Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Ready-to-Use Products
Foams
Products in Foams
436 Products found in Foams
Filters
Suppliers
Applications
Chemical Family
End Uses
Physical Form
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
ETECO
ETECO Flexible Pour Foam F7151
Foam Type:
Memory Foam, Flexible Foam, 2K System
Density:
1010.0 - 1030.0 kg/m³
Chemical Family:
Polyurethanes (PU)
Flexible Pour Foam F7151 is a high-performance, Semi-flexible polyurethane foam designed for processing through plural component low or high-pressure dispensing equipment. Once fully cured, Flexible Pour Foam F7151 is tough and flexible.
Adil Kaucuk
Adil Kaucuk 1094100 Sulfur-free EPDM Sponge
Foam Type:
Closed Cell Foam
Density:
100.0 - 100.0 kg/m³
Chemical Family:
Ethylene-Propylene-Diene Copolymers (EPDM)
End Uses:
Transportation Seal
Physical Form:
Sheets, Blocks, Foam
Adil Kaucuk 1094100 Sulfur-free EPDM Sponge belongs to closed cell EPDM foams. It has excellent air & UV resistance, and is available in Block/Sheet/Roll form.
Hibco Plastics
Hibco Plastics Crosslinked Foam
End Uses:
Closure Strips, Gaskets, Military Applications, Seals, Floor
Crosslinked Foam contains cross-linked bonds in the polymer structure that changes a thermoplastic into an elastomer. Crosslinked Foam is for industrial, orthopedic, and construction use where durability is required.
Soundcoat
Soundcoat Soundfoam HTC
Foam Type:
Flexible Foam
Density:
7.051 - 7.051 kg/m³
Chemical Family:
Polyimides (PI)
End Uses:
Acoustic Barrier, Appliances, Marine Applications
Soundfoam HTC is lightweight, flexible, open cell polyimide foam.
Griffon
Griffon PU-FOAM
Chemical Family:
Polyurethanes (PU)
Physical Form:
Foam
Griffon PU-FOAM is Fast curing polyurethane foam for insulating, sealing and filling of seams, joints, gaps, holes and cracks. .
Mayser GmbH & Co KG
INDUPHON® VB/Vlies
Chemical Family:
Polyurethanes (PU)
End Uses:
Consoles, Engine Housing, Roofing Membranes, Armrests, Bonnet Insulation, Door Panels, Rear Parcel Shelves, Housing, Acoustic Barrier
INDUPHON® S/Quadro acoustic insulation consists of acoustically effective foams that are used in the construction of vehicles and machines to absorb airborne sound. Materials and surfaces define the acoustic absorption in different frequency ranges and also fulfill other requirements. INDUPHON® acoustic foam is a sound-absorbing material made of modified PUR foam. The selection of special foam and surface qualities allows adaptation of the ab- sorption behavior to a specific frequency range. Its a composite foam up to RG 100.
Natural Polymers LLC
Natural Therm® 2.0 HFO
Foam Type:
Closed Cell Foam, 2K System
Density:
32.05 - 32.05 kg/m³
Chemical Family:
Polyurethanes (PU)
Natural-Therm® 2.0 HFO Series comes in two standard reactivty profiles, IBS "summer" and IBW "winter" is a zero Ozone Depleting Bio-Preferred insulation with low Global Warming Potential (GWP). This two-componet, semi rigid spray polyurethane foam insulation complies with the international Code Council's AC377 standard and is certified by GreenGuard for its non emissive low VOC technology. Natural-Therm 2.0 HFO Series offers a self adhering, seamless insulation that can be used in many areas of the building envelope, including, open wall cavities, crawlspaces, perimeter rim joists, cathedral ceilings and garage ceilings
Three-Sixty Solutions
Solu-Cell E1500
Foam Type:
Closed Cell Foam
Density:
16.0 - 32.0 kg/m³
Chemical Family:
Ethylene Vinyl Acetate (EVA)
End Uses:
Noise Barriers, Shoes, Gaskets
Physical Form:
Foam
Solu-Cell E1500 is a chemically cross linked polyolefin based foam material.
Palziv
GalFoam™ GA25
Foam Type:
Closed Cell Foam
Density:
24.9712 - 24.9712 kg/m³
Chemical Family:
Polyethylenes, Polyolefins
GalFoam™ GA25 is manufactured in rolls using extrusion technology. GalFoam is developed and produced in-house which is a extruded role foam.
Bilsan Kaucuk Plastik
Bilsan Kaucuk Plastik BİL-XPE FOAM
Foam Type:
Closed Cell Foam
Density:
27.0 - 33.0 kg/m³
Chemical Family:
Polyolefins, Polyethylenes
End Uses:
Acoustic Barrier
Bilsan Kaucuk Plastik BİL-XPE Foam has a closed pore structure and can be produced in desired density, thickness and color between 30-200 kg/m³.
Soundcoat
Soundcoat Cabfoam
Foam Type:
Open Cell Foam, Flexible Foam
Density:
32.05 - 32.05 kg/m³
Chemical Family:
Polyurethanes (PU)
End Uses:
Seats, Automotive Headliner, Appliances, Acoustic Barrier
Cabfoam is an acoustic quality, flexible, open cell polyurethane foam, having an exclusive honeycomb pattern and a tough polymer finish.
MHXCo Foam Company
Xolefin® 4 ZXVM
Foam Type:
Closed Cell Foam
Density:
64.0 - 64.0 kg/m³
Chemical Family:
Polyolefins
Physical Form:
Foam
Xolefin® 4 ZXVM is an irradiation cross-linked, closed-cell EVA foam. The ZXVM products exhibit a fine cell structure and excellent mechanical properties at low densities. Xolefin® ZXVM foams are soft, conforming. It can be laminated for greater thickness or to other substrates, as well as die cut, printed, or adhesive coated.
Soundcoat
Soundcoat Soundfoam S
Density:
24.0375 - 24.0375 kg/m³
Chemical Family:
Polyurethanes (PU)
Soundfoam S is polyether based urethane foam ideal for the transportation industry.
ETECO
ETECO Flexible Pour Foam F7203
Foam Type:
Flexible Foam, 2K System, Memory Foam
Density:
1070.0 - 1090.0 kg/m³
Chemical Family:
Polyurethanes (PU)
Flexible Pour Foam F7203 is a high-performance, flexible polyurethane foam designed for processing through plural component low or high pressure dispensing equipment. Once fully cured, Flexible Pour Foam F7203 is tough, flexible and dimensionally stable.
Elastochem Specialty Chemicals
Insulthane® 450 NM ocSPF
Foam Type:
Open Cell Foam
Density:
8.490208 - 8.490208 kg/m³
Chemical Family:
Polyurethanes (PU)
End Uses:
Foamed Insulation Board
Physical Form:
Foam
Insulthane® 450 NM ocSPF is a no-mix two component open-cell spray polyurethane foam insulation that can be applied in a wide range of temperatures making it suitable for a variety of climate conditions. It features consistent and quality performance with easy no mix processing, meaning less downtime and higher jobsite efficiency. Insulthane 450 NM is designed to provide little to no voiding behind the insulation and in addition, exhibits superior self-adhesion. The high-yield formula expands to seal all cracks, voids and gaps to create a custom-fit insulation.
Fibran
FIBRANxps 400-L
Foam Type:
Rigid Foam
Chemical Family:
Styrenics
End Uses:
Roofing Tiles, Floor Coverings
Physical Form:
Blocks, Foam
FIBRANxps 400-L is a rigid water-resistant insulation board made from extruded polystyrene with smooth surface on both faces.
Rubberlite Incorporated
HyPUR-cel® R2015
Foam Type:
Resilience Foam
Density:
272.0 - 368.0 kg/m³
Chemical Family:
Polyurethanes (PU)
End Uses:
Shoes, Gaskets
Physical Form:
Foam
HyPUR-cel® R2015 is a unique polyurethane foam characterized by low hysteresis loss, high resilience, exceptional compression fatigue and compression set characteristics, and outstanding high energy return performance. These characteristics, along with the breathable nature of open-cell polyurethane, Which is a preferred alternative for high performance athletic insoles, gasketing, die ejection, and other demanding applications where resilient energy return is required.
Acoustical Solutions
AlphaSorb® Composite Foam
Foam Type:
Open Cell Foam
Density:
7.52 - 10.4 kg/m³
Chemical Family:
Melamines
End Uses:
Acoustic Barrier
Physical Form:
Foam
AlphaSorb® Composite Foam combines a mass loaded sound barrier with layers of absorptive acoustic foam to double up on sound control. This composite foam combines a the one pound per square foot sound barrier between two layers of acoustical foam. Together, these layers both absorb, block and isolate mid to high frequency noise. This reduces the overall transmission of sound when constructing sound enclosures or partitions.
Universal Polymers Corporation
Universal Polymers Corporation UPC 500 OCX
Foam Type:
2K System, Open Cell Foam, Closed Cell Foam
Chemical Family:
Polyurethanes (PU)
Physical Form:
Foam
UPC 500 OCX is a two component, water blown (zero ozone depleting chemical) light density, open cell spray polyurethane foam insulation that is designed to improve the performance of the building envelope for commercial, residential and industrial applications. UPC’s 500 OCX is taking the Appendix X spray foam market by storm! A sucrose-based formula that sprays just like a traditional open-cell foam, with no fuss, without clogging the gun, and with exceptional yield. The chemistry gives you the ability to spray consistently on-ratio and with exceptional controllability. Sprayers find the 500 OCX is the easiest “sugar” based foam they’ve ever worked with. For design professionals, the 500 OCX is one of the few low-density fire-rated formulas to pass the AC377 Appendix X - enabling you to leave the foam exposed in design assemblies where ignition barriers are required.
Crown General
Crown General PVC-foam D.320/350ST
Foam Type:
Closed Cell Foam
Density:
320.0 - 350.0 kg/m³
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives
End Uses:
Seals
Crown General PVC-foam D.320/350ST is our very high density foam can be used for various applications (anti-fatigue mats, vibration damping, mounting tape) as a cost-effective and high quality foam solution. This very high density foam is available in different thicknesses, colors and with special options.
iVEX Protective Packaging
ProFoam™ Roll 1/16"
Density:
16.0 - 24.0 kg/m³
ProFoam™ Roll 1/16" provides excellent surface protection. It provides good thermal insulation over a wide range of temperatures. It is efficient replacement for bulkier, heavier packaging materials that reduces solid waste.
Palziv
GalFoam™ GA90
Foam Type:
Closed Cell Foam
Density:
89.89632 - 89.89632 kg/m³
Chemical Family:
Polyethylenes, Polyolefins
GalFoam™ GA90 is manufactured in rolls using extrusion technology. GalFoam is developed and produced in-house which is a extruded role foam.
Rubberlite Incorporated
HyPUR-cel® I2040
Foam Type:
Flexible Foam
Density:
272.0 - 368.0 kg/m³
Chemical Family:
Polyurethanes (PU)
Physical Form:
Foam
HyPUR-cel® I2040 is a flexible polyurethane foam, characterized by exceptional high temperature compression set performance while maintaining excellent tensile, tear and elongation properties. These materials were developed for use in a diverse set of applications that include transportation, construction, footwear and industrial markets.
Porelon
Microporous Microfoam™
Physical Form:
Foam
Microporous Microfoam™ uses both capillary and centrifugal action. Microfoam’s porous foams demonstrate superior durability and dimensional stability under a wide temperature range, and they provide a unique solution for many harsh or severe environments.
C.B.Frost & Co.
BISCO® HT-800
Foam Type:
Syntactic Foam
Density:
352.0 - 352.0 kg/m³
Chemical Family:
Silicones
BISCO® HT-800 medium firm silicone foam embodies the transition in the BISCO Silicone Cellular series from soft and conformable to firm and durable. It simultaneously retains the lightness of a foam while exhibiting enhanced sealing capabilities of a traditional sponge rubber. Patented chemistry and cell structure provide a long-term performance advantage.
Foam Partner
Bolasto® W 800
Foam Type:
Skin Foam
Chemical Family:
Polyurethanes (PU)
End Uses:
Steering Wheel
Bolasto® W 800 is a new fluorocarbon-free PUR integral skin foam system for automotive applications, which is particularly recommended for low-emission lightweight steering wheels. Based on an innovative prepolymer technology, the system offers good mechanical properties combined with faster demolding time, thus saving valuable processing time in production.
LAMATEK
LAMATEK 2# Cross Linked Polyethylene Foam
Foam Type:
Closed Cell Foam
Density:
32.05 - 32.05 kg/m³
Chemical Family:
Polyethylene Cross-Linked (PEX), Polyethylenes, Polyolefins
End Uses:
Windows, Expansion Joints, Gaskets, Refrigeration, Cushion
Physical Form:
Foam
Lamatek 2# Cross Linked Polyethylene Foam are some of the most versatile and widely used tapes. Polyethylene, or PE, is a lightweight, closed cell foam used for sealing, cushioning, and spacing. Polyethylene foam tape is easy to customize with a wide variety of available options. For example, you can choose single or double sided adhesive in a wide range of bonding strengths. We also keep several thicknesses of polyethylene foam in inventory.
Kayfoam Woolfson
Kayfoam™ SR75
Foam Type:
Open Cell Foam
Density:
20.0 - 24.0 kg/m³
Chemical Family:
Polyurethanes (PU)
End Uses:
Mattresses, Medical Devices, Pharmaceutical Packaging, Furniture
Physical Form:
Foam
Kayfoam™ SR75 is manufactured in a wide range of hardness and density levels to meet the needs of diverse customers, sectors and industries.
Adil Kaucuk
Adil Kaucuk 1101180 EPDM Sponge
Foam Type:
Closed Cell Foam
Density:
180.0 - 180.0 kg/m³
Chemical Family:
Ethylene-Propylene-Diene Copolymers (EPDM)
End Uses:
Transportation Seal
Physical Form:
Sheets, Blocks, Foam
Adil Kaucuk 1101180 EPDM Sponge belongs to closed cell EPDM foams. It has excellent air & UV resistance, and is available in Block/Sheet/Roll form.
C.B.Frost & Co.
Plastazote® LD45
Foam Type:
Closed Cell Foam
Chemical Family:
Polyethylenes, Polyolefins
End Uses:
Gaskets
Plastazote® LD45 is a closed cell, cross-linked polyethylene block foam manufactured using Zotefoams unique production process.
FOAMLAND
FOAMLAND PVC foam
Foam Type:
Closed Cell Foam
Density:
100.0 - 400.0 kg/m³
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives
Physical Form:
Foam
Foamland PVC Foam is a closed cell foam, which is presented in roll, with different densities, colors, properties, with surface finishes, laminated with other materials, to respond to the array of needs that exist on the market.
Trocellen
Trocellen V3305 VNFX1 K95
Foam Type:
Closed Cell Foam
Chemical Family:
Polyolefins
Trocellen V3305 VNFX1 K95 is a halogen free foam portfolio which is produced without any kind of halogen (eg: bromine, chlorine) or heavy metal containing compounds. It provides the usual high technical performance while meeting new and more sophisticated customer needs as well.
K-FLEX USA
K-FLEX® DUCT® LINER GRAY
Foam Type:
Closed Cell Foam
Density:
48.0 - 96.0 kg/m³
Chemical Family:
Natural Rubbers, Polyisoprenes
Physical Form:
Foam
K-FLEX® Duct® Liner Gray is an NBR/PVC-based closed cell, flexible elastomeric foam thermal and acoustic insulation. It is environmentally friendly as it is free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, fungal and bacterial growth.
Polymer Technologies
POLYTECH® Silicone Foam grade 800 or 1000 (PSL)
Density:
320.0 - 320.0 kg/m³
Chemical Family:
Silicones
Physical Form:
Foam
POLYTECH® Silicone Foam grade 800 or 1000 (PSL)is a soft cellular silicone foam that is extremely resilient to mechanical fatigue and has high compression set resistance. It also has Excellent Flame Spread and Smoke Density values.
Natural Polymers LLC
Natural Therm® 0.50 IB PCF
Foam Type:
Open Cell Foam, 2K System
Density:
8.0125 - 8.0125 kg/m³
Chemical Family:
Polyurethanes (PU)
Natural-Therm® 0.50 IB is a 100% water blown, two-component, semi-rigid spray polyurethane foam insulation with a nominal 0.50 PCF in place density. Natural-Therm® 0.5 IB meets the NFPA 286 Appendix X room corner test for use in attics and crawl spaces without ignition barrier coating. This product provides superior energy efficiency and air infiltration control as a high-performance building envelope insulation system. Natural-Therm® 0.50 IB complies with the International Code Councils AC377 standard and certified by GreenGuard for its non emissive low VOC technology
Akfix
Akfix 805 Multi Purpose PU Foam
Foam Type:
1K System
Density:
19.0 - 25.0 kg/m³
Chemical Family:
Polyurethanes (PU)
Physical Form:
Foam
Akfix 805 Multi Purpose PU Foam is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gasses that are harmful to the ozone layer.
Show
36
of 436 results
Go to page
1
2
3
4
5
6
7
8
9
10