Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Key Attributes
- Suitable for Use in Food Facilities as a Non-Food Chemical—Canadian and NFS recognition letters available on request
- Safe on many plastics
- Zero residue
- Fast evaporation rate
- Dissolves oils and residues
- RoHS compliant
Attention !
- Do NOT use on live circuits.
- For use on equipment that will not tolerate aqueous cleaning solutions. Not for use in direct contact with food.
Applications & Uses
- Markets
- Application Area
- Application Instructions
To clean residues in aerosol format
- Spray dirty area.
- Ensure that wash runs off the circuit board along the shortest unencumbered path to prevent redeposit of solvated residues
Properties
- Odor
- Mild hydrocarbon
- Physical Properties
| Value | Units | Test Method / Conditions | |
| High Purity | No residue | — | — |
| Color | Clear | — | — |
| Density (at 25 °C, 77 °F) | 0.66 | g/mL | — |
| Viscosity (at 25 °C, 77 °F) | 0.3 (0.0003) | cP (Pa·s) | Brookfield SP1 |
| Flash Point | -29 (-20) | °C (°F) | Closed Cup |
| Boiling Point | 52 (126) | °C (°F) | — |
| Vapor Pressure (at 25°C [77 °F] | 33 (250) | kPa (mmHg) | — |
| Relative Evaporation Rate | 0.8 (Ether = 1); 9.4 (ButAc=1) | — | — |
| Volatile Organic Content (VOC) | 100 | % | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Compatibility
Substrate Compatibility: Consult 406B partial compatibility chart table for substrate compatibility. It is always recommended to perform a compatibility test on a non-critical test area prior to large scale applications. Perform this test even if the chart predicts high compatibility since modern plastic parts may incorporated hidden incompatible materials in the form of plastic blends or as protective and decorative coatings.
Compatibility Chart
Plastic type Resistance Epoxy Very Good ABS (acrylonitrile butadiene styrene Poor PMMA (Acrylic) Good PVC (Polyvinyl chloride) Good HD-PE (high density polyethylene) Good LD-PE (low density polyethylene) Partial PP (polypropylene) Good PS (polystyrene) Partial PC (Polycarbonate) Poor Solvent Miscibility :The 406B is generally miscible organic solvent, but it is immiscible with water.
Attention : Use with care on thin plastics or near parts that are chemically sensitive.
- Solvation Parameters
Solvation Parameters Value Solubility in Water
KB (Kauri Butanol) ValueInsoluble 30 Hansen Solubility Parameters a)
Total
Non-Polar
Polar
Hydrogen Bonding(MPa)½ 14.9 14.9 0 0 - a) Hansen parameters calculate using component literature values and volume fraction composition.
Safety & Health
- Areas of Application
Please see the 4050 Safety Data Sheet (SDS) for more details on transportation, storage, handling and other security guidelines.
Environmental Impact: The 4050 has a high volatile organic content of 100%. Avoid runoff into storm and sewer drains. This product is readily biodegradable.
Health and Safety: This product is flammable and shouldn’t be used in the presence of open flames or other ignition source. Avoid prolonged breathing of vapors. Use with adequate ventilation.
NOTE: This product is not intended as a disinfectant for humans or animals. It was not treated to remove possible fungal spores or rare alcohol-resistant bacterial strains. Further, high purity anhydrous IPA is not an effective disinfectant.
HMIS® RATING
NFPA® 704 CODES
Approximate HMIS and NFPA Risk Ratings Legend: 0 (Low or none); 1 (Slight); 2 (Moderate); 3 (Serious); 4 (Severe).
Packaging & Availability
- Packaging and Supporting Products
Cat. No. Packaging Net Volume Net Weight Packaging Weight
406B-425G Aerosol 590 mL/ 20.0 fl oz 425 g/ 14.9 oz 5.72 kg a)/ 12.6 lb a)
- a) Case pack of ten
Supporting Products
- Hog Hair Cleaning Brush: Cat. No. 852
- Large Hog Hair Cleaning Brush: Cat. No. 853
Storage & Handling
- Shelf Life
- 5 Years
- Temperature Ranges
Properties Value Storage Temperature Limits a) -20 to 40 °C [-4 to 104 °F] a) Storage below zero is not necessary. Cool, dry, and well ventilated area recommended.