Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Foam Type
- Product Type
- CCMC Number
- 14444-L
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Quick & Easy Preparation - No mixing or agitation of the resin before application
- Consistent Application - Easy-to-control open-cell formula
- Wide Temperature Range - Application in a wide variety of temperature and climate conditions
- Great Self-Adhesion - Create a continuous barrier with each pass
- Minimizes Voiding - High expansion rate, filling voids and gaps
- Benefits
- Structural Strength - Increase racking strength and reduce complications caused by moisture and high wind events.
- Air, Water & Moisture - Extend the life of structures and prevent air leaks with an integrated air, water and moisture barrier.
- Design Flexibility - Seal hard-to-reach areas such as cavities, gaps and crevices without compromising your design.
- Sustainable - Structural Strength Maximize energy efficiency and reduce carbon emissions, while increasing comfort and savings.
- Features
- Industry-low GWP of 1 - Formulated with Honeywell Solstice® LBA
- Heating & Cooling Savings - Reduce energy expenses by 30-50%
- Approved Air Barrier - Listed as CCMC #14030-R
- Water & Vapor Control - Prevents moisture and mold damage
- Structural Strength - Rigid foam adds durability to buildings
- Higher Yields & Sprayability - Achieve more coverage with less product
- Ultra-low Global Warming Potential
Effective January 1, 2021, the use of Hydrofluorocarbons (HFCs) in spray polyurethane foams will be eliminated nationwide. Extreme is formulated without harmful HFCs resulting in an ultra-low Global Warming Potential (GWP) of 1i Compared to closed-cell alternatives that have GWPs ranging from 700-1400, Extreme offers the lowest GWP rating available. When you choose Extreme, you’re playing a critical part in the reduction of greenhouse gas emissions.
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Core Density | 8.5 | kg/m³ | ASTM D1622 |
Aged R-Value (90-Day, 50 mm) | RSI 1.33 | - | ASTM C518 |
Open-Cell Content (Procedure 2) | 97.0 | % | ASTM D6226 |
Dimensional Stability (-20°C, Volume Change after 28 days) | -1.0 | % | ASTM D2126 |
Dimensional Stability (80°C, Volume Change after 28 days) | -7.0 | % | ASTM D2126 |
Dimensional Stability (70°C, 97% ±3% RH, Volume Change after 28 days) | -6.0 | % | ASTM D2126 |
Flame Spread (Flame) | 405.0 | - | CAN/ULC-S127 |
Flame Spread (Smoke) | 235.0 | - | CAN/ULC-S102 |
Water Vapour Transmission (50 mm) | 535.0 | ng/(Pa·s·m²) | ASTM E96 |
Fungi Resistance | No Growth | - | ASTM C1338 |
Time to Occupancy | 25.0 | hours | - |
Regulatory & Compliance
- Certifications & Compliance