Products results

V70SW is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels.Unlike other FDA-compliant fluoroelastomers, V70SW provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F).V70SW can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Key Attributes Excellent steam resistance up to 200°C Superior resistance to a wide range of solvents & chemicals Superior mechanical properties FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients Typical ApplicationsRecommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Ball segment valve seals (inflatable seals)

V71C is a Terpolymer FKM material developed to offer increased efficiency and service life in low temperature applications.V71C extends the operational performance of FKM seals by a full 15°C lower than is possible with well established low temperature FKM grades. It sets a new industry benchmark in low temperature performance.V71C exhibits the same chemical and mechanical properties as B-type and G-type FKM grades.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.Key Attributes With a glass transition of -40°C (-40°F), V71C offers the widest operating temperature range of -51°C to +225°C Low compression set giving excellent seal performance Good elongation properties making fitting easier even at low temperature Excellent resistance to petroleum, oil, silicone and di-ester liquids Typical Applications Valves and pumps in cold (Arctic) operating environments Mechanical seals Flow meters & sensors Seal applications that are exposed to cold situations or high temperature variations.

66% Fluorine copolymers formulated with compounding ingredients approved for food contact (U.S. FDA 21 CFR 177.2600(c)(4)(1) listed). FDA compounds are also available in a variety of colors.

The compound NEXA® PFX 8014 is an excellent chemical resistant Perfluoroelastomer (FFKM). It has been designed for very demanding sealing applications in aggressive chemical environments. PFX 8014 can withstand very aggressive conditions, such as almost all chemical species, hot organic and inorganic acids, alkalis, ketones, esters, alcohols, fuels and water steam up to 200°C.

66% Fluorine copolymers formulated for molding complex geometric shapes. GP compounds exhibit improved hot tear resistant properties and offer a variety of colors.

High fluorine tetrapolymers formulated for low temperature flexibility. HFLT compounds are excellent choices for fuel applications, including methanol-containing fuels, where low temperature flexibility is also essential. The LT compounds are designed for low temperature applications.

The LS compounds are designed to give part shrinkage (out of the mold) and post-curing operation comparable to a nitrile or similar elastomer. In most cases, tooling changes are not required when switching over to an LS compound. NPC indicates no post cure required to achieve high tensile and modulus values with good compression set and aging characteristics. FKHT is a high temperature resistant, low compression set compound. FKX is a high viscosity, high green strength, black fluorocarbon compound formulated for HAV and / or salt bath curing of O-ring cord and extruded profiles.

Whenever FDA standard compliance is required, NEXA has the right solution with its top performance products NEXA® PFX 8030(white), PFX 8025 (black) and PFX 8048 (white), specially developed for SIP (Steam in Place) cleaning and WFI (Water for Injection) systems. They grant superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications. They have a very stable behavior at high australian pokies online free temperatures (PFX 8048 up to 310° C.), allowing the use in critical applications such as Stage II Sterilization processes, where other type of elastomers lose their sealing capabilities.

NEXA® PFX 8090 used for ultra low temperature application. It has excellent Thermal Stability and Chemical Resistance, Anti Explosive Decompression. It is also used in Oil and Gas Applications. PFX 8090 is especially suited for petrochemical and oil&gas applications (AED – Anti Explosive Decompression approved).

Description Perlast® G75TX is the ultimate ‘next generation' perfluoroelastomer, offering a combination of excellent chemical resistance and ultra-high temperature stability, simultaneously extending the operating limits in all aspects.Perlast® G75TX has been formulated to provide increased resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in- service performance in, for example, valves, pumps and mechanical seals.Perlast® G75TX is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2.5m/8ft external diameter) and custom shapes.Key Attributes Very high temperature resistance Ultra low compression set Excellent chemical resistance to a broad range of chemicals Exceptional acid and amine resistance Superior mechanical properties Long-term sealing efficiency at high temperatures Extremely low out-gassing properties Good steam resistance (ASME BPE 2000) Typical Applications Aerospace Chemical Processing Diesel Semiconductor Oil & Gas

66% Fluorine copolymers formulated for the ultimate in compression resistance. SP compounds are the best choice for O-rings.

Perlast® G74S has been specifically developed to cope with a wide range of process media, potent active pharmaceutical ingredients (API's) and aggressive cleaning agents, being especially suited to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels. G74S is also suitable for other critical applications such as Water-For-Injection (WFI) systems.Perlast® G74S can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Perlast® G74S is suitable for both dynamic and static applications and can be molded into O-rings and custom shapes.Key Attributes Excellent chemical resistance to a wide range of chemicals Superior mechanical properties High tensile strength makes G74S ideal for dynamic applications Excellent steam resistance (ASME BPE 2000) FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI <88> and USP <87> compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients (ADI) Typical Applications Dynamic seals Static seals

The LS compounds are designed to give part shrinkage (out of the mold) and post-curing operation comparable to a nitrile or similar elastomer. In most cases, tooling changes are not required when switching over to an LS compound. NPC indicates no post cure required to achieve high tensile and modulus values with good compression set and aging characteristics. FKHT is a high temperature resistant, low compression set compound. FKX is a high viscosity, high green strength, black fluorocarbon compound formulated for HAV and / or salt bath curing of O-ring cord and extruded profiles.

The LS compounds are designed to give part shrinkage (out of the mold) and post-curing operation comparable to a nitrile or similar elastomer. In most cases, tooling changes are not required when switching over to an LS compound. NPC indicates no post cure required to achieve high tensile and modulus values with good compression set and aging characteristics. FKHT is a high temperature resistant, low compression set compound. FKX is a high viscosity, high green strength, black fluorocarbon compound formulated for HAV and / or salt bath curing of O-ring cord and extruded profiles.

Fluoroelastomer Rubber, 75-85 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. Formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA). Water and n-Hexane extraction tested in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600.Excellent oil and heat resistance. For repeated use in equipment associated with the production of foodstuffs intended for human consumption. For use with aqueous or fatty foods.

Kyflon™ 3084 represents a true advancement in perfluoroelastomer chemistry. It offers a combination of very high heat resistance in all conditions including steam up to 300° C.

Kyflon™ 3098 combines excellent low temperature performance with broad chemical resistance and high hardness.

Airex Rubber Products PFR-94 is a compound is a 75-durometer perfluoroelastomer which will resist nearly all chemical reagents, including organic and inorganic acids, alkalines, ketones, esters, alcohols and fuels. At the same time, it offers outstanding high temperature resistance (300 degrees C) which makes it ideal for o-rings, seals, diaphragms and other high quality parts.

Greene FKM 938 is a Fluoroelastomer product. It is available in North America.

66% Fluorine copolymers formulated for low cost. LC-LV compounds are also injection moldable.

66% Fluorine copolymers formulated with compounding ingredients approved for food contact (U.S. FDA 21 CFR 177.2600(c)(4)(1) listed). FDA compounds are also available in a variety of colors.

KRAIBURG FKM is fluoro-rubber used in applications such as seals (shaft ring seals, O-rings, tube applications), petroleum industry: down-hole, hydraulic applications, rollers, fuel lines, coatings and compensators for flue gas scrubbers.

Kyflon™ 3050 provides a highly desirable combination of very broad chemical resistance and excellent physical properties at continuous high temperatures up to 275ºC. Kyflon 3050 exhibits low contamination from extractables.

Description Perlast® G75B offers a unique blend of excellent chemical resistance, mechanical properties and high temperature stability, simultaneously extending the operating limits in all three aspects.Perlast® G75B has been specially formulated to provide increased acid resistance by eliminating fillers that are prone to acid attack and optimizing the polymer structure. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in-service performance in, for example, valves, pumps and mechanical seals.A high modulus makes Perlast® G75B resistant to extrusion and ideal for use in medium-high pressure applications. In addition, the low cumulative compression set provides a high mean-time between maintenance cycles in hot chemically aggressive environments.Perlast® G75B is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2m/6.5ft internal diameter) and custom shapes.Key Attributes Excellent chemical resistance to a wide range of chemicals Exceptional acid and amine resistance Superior mechanical properties Long-term sealing efficiency at high temperature Extremely low out-gassing properties Good steam resistance (ASME BPE 2000) Less than 2% swell in MIL-L-23699C jet oil after 336 hours at 200°C Typical Applications Aerospace Chemical Processing Diesel Semiconductor Oil & Gas

Off-white Fluoroelastomer Rubber, 70-80 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. With additional anti friction agents. Formulated using only those ingredients determined by the United States Food and Drug Administration (FDA) Water and n-Hexane extraction tested in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600. Also complies to the requirements of USP 25, NF20, 2002, Class 6.Excellent resistance to oils, fuels and hydraulic fluids at high temperature.

Chemraz 667 is a Perfluoroelastomer product. It is available in North America. Applications of Chemraz 667 include engineering/industrial parts and sealing applications.Characteristics include: Heat Resistant Low Hardness

Chemraz XRZ is a Perfluoroelastomer product. It is available in North America. Applications of Chemraz XRZ include engineering/industrial parts and sealing applications. Primary characteristic: high purity.

Chengdu Dowhon Industry FD-251C is Excellent flow and mold release.

Perlast® G90A. Perfluoroelastomer 86-90 °IRHD. A black general purpose perfluoroelastomer compound with excellent chemical resistance.Exceptionally high chemical resistance and excellent steam resistance and mechanical properties. Extremely low outgassing properties. Do not use any Perlast® grade with molten alkali metals.

Chemraz SD585 is a Perfluoroelastomer product. It is available in North America. Applications of Chemraz SD585 include engineering/industrial parts, food contact applications, medical/healthcare and sealing applications. Primary characteristic: chemical resistant.

Perlast® ICE G75LT offers a unique combination of excellent chemical resistance and low temperature performance. This perflouroelastomer material has been specifically developed to perform under extreme conditions, in temperatures as low as -46°C (-51°F).Perlast® ICE G75LT has been formulated to provide increased resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in-service performance in valves, pumps and mechanical seals.Ideal for use in exploration and completion applications and equipment operating or stored in sub-zero conditions. Perlast® ICE G75LT is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2.5m/8ft internal diameter) and custom shapes.Key Attributes Excellent low-temperature sealing capability Good high temperature resistance Low compression set Excellent chemical resistance to a broad range of chemicals Exceptional acid and amine resistance Good mechanical properties Typical Applications Aerospace - static O-rings Chemical processing - pumps & valves Mechanical seals Downstream refinery & petrochem equipment Cryogenic equipment Gas storage & transportation Oil & Gas - subsea equipment Completion tools Drilling tools (deepwater) Pipe connectors Pumps, valves & compressors

BDT LB3752 has an excellent mold flow, hot tear resistance, bonding adhesion, good resistance to the fuel containing alcohols.

66% Fluorine copolymers formulated for low cost. LC compounds are used in lathe cut and custom molded goods, including value stem seals.

Kyflon™ 3040 is specifically formulated for low-temperature environments where superior chemical resistance is required.

68% Fluorine terpolymers formulated for improved chemical resistance. IF compounds are good choices for fuel applications.

KRAIBURG FVMQ is a fluoro-silicone is used in applications such as special seals for the automotive and aeronautics industry with fuel contact, which require excellent low temperature properties.