Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Ready-to-Use Products
Cleaners
Products in Cleaners
3,002 Products found in Cleaners
Browse
Applications
Show All 3 Categories
Filters
Suppliers
Applications
Product Type
Chemical Family
Labeling Claims
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
American Water Chemicals
Everflux®
Ready to Use Product Type:
Descalers, Cleaner
Certifications & Compliance:
NSF Approved, NSF/ANSI 60
Application Areas:
Membranes
Everflux® is a super concentrated RO antiscalant for reduced shipping cost.
American Water Chemicals
Pureflux® M
Ready to Use Product Type:
Descalers, Cleaner
Certifications & Compliance:
NSF Approved, NSF/ANSI 60
Application Areas:
Membranes
Pureflux® M is a broad spectrum antiscalant designed to inhibit inorganic scale formation in membrane separation processes.
American Water Chemicals
AWC® A-111 Plus
Ready to Use Product Type:
Descalers, Cleaner
Certifications & Compliance:
NSF Approved, NSF/ANSI 60
Application Areas:
Membranes
AWC® A-111 Plus is a broad spectrum phosphorous-free RO antiscalant designed for use in municipal potable water systems.
American Water Chemicals
Megaflux® AC
Ready to Use Product Type:
Descalers, Cleaner
Certifications & Compliance:
NSF Approved, NSF/ANSI 60
Application Areas:
Membranes
Megaflux® AC is a premium broad spectrum antiscalant designed to inhibit inorganic scale formation in membrane separation processes.
American Water Chemicals
Pureflux® GW
Ready to Use Product Type:
Descalers, Cleaner
Certifications & Compliance:
NSF Approved, NSF/ANSI 60
Application Areas:
Membranes
Pureflux® GW is a broad spectrum antiscalant designed to inhibit inorganic scale formation in membrane separation processes.
American Water Chemicals
Veraflux®
Ready to Use Product Type:
Descalers, Cleaner
Certifications & Compliance:
NSF Approved, NSF/ANSI 60
Application Areas:
Membranes
Veraflux® is phosphorous-free, 11X concentrated reverse osmosis antiscalant (by volume) for reduced shipping cost.
American Water Chemicals
AWC® A-104
Ready to Use Product Type:
Descalers, Cleaner
Certifications & Compliance:
NSF Approved, NSF/ANSI 60
Application Areas:
Membranes
AWC® A-104 is highly effective for inhibition of sulfate and phosphate scales.
American Water Chemicals
AWC® A-112
Ready to Use Product Type:
Descalers, Cleaner
Certifications & Compliance:
NSF Approved, NSF/ANSI 60
Application Areas:
Membranes
AWC® A-112 is a premium phosphorous-free RO antiscalant with broad spectrum capabilities. Effective for inhibition of sulfate and phosphate scales at very high saturation potentials. Good tolerance to ferric coagulant carryover.
American Biosystems
Maintain® L
Ready to Use Product Type:
Cleaner, Degreasers
Application Areas:
Drains, Pipes
MAINTAIN® L is a scientifically blended liquid concentrate of specially selected and cultured bacteria for their enzyme producing abilities, which under favorable conditions will digest and liquefy organic wastes. This process will unclog drain lines, grease traps, vent pipes and stacks, air conditioning cooling towers, etc. Retreatment on a regular preventive maintenance schedule will keep these operating properly. This product is designed to be used with a metering device.
American Water Chemicals
AWC® D-303
Ready to Use Product Type:
Cleaner
Certifications & Compliance:
NSF Approved, NSF/ANSI 60
Application Areas:
Membranes
AWC® D-303 is a fast-acting oxidizing microbiocide for use with Reverse Osmosis (RO) / Nanofiltration (NF) membrane systems. NSF approved for use with potable water systems.
American Water Chemicals
AWC® D-615P
Ready to Use Product Type:
Cleaner
Certifications & Compliance:
NSF Approved, NSF/ANSI 60
Application Areas:
Membranes
AWC® D-615P is a fast-acting oxidizing microbiocide for continuous dosing or off-line cleaning in membrane systems. NSF approved for use with potable water systems.
Premier Building Solutions
XtraFoam™ CLEANER - Foam & Adhesive Cleaning Solvent
Ready to Use Product Type:
Cleaner
Compatible Substrates & Surfaces:
Porcelain, Foam, Plastics, Glass, Wood, Chrome, Iron, Steel, Marble, Polyurethane, Metal
Features:
Degreasing, Easy To Dispense
MG Chemicals
MG Chemicals 8309 -P - Conformal Coating Remover Pen
Ready to Use Product Type:
Spot Removers
8309 is a liquid conformal coating stripper that readily removes most thermoplastic and non-cross linked coatings, such as acrylics, urethanes, and silicones based conformal coatings. It also facilitates the removal of some thermoset coatings, like cross-linked silicones and polyurethanes, by softening or swelling the coat to aid with mechanical removal. This stripper is safe for most types of PCB components.
MG Chemicals
MG Chemicals 8361 - Label and Adhesive Remover
Ready to Use Product Type:
Cleaner
Certifications & Compliance:
RoHS Compliant
Features:
Anti-Static, Anti Dripping, Non Abrasive
8361 Label and Adhesive Remover is formulated to effectively remove adhesive, sticker, and ink residues. It contains a pleasant odor which makes the product easy to work with.
MG Chemicals
MG Chemicals 407C - Audio/Video Head Cleaner
Ready to Use Product Type:
Cleaner
Application Areas:
Electronic Components, Equipment
Features:
Anti-Static
The 407C Audio Video Head Cleaner is designed to provide optimal cleaning power while remaining safe for equipment. It efficiently removes greases, oils, carbon, static, dirt, and grim. The 407C is used for cleaning components of VCR, CD, DVD, Blu Ray, magnetic backup systems, mini video tape cameras, and mini-cassette players. It is also used for cleaning disk heads, optical tape drive lens, and magnetic tape heads.
MG Chemicals
MG Chemicals 825 - Glass Cleaner
Ready to Use Product Type:
Cleaner
Compatible Substrates & Surfaces:
Glass
Features:
High Foaming, Dust-Free
The 825 Glass Cleaner is an all-purpose, non-streaking, and high foaming action cleaner. It removes dusts, fingerprints, light oils, and residues, leaving surfaces bright and clean.
MG Chemicals
MG Chemicals 408C - Rubber Renue
Ready to Use Product Type:
Cleaner
Application Areas:
Equipment
Features:
Excellent Elasticity, Tacky, Improved Flexibility
408C restores old rubber parts that have become hard and lost their tackiness and flexibility. It causes the rubber to expand, allowing dirt to be removed from its pores. When the solvent dries, the rubber returns to its form and remains tacky. This product restores the tackiness of platens and rollers as well as helping remove dirt, ink, and sticky residues. It may also restore the flexibility of belts, conveyors, and seals.
MG Chemicals
MG Chemicals 8310A - Conformal Coating Remover Gel
Ready to Use Product Type:
Spot Removers
8310A is a conformal coating stripper that readily removes most thermoplastic and on-cross linked coatings such as acrylics, urethanes, and silicones based conformal coatings. It also facilitates the removal of some thermoset coatings like cross-linked silicones and polyurethanes by softening or swelling the coat to aid with mechanical removal. This stripper is safe for most types of PCB components.
MG Chemicals
MG Chemicals 824-400ML - Isopropyl Alcohol Spray UK
Ready to Use Product Type:
Cleaner
Application Areas:
Printed Circuit Boards, Equipment, Electronic Components
Chemical Family:
Alcohols
Features:
Non Corrosive, Very Low Surface Energy, High Solvency, Fast Drying
824-400ML - Isopropyl Alcohol Spray UK This is 99.9% ACS reagent grade isopropyl alcohol aerosol spray for cleaning electronics. Good solvency, low surface tension, and aerosol pressure make it an effective flux remover and general electronics cleaner. It effectively cleans ionic, polar and non-polar residues. It is safe on most painted surfaces, plastics, and elastomers. It leaves no residue, evaporates quickly relative to water, and does not cause corrosion. It is anhydrous, hydroscopic, and fully miscible with water. It is low toxicity compared to alternative solvents and is similarly relatively environmentally benign, being ozone safe with excellent “green solvent” scores. This product is packaged as an aerosol, however, it is also offered as a liquid and as a presaturated wipe. Additionally, we offer liquid 70% IPA and 70% IPA presaturated wipes.
MG Chemicals
MG Chemicals 4050 - Safety Wash for Electronics
Ready to Use Product Type:
Cleaner
Application Areas:
Electronic Components, Printed Circuit Boards
Chemical Family:
Alcohols
Features:
High Purity
The 4050 Safety Wash for Electronics is a high purity, printed circuit board cleaner and solvent. It uses a blend of high purity ethyl alcohol, isopropyl alcohol, and ethyl acetate components designed not to leave solvent contaminations behind. The alcohol and organic solvent blend is sufficiently strong to dissolve light to moderate grease and organic contaminants, as well as being polar enough to remove ionic flux residues and inorganic soils. It is an excellent choice when IPA alone is not powerful enough to dissolve greasy contaminants.
MG Chemicals
MG Chemicals 824-450G - Isopropyl Alcohol Aerosol Spray
Chemical Family:
Alcohols
Ready to Use Product Type:
Cleaner
Application Areas:
Electronic Components, Equipment, Printed Circuit Boards
Features:
Fast Drying, High Purity, Non Corrosive, Very Low Surface Energy, High Solvency
The 824 Isopropyl Alcohol (IPA) is a high purity cleaner and solvent. The purity level meets Grade A standard for MIL Spec TT-I-735A and ASTM D770, ensuring that no contamination occurs from its use. As a cleaner, it is fully miscible in water and most organic fluids, making it good at dissolving dirt, light organic contaminants, and ionic flux residues. Since the 824 is highly anhydrous (without water) and hygroscopic (absorbs humidity), it readily scavenges water off surfaces, trapping the water in the IPA solution as an azeotropic mixture. This helps to dehumidify surfaces. As a solvent, it acts as a moderate evaporation, ‘plastic safe’ diluent (see compatibility chart on page 3) and is used to improve the properties of paint resins and other heterogeneous solid mixtures. Therefore, it serves as a useful carrier solvent to adjust the rheological properties and compatibilities of complex mixtures. Due to IPA’s volatility, it resists entrapment in the coating. As it dries, it gives off a very light odor, which is not bothersome but serves as a cue to limit over-exposure due to poor ventilation.
MG Chemicals
MG Chemicals 8361A-P - Label and Adhesive Remover Pen
Ready to Use Product Type:
Cleaner
Certifications & Compliance:
RoHS Compliant
8361A-P label and adhesive remover pen applies a solvent that soaks through labels to dissolve the adhesive backing, releasing the label. It can then be used to quickly clean up adhesive residues left behind. It can also be used to remove some inks and cured adhesives.
MG Chemicals
MG Chemicals 407D - Audio/Video Head Cleaner
Ready to Use Product Type:
Cleaner
Application Areas:
Electronic Components, Equipment
Features:
Anti-Static
407D is designed to provide optimal cleaning power while remaining safe for equipment. It efficiently removes greases, oils, carbon, static, dirt, and grime. This product is used for cleaning components of VCR, CD, DVD, Blu-ray, magnetic backup systems, mini-video tape cameras, and mini cassette players. It is also used for cleaning disk heads, optical tape drive lens, and magnetic tape heads.
MG Chemicals
MG Chemicals 8241 - 70% Isopropyl Alcohol
Ready to Use Product Type:
Cleaner
Application Areas:
Electronic Components, Printed Circuit Boards, Equipment
Chemical Family:
Alcohols
Certifications & Compliance:
RoHS Compliant
Features:
Fast Drying
8241 Isopropyl Alcohol 70/30 is an electronics cleaner. The liquid is fully miscible with water and a large variety of organic solvents, making it good at dissolving dirt, dust, greases, and light organic contaminants. It is quick drying relative to water and leaves no residue. As it dries, it gives off a light alcohol odor, which is not bothersome and serves as a cue to limit over-exposure due to poor ventilation. Since it is safe for paints, metals, and plastics, 8241 is widely used to clean a variety of electronic equipment and peripherals. Another use is to wash off harsh organic solvents like acetone that might damage the substrate surface.
MG Chemicals
MG Chemicals 402C - Non-Flammable Air Duster UK
Ready to Use Product Type:
Cleaner
Features:
Cost Effective
402C spray duster is a pressurized gas duster made with 100% HFO-1234ze which is non-flammable, non-conductive, moisture free, zero residue, and has a global warming potential of less than 1. Its powerful blast blows away microscopic dust, lint, and foreign particles. Recommended for use in home or office over 402A.
MG Chemicals
MG Chemicals 408A - Rubber Renue
Ready to Use Product Type:
Cleaner
Application Areas:
Equipment
Features:
Excellent Elasticity, Tacky, Improved Flexibility
The 408A Rubber Renue™ restores old rubber parts that have become hard and lost their tackiness and flexibility. It causes the rubber to swell, allowing dirt to come out of its pores. When the solvent dries, the rubber returns to its form and remains tacky, allowing rollers and platens to retain their grip.
MG Chemicals
MG Chemicals 411 - HFE Electronics Cleaner
Ready to Use Product Type:
Cleaner
Application Areas:
Printed Circuit Boards, Equipment, Electronic Components
Chemical Family:
Ethers
Certifications & Compliance:
EPA Registered
Features:
Excellent Compatibility, Very Low Surface Energy, Low Viscosity, Chemical Resistant
The 411 HFE Electronics Cleaner is a hydrofluroether, zero residue, plastic safe, non-flammable, and nonconductive cleaner degreaser that can be used on live circuits. The cleaner provides a high degree of safety for the equipment, workers, and the environment without sacrificing performance. It is approved by the EPA under the SNAP program as a low toxicity replacement of ozone-depleting substances. It offers a similar cleaning performance to similar CFC type cleaners but without the accompanying safety concerns. Due to its high density, low surface tension, and low viscosity, the 411 cleaner will easily drip off even the most complex geometries without becoming trapped in small spaces.
MG Chemicals
MG Chemicals 406B - Super Wash™
Ready to Use Product Type:
Cleaner
Application Areas:
Electronic Components, Printed Circuit Boards, Equipment
Certifications & Compliance:
RoHS Compliant
Features:
Fast Drying
The 406B Super Wash™ Electronics Cleaner is a very fast drying and zero residue cleaner degreaser for PC boards. This hydrocarbon-based cleaner is perfect for quick PC boards cleaning. When used as a secondary rinse, it accelerates the drying time of boards treated with slower drying cleaners. Great for dissolving many types of flux. Cleans and degreases printed circuit boards, machinery, electrical and electronic devices.
MG Chemicals
MG Chemicals 401B - Nu-trol Control Cleaner
Ready to Use Product Type:
Cleaner
Application Areas:
Electronic Components, Equipment
Certifications & Compliance:
RoHS Compliant
Features:
Excellent Lubricity
The 401B Nu-Trol™ Control Cleaner for Electronics is a unique blend of high purity solvents and a lubricating mineral oil that is excellent for cleaning and lubricating delicate moving parts in electronics. The solvent system also effectively dissolves oil and organic residues. This product is useful in a variety of electronics applications such as controls, potentiometers, dials, switches, tuners, and servomechanisms.
MG Chemicals
MG Chemicals 8309 - Conformal Coating Remover
Ready to Use Product Type:
Cleaner
Features:
Low Viscosity
8309 is a liquid conformal coating stripper that readily removes most thermoplastic and non-cross linked coatings, such as acrylics, urethanes, and silicones based conformal coatings. It also facilitates the removal of some thermoset coatings, like cross-linked silicones and polyurethanes, by softening or swelling the coat to aid with mechanical removal. This stripper is safe for most types of PCB components.
MG Chemicals
MG Chemicals 826 - Static Off™ Antistatic Foaming Spray
Ready to Use Product Type:
Cleaner
Application Areas:
Equipment
Compatible Substrates & Surfaces:
Glass
The 826 Static Off™ Antistatic Foaming Spray has non-drip formulation that effectively polishes and eliminates static charges with a single application. The spray is safe on all surfaces and gives a streak-free finish for improved optical clarity and distortion-free reading.
DeVere Chemical
DeVere Chemical WOW50 An All Purpose Cleaning Product
Ready to Use Product Type:
Detergents, Degreasers, Multipurpose Cleaners
Application Areas:
Asphalt Tile, Laundry, Equipment, Wall, Floor, Refrigerators, Automotive Interior Trim, Upholstery, Windshields, Quarry Tiles, Woodwork, Furniture
Compatible Substrates & Surfaces:
Vinyl, Cork, Asphalt, Linoleum, Ceramic, Wood, Concrete, Styrene Butadiene Rubber (SBR), Vinyl Asbestos
Features:
Degreasing
DeVere Chemical WOW50 An All Purpose Cleaning Product is a less aggressive version of DeVere’s best-selling all-purpose-cleaner, WOW. This product is a fast-acting, strong liquid detergent and degreaser for all cleaning jobs. WOW50 is safe to use on all types of floors and is ideal for floor scrubbers, wet vacuums, or hand mopping. It easily removes black heel marks too.
DeVere Chemical
DeVere Chemical Powder Descaler
Ready to Use Product Type:
Descalers, Industrial Cleaners
Application Areas:
Industrial Surfaces
Certifications & Compliance:
Kosher
Features:
Scale Inhibiting, Hard Water Resistance
DeVere Chemical Powder Descaler is a cooling pad descaler designed for use with Munters® CELdek® evaporative cooling pads and other specialty pads designed for evaporative cooling.
DeVere Chemical
DeVere Chemical Acid CIP
Ready to Use Product Type:
Acid Cleaners, Virucide
Application Areas:
Industrial Surfaces
Features:
Free Rinsing, Effective Soil Removal, Low Foaming, Hard Water Resistance
DeVere Chemical Acid CIP is a concentrated, low-foam liquid acid rinse. This product is designed for use in the final rinse cycle after an alkaline clean-in-place wash. Acid CIP works best where low-foam characteristics are desirable and soils are primarily mineral. Acid CIP is strong enough to handle the most challenging mineral soils and works well even in very hard water. This product is free-rinsing with normal water pressure.
DeVere Chemical
DeVere Chemical Deodorant Block
Ready to Use Product Type:
Deodorizers
Application Areas:
Bathrooms, Urinals
Features:
Neutralizes Odor, Long Shelf Life
DeVere Chemical Deodorant Block is an easy-to-use restroom deodorizer. This Deodorant Block has a pleasant cherry scent that will immediately begin to neutralize objectionable odors. It provides long-lasting deodorizing. Use Deodorant Block with DeVere Urinal Screens for complete urinal maintenance. This product is considered biodegradable and does not contain any known carcinogens.
DeVere Chemical
DeVere Chemical InstantFoam Non-Alcohol Foaming Hand Sanitizer
Ready to Use Product Type:
Sanitizers
Application Areas:
Food Processing, Bathrooms
DeVere Chemical InstantFoam Non-Alcohol Foaming Hand Sanitizer provides instant hand sanitizing without water. It kills 99.99% of most common germs in 15 seconds. InstantFoam Non-Alcohol Foaming Hand Sanitizer is gentle to the skin and hypoallergenic. It has a mild lavender scent and leaves no sticky residue on the hands.
Show
36
of 3,002 results
Go to page
1
2
3
4
5
6
7
8
9
10