Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Foam Type
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features & Benefits
- Temperature independency
- UV/ Ozone resistant
- Rated to most stringent flame standards
Applications & Uses
- Markets
Properties
- Flame Rating
- Physical Properties
- Thermal Properties
- Flammability
Value | Units | Test Method / Conditions | |
Thickness | 0.79 - 12.70 | mm | — |
Density | 352.0 | Kg/m³ | — |
Compression Force Deflection | 67.0 | kPa | ASTM D1056 |
Compression Set (100°C,22 hrs / 50%) | 2.4 | % | ASTM D1056 |
Water Absorption (2” below water surface, 24hrs, change in weight) | 0.5 | % | Internal |
Value | Units | Test Method / Conditions | |
Temperature Range | -55 to +200 | °C | Internal |
Thermal Conductivity | 0.048 | W/m ºK | ASTM D518 |
Low Temperature Flex (-55°C, 5 hrs) | Pass | — | ASTM D1056 |
Low Temperature Brittleness (-55ºC, 3 min) | Pass | — | ASTM D746 |
Value | Units | Test Method / Conditions | |
Flame Resistance | V-0, HF-1 | — | UL 94 (File E83967) |
Flame Spread Index (Is, Flaming Mode) | max. 35 | — | ASTM E162 |
Smoke Density (Ds, Flaming Mode - 1.5min) | max. 100 | — | ASTM E662 |
Smoke Density (Ds, Flaming Mode - 4.0 min) | max. 200 | — | ASTM E662 |
Burn Length | Meets | — | FMVSS 302 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- Compliance
Statement of FDA compliance is based solely on the following: HT-800 (Gray) silicone foams (i) are compounded and cured under conditions of good manufacturing practice; and (ii) have been subjected to annual extraction testing in accordance with FDA Regulation 21 CFR 177.2600 paragraphs (e) and (f) and found to meet all extractives limitations, both of which are criteria set forth in 21 CFR 177.2600 as necessary for rubber articles intended for repeated use in those areas specified in the regulation.
Technical Details & Test Data
- Technical Details
Standard Thickness Tolerances
Nominal Thickness
Tolerance
mm (inches) mm (inches) 0.79 (0.031) 3.735294118 (+ 0.015/-0.004)
1.60 (0.063) ± 0.508 (± 0.020) 2.39 (0.094) ± 0.508 (± 0.020) 3.18 (0.125) ± 0.635 (± 0.025) 4.76 (0.188) ± 0.635 (± 0.025) 6.35 (0.250) ± 0.762 (± 0.030) 9.53 (0.375) ± 1.143 (± 0.045) 12.70 (0.500) ± 1.270 (± 0.050) Slit Material and Tape (PSA) Width Tolerances
Nominal Width
Tolerance
mm (inches) mm (inches) > 0 - 76 (> 0 - 3) ± 1.60 (± 0.063) > 76 - 203 (> 3 - 8) ± 2.39 (± 0.094) > 203 - 305 (> 8 - 12) ± 3.18 (± 0.125) > 305 - 457 (> 12 - 18) ± 4.78 (± 0.188) > 457 - 660 (> 18 - 26) ± 5.56 (± 0.219) > 660 - 914 (> 26 - 36) 25.4/- 0 (+ 1/- 0)