 50oC 4 – 8 hours 80oC 1 – 2 hours 100oC 40 – 60 minutes - Shelf life
6 months