Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Products in Thermoset Resins
922 Products found in Thermoset Resins
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Hapco Inc.
Ultralloy™ 3310-28
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting, Vacuum Casting
End Uses:
Prototyping, Agricultural Applications, Housings, Toys
The ULTRALLOY series of liquid molding compounds are tough, fast cycling, low cost, and easy to use. ULTRALLOY is designed to be used with Liquid Molding, open casting, pressure casting, or vacuum casting processes. ULTRALLOY can be used with silicone, epoxy, urethane, polyester, or aluminum molds. Low cost molds and fast cycle times are two key attributes of ULTRALLOY.ULTRALLOY is available in several series. Each series has different products with different physical properties. Properties such as elongation, tensile strength, and modulus of elasticity can be selected to mold parts with the correct physical characteristics. Choose the ULTRALLOY material with the exact properties you need, or that are required to meet specifications.ULTRALLOY is available in opaque white, clear/transparent, and in fire retardant (UL 94V-0) versions. Custom coloring can be achieved by pigmenting ULTRALLOY with Hapco's easy to mix color dispersions. Both opaque and translucent color dispersions are available.ULTRALLOY can be molded in inexpensive molds, reducing total part cost, for short run programs.ULTRALLOY is made for prototypes and short runs of plastic parts. ULTRALLOY fills the need for low cost, high performance parts, in volumes less than 10,000 parts per year.ULTRALLOY 3300 SERIESA series of flame retardant, (UL 94V-0) high strength, systems with excellent physical properties. This series can be pressure or vacuum cast. Underwriter Labs Flame Retardant 94V-0 @ 2.5 mm thickness. This series is available in a 2, 4, 14, and 28 minute gel time.
Matrix Polymers
Revolve XL400
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Rotational Molding
End Uses:
Fuel Tanks, Industrial Tanks
Density:
945.0 - 945.0 kg/m³
Revolve XL400 is a rotational molding crosslinkable polyethylene grade which combines outstanding performance with all the benefits of a high MFI resin. This grade is especially suitable for demanding applications such as diesel tanks and IBCs due to its superb chemical resistance. It is advisable to consult the MSDS before use.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 965 70Comp. A+B
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Mold Making
Density:
1170.0 - 1230.0 kg/m³
Tensile Strength:
5.5 - 6.5 MPa
This product is a polyurethane system. No load on GM 965-70 before 24 hrs. curing at room temperature (23°C) If the product is cured at room temperature, no entire chemical and mechanical load before 7 days after curing. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product.
Smooth On
Smooth-Cast™ ONYX™ SLOW
Polymer Name:
Polyurethane (unspecified)
End Uses:
Semiconductor Applications, Prototyping, Encapsulant
Density:
1090.0 - 1090.0 kg/m³
Tensile Strength:
52.7774 - 52.7774 MPa
Smooth-Cast™ ONYX™ SLOW is a mercury-free urethane resin that cures at room temperature to a deep black, solid plastic. ONYX™ resins offer the convenience of a 1A:1B by volume mix ratio and have very low viscosities, so they are easy to mix and pour. ONYX™ resins have an ultimate Shore hardness of 80D and offer higher physical properties and higher heat resistance vs. other general purpose resins. ONYX™ resins are available in 2 speeds. ONYX™ FAST resin has a pot life of 2.5 minutes and a cure time of 10-15 minutes, while ONYX™ SLOW has a pot life of 5 minutes and a cure time of 90 minutes.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh AH 120TC 60
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Laminating
End Uses:
Textile Applications, Automotive Interior Parts, Aircraft Interiors, Aircraft Applications, Automotive Applications, Automotive Exterior Parts
Flexural Strength:
115.0 - 135.0 MPa
ebalta AH 120/TC 60 is a very thin liquid epoxy resin with high values of strength and dimensional stability. Due to its good impregnating and wetting properties it is suitable as laminating resin for high-strength components with fabrics of glass –or carbon fiber. ebalta AH 120/TC 60 is suitable for laminating of thin as well as thick laminates with large surface up to a thickness of 8 mm. A post-curing should be executed, if possible before demoulding.
Matrix Polymers
Revolve XL400 Black
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Rotational Molding
End Uses:
Fuel Tanks, Industrial Tanks
Density:
955.0 - 955.0 kg/m³
Revolve XL400 Black is a rotational molding crosslinkable polyethylene grade which combines outstanding performance with all the benefits of a high MFI resin. This grade is especially suitable for demanding applications such as diesel tanks and IBCs due to its superb chemical resistance. It is advisable to consult the MSDS before use.
MARTE SpA
Ares® P107
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Orthophthalics, Unsaturated Polyester (UPE)
Processing Methods:
Spray Lay-Up
Ares P107 is resin for reinforcing bathtubs and shower trays, excellent adhesion on PMMA, good wettability and compatibility with glass fibers. Low styrene content. Also ideal for spray up processing. Low emission version (LSE) available.
Rampf Group
RAKU® TOOL PF-3708
Polymer Name:
Polyurethane (unspecified)
End Uses:
Industrial Castings
RAKU® TOOL PF-3708 has the following properties: unfilled, very low viscosity, high fill rate capability, good cure, very high strength, and good temperature resistance.
BCC Products
BCC Resins™ HPX 691
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Modeling Material, Prototyping
BCC Resins HPX 691 is an Epoxy; Epoxide (Epoxy) product. It can be processed by casting and is available in North America. Typical application: Prototyping Applications.Characteristics include: Clarity Good Toughness Low Shrinkage Scratch Resistant
Hapco Inc.
Ultralloy™ 202
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting, Vacuum Casting
End Uses:
Prototyping, Agricultural Applications, Housings, Toys
The ULTRALLOY series of liquid molding compounds are tough, fast cycling, low cost, and easy to use. ULTRALLOY is designed to be used with Liquid Molding, open casting, pressure casting, or vacuum casting processes. ULTRALLOY can be used with silicone, epoxy, urethane, polyester, or aluminum molds. Low cost molds and fast cycle times are two key attributes of ULTRALLOY.ULTRALLOY is available in several series. Each series has different products with different physical properties. Properties such as elongation, tensile strength, and modulus of elasticity can be selected to mold parts with the correct physical characteristics. Choose the ULTRALLOY material with the exact properties you need, or that are required to meet specifications.ULTRALLOY is available in opaque white, clear/transparent, and in fire retardant (UL 94V-0) versions. Custom coloring can be achieved by pigmenting ULTRALLOY with Hapco's easy to mix color dispersions. Both opaque and translucent color dispersions are available.ULTRALLOY can be molded in inexpensive molds, reducing total part cost, for short run programs.ULTRALLOY is made for prototypes and short runs of plastic parts. ULTRALLOY fills the need for low cost, high performance parts, in volumes less than 10,000 parts per year.ULTRALLOY 200 SERIESA series of general purpose Liquid Molding Compounds that do not change color and remain clear/ light yellow when cured. Ultralloy 200 Series are ideal for in mold coloring of parts. They can be easily pigmented and the color remains the same in the cured or liquid state. Tensile strengths from 10,300 psi to 11,800 psi are available.
Crosslink Technology Inc.
Crosslink Technologies CLR1186
Applications:
Sports & Recreation
Product Families:
Epoxies, Thermoset Resins
Chemical Family:
Epoxy & Epoxy Derivatives
Polymer Name:
Epoxy Resins & Compounds
CLR1186 is a low viscosity two component epoxy system. The product cures at low temperatures down to 10c. The product is suitable for laminating, adhesive, and chemical resistant applications. The product has good hiding strength when applied in a thin film.
Fudow Company
Fudow Company F5626F
Polymer Name:
Phenol Formaldehyde (PF)
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
End Uses:
Automotive Components, Switches, Electrical/Electronic Applications, Automotive Interior Parts, Automotive Electronics, Automotive Applications
Fudow Company F5626F is a glass fiber.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 971 75Comp. A+B
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Tires, Mold Making, Tubing, Flexible Grips
Density:
1090.0 - 1130.0 kg/m³
This product is a polyurethane system. Mechanical data according to test pieces post-cured for 8 hrs. at 80°C. No heavy chemical and mechanical stress before 7 days after curing at room temperature (20-23°C).
Hapco Inc.
Di-Pak™ R-4545/17
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
RIGIDDI-PAK R-4545 SeriesA very low viscosity potting and encapsulating system with excellent flow and penetration into the most intricate electronic components, without voids or porosity. The R-4545 Series cure to a hard, shiny, high gloss, plastic finish that is free from "blushing" under all humidity conditions. The R-4545 Series is ideal for electrical applications where surface finish and appearance are critical.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh AH 120GL
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Laminating
End Uses:
Textile Applications, Automotive Interior Parts, Aircraft Interiors, Aircraft Applications, Automotive Applications, Automotive Exterior Parts
Flexural Strength:
100.0 - 120.0 MPa
ebalta 120/GL is a very low-viscous two-component epoxy resin with high strength values and fast curing. Due to its good soaking and wetting characteristics, this resin/hardener mixture is most suitable for solid parts with fabrics made of glass or carbon fibers. AH 120/GL is suitable as laminating resin for both large area- and thick laminates. Due to its almost odorless and skin-friendly GL hardener it is most suitable as laminating resin. With a mixing ratio of 100:40 you reach an about 15°C higher TG, slightly stiffer laminates as well as better impact resistance. The laminate thickness should not exceed 6-7 mm.
RECKLI
RECKLI Rapid Epoxy Type LS
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Thin Coatings
RECKLI Rapid Epoxy Type LS is a solvent-free, liquid-tight, stable two-component mortar, based on epoxy resin. It shows high compressive and flexural strength as well as adhesive strength on concrete. On exposure to direct sunlight or UV irradiation, it is gradually yellowing; however, without degradation of mechanical properties.
Fudow Company
Fudow Company F5802F
Polymer Name:
Phenol Formaldehyde (PF)
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
End Uses:
Automotive Components, Switches, Electrical/Electronic Applications, Automotive Interior Parts, Bobbins, Relay Bases, Automotive Electronics, Automotive Applications
Fudow Company F5802F is organic filler.
BCC Products
BCC Resins™ BC 8405
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
BC 8405 is an unfilled, low viscosity, quick setting two component urethane system. An easy to use 1 to 1 mix ratio (Part A/Part B), BC 8405 offers the user a rationable working time of 15 minutes with parts demoldable in as little as 2 hours. When properly cured, BC 8405 will exhibit high impact strength and yield thermoplastic-like parts. Some outstanding features include the following: mercury free, moderate heat resistance, 1 to 1 mix ratio, turn white upon cure, longer mold life, high impact strength, no objectionable odor, excellent finishing properties, thermoplastic appearance, more parts per day.
BCC Products
BCC Resins™ MB1200
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Foam Processing, Machining
End Uses:
Molds/Dies/Tools, Modeling Material, Prototyping, Agricultural Applications, Automotive Applications, Aerospace Applications
MB 1200 is an Apricot and/or Pink colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1200 is low density foam of approximately 20lbs/ft³ board. Easily cut using CNC machining equipment or by hand the MB 1200 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.
BCC Products
BCC Resins™ BC 7136
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools
BC 7136 is a gray, low toxicity, aluminum filled, epoxy casting resin. This heat resistant system may be used at room temperature without post-curing. May be cast to a thickness of ¾ inch in non-conductive molds. For use above 150°F a post-cure is required. Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2 hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours at 300°F. BC 7136 can afford consistent use to 300°F if required. This product was engineered to replace VCHD and MDA systems while retaining excellent heat resistance and low viscosity. Typical uses include constructing vacuum form tools, Injection and compression molds, RTM and RIM molds, and matched dies.
Silon
TABOCAB® SXI 007
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
Density:
946.0 - 946.0 kg/m³
Tensile Strength:
21.0 - 21.0 MPa
The HFFR-XL compound product range is a group of thermosetting, halogen-free flame retardant, low-smoke and non-toxic compounds based on polyolefins and mineral fillers, which can be crosslinked using heat or moisture. A catalyst masterbatch is added during the final extrusion together with the main compound (SIOPLAS method). These products are suitable for producing cross-linked insulation or sheathing.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh MG 804Comp. A+B
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Modeling Material
Density:
1080.0 - 1120.0 kg/m³
Tensile Strength:
50.0 - 60.0 MPa
This product is a polyurethane system. The processing is preferably made in customary vacuum pouring plant. Manual processing possible. Maximum wall thicknesses of the parts: from 5 – 10 mm.
Kemrock Industries and Exports
Kemrock Industries and Exports KPR 6600
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Density:
1110.0 - 1110.0 kg/m³
KPR 6600 by Kemrock Industries and Exports is an isophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6600 is used in laminations and marine applications. Approved by Lloyd’s Register of Shipping.
Crosslink Technology Inc.
Crosslink Technologies CLR1821
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting, Potting
End Uses:
Encapsulant, Electrical/Electronic Applications, Electrical Components
Volume Resistivity:
40000000000000.0 - 40000000000000.0 Ohm-m
CLR1821 is a filled, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive filler and convenient mix ratio makes it suitable for processing in automatic dispense equipment. This product is certified with ul and passes ul94-v1 flammability testing.
BCC Products
BCC Resins™ BC 8642
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
BCC Kwik Kast/Blue is a two component, fast setting polyurethane reproduction plastic. BC 8642 sets to a demoldable hardness within 30 minutes @ 77°F. Uses include; tracing models, core boxes, duplicating aids, patterns, prototypes, low temperature vacuum form tools, etc..
Chemiplastica
Urochem 191
Polymer Name:
Urea Formaldehyde Resin (UF)
Processing Methods:
Injection Molding
End Uses:
Buttons
Tensile Strength:
45.0 - 45.0 MPa
Urochem 191 is a highly refined cellulose as filler, and further modified with minor amounts of special purpose additives, pigments, cure regulators and lubricants. The Urochem 136 Molding Compounds can be supplied in an almost unlimited range of colors from translucent light pastels to black. Molded parts are free from odor; UV stable with good moisture resistance Hard, glossy and scratch resistant surface Excellent chemical resistance Fats, oils and common organic solvents like alcohol and acetone do not attack molded parts which are also resistant to surfactants and weak bases. They will withstand attack from weak acids for a shorter duration. Excellent electrical properties (arc quenching, tracking, flame resistance). Oxygen index of 30% is achieved without the use of external flame retardants. No halogens are present in the composition.
Raschig
RALUPOL® UP 4806
Polymer Name:
Thermoset Polyester
Processing Methods:
Injection Molding, Compression Molding
End Uses:
Relay Bases
Density:
2150.0 - 2190.0 kg/m³
RALUPOL® UP 4806 molding compounds are characterized by excellent dimensional stability with very low processing and post-shrinkage. Due to their high rigidity and excellent heat resistance, RALUPOL® products withstand short-term heat loads. They have excellent electrical insulation and dielectric properties, which are retained even with long-term use at high temperatures. The reason for this is high tracking resistance (CTI> 600 V), arc resistance, glow wire test (GWFI 960 ° C) and a high electrical RTI (relative temperature index) of 170 ° C according to UL 746 (IEC 60216 / T1).
HK Research
HK Research R0075
Polymer Name:
Thermoset Polyester
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools
Density:
1080.0 - 1080.0 kg/m³
HK Research R0075 Crystal Clear Casting Resin is UV light-stabilized to help maintain its color and clarity for many years.
Hapco Inc.
Di-Pak™ R-4243
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
RIGIDDI-PAK R-4242/4243Low cost, fast set potting compounds with excellent properties and FAST TURNOVER. R-4242/4243 are 1:1 by weight or volume, making them ideal for hand pour or automatic metering systems.
DUGALAK
DEPOL SH
Polymer Name:
Thermoset Polyester
Processing Methods:
Spray Lay-Up, Filament Winding, Hand Lay-Up
DEPOL SH is a middle reactive, self-extinguishing unsaturated HET-acid based polyester resin.
Rampf Group
RAKU® TOOL EH-2945
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Industrial Castings, Prototyping, Mold Making, Tooling
RAKU® TOOL EH-2945 is a spreadable and sculptable tool that is used in E84 Class A. Substrate dependent, E-84 Class A required anywhere, Molded Themed Castings, Scenery, Sculptures and Design Models.
Kemrock Industries and Exports
Kemrock Industries and Exports KPR 6420
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Processing Methods:
Pultrusion
Density:
1120.0 - 1120.0 kg/m³
KPR 6420 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6420 is suitable for processing by pultrusion. Recommended for FRP composites.
Lucobit AG
Lucobit® 1221
Polymer Name:
Polyethylene Copolymer
Processing Methods:
Film Extrusion, Profile Extrusion, Injection Molding
End Uses:
Roofing Membranes, Construction Applications
Density:
970.0 - 970.0 kg/m³
Lucobit® 1221 by Lucobit AG is comprised of Crosslinkable Polyethylene and Polyethylene Copolymer. It is commonly used It is available in Granules form.
BCC Products
BCC Resins™ BC 5114
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Lamination
End Uses:
Laminates
BC 5114 is a gray low viscosity laminating system. This heat resistant resin exhibits excellent wet out, reasonable working time and may be used at room temperature without postcuring. For use above 150°F a post-cure is required. Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours at 300°F. BC 5105 can afford consistent use to 300°F if required. Does not contain VCHD or MDA. Typical uses include constructing vacuum form tools, Injection and compression molds, RTM and RIM molds, and matched dies.
Hapco Inc.
Di-Pak™ E-4595-3
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4500 SERIESFlexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Flame retardant (FR), accelerated 3 minute (-3) gel time, and black or unpigmented versions are available.
BB Resins
BB Resins BB-EPA 1100
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Coating
BB Resins BB-EPA 1100 is a medium viscosity unmodified epoxy resin obtained by blend of Bisphenol A/Bisphenol F based resins.
Show
36
of 922 results
Go to page
1
2
3
4
5
6
7
8
9
10