Products results

PETOL 56-2 is a high purity polyoxypropylene glycol, 2000 molecular weight. PETOL 56-2 is a diol homopolymer and the product is not acidified.

Puranol G 303 is synthesized with propylene glycol, glycerin, and epoxide. It is used in polyurethane elastomers, adhesives, coatings, waterproof coatings, chemical grouting materials, shoe soles, and non-cellular polyurethane applications such as coating, adhesives, sealants and elastomers.

Protactinium Chemical NASM -1007 is a waterborne polyester polyol (7% dimethyl-5-sodiosulfoisophthalate (SIPM)). Suitable for water dilutable polyurethane (PU) and two-component (2K) systems.

Polem A is a branched, castor oil-based polyol emulsion.

ELAPOL 11117 B is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aromatic, aliphatic acid and diethylene glycol (DEG).

POLURCAST PE95A01 is a aromatic prepolymer.

Caffaro Industrie S.p.A. Ravecarb 107 is a aliphatic polycarbonate glycol used as intermediate for the production of high performances POLYURETHANES (PUR).

TRI-REZ® 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane coatings and elastomers that require excellent UV and chemical resistance properties.

TRI-REZ® Polyol 1030-60 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1030- 60 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

NIPPOLLAN N-966 is newly developed polycarbonate diol (PCD) with added flexibility to the initial versions of NPU’s PCD (NIPPOLLAN 980, 981) products. NPU’s initial PCD products possessed high durability and stiffness due to its straight aliphatic carbonate chain structure, and have been widely applied in synthetic leather and various other applications. However, the lack of flexibility was one of its disadvantages. Therefore, a new series of PCD were developed which possessed the same durability but also with added flexibility property.

Protactinium Chemical DMS -3078 is a waterborne polyester polyol (7.8% dimethyl-5-sodiosulfoisophthalate (DMSIP)). Suitable for water dilutable polyurethane (PU) and two-component (2K) systems.

Puranol D 204 is synthesized with propylene glycol, glycerin, and epoxide. It is used in polyurethane elastomers, adhesives, coatings, waterproof coatings, chemical grouting materials, shoe soles, and non-cellular polyurethane applications such as coating, adhesives, sealants and elastomers.

Bakelite® PF 6292 LA resins serve as excellent crosslinking agents for epoxy, polyester, alkyd and other resin systems to form coatings with good adhesion and chemical resistance properties. Crosslinking takes place either under high temperature (-180°C) or via acid catalysts. They are used with epoxy and polyester resins to produce chemically resistant coatings for food contact and anti-corrosion coatings.

UCOPOL M 602 is a polyurethane primer to be used as highly reactive impregnating and dust binder for absorbent concrete substrates.

NJ 219A can be used to produce coatings, adhesives, sealants, elastomers, etc.

Polyol-32 is a Polyester Polyol based on Glycerin and Phthalic Anhydride.

CARPOL® PGP-3815 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 3800. This diol is a copolymer of propylene oxide and ethylene oxide. Main applications include C.A.S.E., however, Carpol® PGP-3815 may also be included as a component in other urethane products and formulations.

Polem A MC is a two component, clear aliphatic polyurethane coating. It provides excellent abrasion resistance, improved scratch resistance and a clear, mat finish.

ELAPOL 6510 B by Elachem is a linear, saturated polyester polyol. It contains aliphatic acid, 1,6-hexanediol and (NPG) neo-pentyl glycol.

Bakelite® PF 9640 LG resins serve as excellent crosslinking agents for epoxy, polyester, alkyd and other resin systems to form coatings with good adhesion and chemical resistance properties. Crosslinking takes place either under high temperature (-180°C) or via acid catalysts. They are used with epoxy and polyester resins to produce chemically resistant coatings for food contact and anti-corrosion coatings.

CARPOL® PGP-400 is a propylene glycol initiated polyether polyol. The resulting material has a nominal functionality of two and a molecular weight of 400. The low functionality and viscosity of this polyol makes for a versatile product. It may be used in rigid foam systems to the lower viscosity of b-side material while helping control crosslinking. In addition, it may also be utilized in a number of C.A.S.E. applications. Carpol® PGP-400 is polymerized solely with propylene oxide for controlled reactivity.

Jurong Ningwu New Material Development NJ-ED28 can be used to produce coatings, adhesives, sealants, elastomers, etc.

Puranol G 306 is synthesized with propylene glycol, glycerin, and epoxide. It is used in polyurethane elastomers, adhesives, coatings, waterproof coatings, chemical grouting materials, shoe soles, and non-cellular polyurethane applications such as coating, adhesives, sealants and elastomers.

CA - 2410 is Applied In Adhesives, PU Resins,Elastomer, PU Elastomer Fiber.

Protactinium Chemical NAS -1008 is a waterborne polyester polyol (8% sodiosulfoisophthalic acid (Na-SIPA)). Suitable for water dilutable polyurethane (PU) and two-component (2K) systems.

Merginol 908 is a polyol based on vegetable oil with primary and secondary hydroxyl groups. The renewable content is very high.

UCOPOL M 2851 is recommended for Adhesion, coating for parquet, metal and plastic.

Bakelite® PF 9900 LB resins serve as excellent crosslinking agents for epoxy, polyester, alkyd and other resin systems to form coatings with good adhesion and chemical resistance properties. Crosslinking takes place either under high temperature (-180°C) or via acid catalysts. They are used with epoxy and polyester resins to produce chemically resistant coatings for food contact and anti-corrosion coatings.

Changshu Yitong Polyurethane Product YT-204 is case polyether polyols that is used in PU adhesives.

Polem A 1140 is a branched, castor oil-based polyol.

BLUEPUR 3038 is a aliphatic-aromatic isocyanurate.

NIPPOLLAN N-963 is newly developed polycarbonate diol (PCD) with added flexibility to the initial versions of NPU’s PCD (NIPPOLLAN 980, 981) products. NPU’s initial PCD products possessed high durability and stiffness due to its straight aliphatic carbonate chain structure, and have been widely applied in synthetic leather and various other applications. However, the lack of flexibility was one of its disadvantages. Therefore, a new series of PCD were developed which possessed the same durability but also with added flexibility property.

Rokopol® F3600 is a polyether polyol, a block/statistical copolymer of ethylene oxide and propylene oxide based on glycerine. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 45–50 mgKOH/g, and dynamic viscosity within the range of 540-620 mPas.

CARPOL® PGP-2000 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 2000. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® PGP-2000 may also be included as a component in other urethane products and formulations.

ELAPOL 5420 A is an aliphatic, saturated polyester polyol by Elachem.It contains 1,4-butanediol and mono-ethylene glycol.

PETOL 250-3 is a polyoxypropylene triol, 670-average molecular weight. This polyether triol is used in the manufacture of rigid, semi-rigid and special flexible polyurethane foams. If blended with other PETOL polyols, it can vary physical and mechanical characteristics of semi-rigid and rigid polyurethane foams. The product is also used in blends for applications used in the production of coatings, adhesives and casting elastomers.