Products results

Aerotex 5 oz glass Tape is available in 25, 50, 75 and 100 mm width and sells per 100 m roll.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

622 Assembled Roving for Centrifugal Casting process is coated with a silane-based sizing, compatible with unsaturated polyester resins. 622 is a proprietary sizing formulation applied using a special manufacturing process which together result in an extremely fast wet-out speed and very low resin demand. These features enable maximum filler loading and therefore the lowest cost pipe manufacture. This roving is mainly used to manufacture centrifugal casting pipes of various specifications and some special spay-up processes.

COMFIL offer fabrics of the produced thermoplastic composite yarns.

G10001050T of G10001xxxT Series of Glass Nonwovens. is Wet-laid nonwovens consisting of 11-um diameter E-glassfiber staple (1/2") with 1-20 wt.% of polyvinyl alcohol binder. Widths can be specified.

Sudaglass Fiber Technology TRB 0.6 is a tough fireproof fabrics, these fabrics are manufactured to varying thickness, weight, weave pattern and weaving technique according to end-use requirements.

COMFIL develop and manufacture tailor-made thermoplastic composite yarns/roving

HexForce™ 1311 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

From classical man-made fibers to man-made fibers on cellulose base to high performance fibers. Glass fillament yarn 220 dtex can be used custom-designed for BAFA®-laid scrims.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

ROVICORE™ R 600/D3/600 is a reinforcement comprising a non-woven synthetic 180gsm core and two 600glass mats stitched one on each side of the core.It is used in closed-mold processes.

HexForce™ 690 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

ORCA CS MAT 3 OZ. X 5” ROLL LB. Orca Chopped Strand Mats consist of chopped glass fibers bonded together using a polyester powder. The mats are designed to be compatible with unsaturated ortho polyester, iso polyester, vinyl este and a variety of other resins.

Style 1161 is 3.87 oz. per square yard (131 g/m2 ) plain weave fiberglass fabric.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

From classical man-made fibers to man-made fibers on cellulose base to high performance fibers. Kevlar 840 dtex can be used custom-designed for BAFA®-laid scrims.

Hybrid Carbon / Kevlar® 3210 is a balanced plain weave fabric.

ROVIMAT™ 600P2/450 is a 1068 gsm stitched multi-layer product, comprising a 600 gsm fabric and a 450 gsm glass mat.

DIAGONAP™ DT 20.40.1.01 is a triaxial glass fabric comprising of threestitched plies. It has a total weight of 858 gsm. This reinforcement is primarily used in theMarine industry.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

Applied Sciences Inc. CNF Mat is a continuous nanomaterial sheet good made using low-cost, commercially available materials. It offers one application method of P3 for your product. We work with customers to develop a product that’s custom-designed to achieve the advantages they need. The key properties of CNF Mat are flexibility and durability, which allows reel-to-reel processing methods such as pre-pregging and porosity. It also enables effective infusion with resin.

Hesgon Company Polyester-Glass Heat Shrink Tape 48-72PG is selvage edge tape that is constructed with polyester yarn in the warp direction and fiberglass yarn in the filling direction. Shrinkage will occur in the longitudinal direction in order to have a very tight wrap. Sharp corners and curves can be wound without the tape buckling or puckering and the correct overlap can be maintained since the tape will not shrink in the transverse direction.

HexForce™ 1620 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Goonvean Fibers TEC03CON411 are milled acrylic fibers, also known as random length or ground flocks, are polyacrylonitrile fibers that are widely used to improve the properties of a wide range of industrial products.

SKAPS DB 2400 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

SKAPS T 1800 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC225 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

1165-01: Unidirectional is a 12k Carbon Warp Yarn Fiber with Low Melt Fiberglass fill yarn having a Unidirectional Weave Style

Style 1167 is 3.82 oz. per square yard (129.51 g/m2) plain weave fiberglass fabric.

C-PLY™ BT600 T2,5 50K TRW40 is a 600 gsm biaxial carbon NCF, 0°/90°, 300 gsm/ply. It is made using TRW40 multi compatible resin carbon fiber. Plies are combined using a tricot stitch. This reinforcement is paricularly adpated to the marine industry or parts which are resin infused.

Sylramic™ SiC Fiber, Woven can be readily incorporated into a variety of weaves, woven tapes, braids, etc. A network of U.S. contractors exists to respond to your exact needs. Contact COI Ceramics to discuss specifics and receive further information.

ACM C600B is Multiaxial Carbon Fabrics with Standard fabric width of1270 mm having EP/VE Resin compatibility Multiaxial fabrics are textile materials made of several layers of high-strength composite fibers stitched together with thin threads. Multiaxial fabric can be carbon, glass, basalt, and hybrid according to the source fibers.

Saint-Gobain Vetrotex America EC13-280 TD44C is a Vetrotex Direct Roving is a splice free single end roving made of E-Glass and is suitable for use in various textile technologies.

Teijinconex® Neo Dyeable Fiber is a natural cluster of easily dyeable meta-aramid fibers that add value to protective apparel by enabling excellent dyeability.

Osaka Gas Chemicals SC-243 is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.