Products results

POM-I, POM copolymer unreinforced, medium viscosity, impact modified

Sylvin Technologies Sylvin™ 9684-80 Clear 8159 is a vinyl compound formulated with a non ortho phthalate plasticizer for applications that require an alternative to DOP/DEHP plasticizer. This compound is suitable for extrusion or injection molding applications.

MAST Technologies MR21-0012-20 is a thin magnetically loaded sheet stock with loss at microwave frequencies while retaining the desirable properties of elastomeric binders. Cavity Resonance Absorbers are designed to have a high loss and are intended to be applied to metal surfaces inside microwave cavities to reduce the cavity's Q. Cavity Resonance Absorbers attenuate energy at normal and high angles of incidence at frequencies ranging from 1 GHz to 20 GHz. The most common elastomer is silicone, but other elastomer formulations are available.

APARPRENE® TPV 060 AB M permits fabrication of rubber-like articles with speed, efficiency and economy in injection molding, extrusion and blow molding to create durable and long-lasting parts. It is a specialty grade. TPV products are highly preferred in the automotive, electrical, home appliance, construction and healthcare industries.

TRIBIT® 1500GN30 is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Flame Retardant

Sylvin™ 9067-70 White 1275 is a vinyl compound formulated for injection molding applications. This compound has a underwriters labratories listing as a recognized component.

Outline: FZ-1130-D5 is a glass fiber 30% reinforced polyphenylene sulfide compound with reduced flash and improved flexibility compared to conventional grades. Color: Black and Natural (Brown).

Sylvin Technologies Sylvin™ 9077-85 LMW Blue 8213 is a vinyl compound formulated for injection molding applications. This compound has a underwriters laboratories listing as a recognized component.

Sylvin Technologies Sylvin™ 916VO-85 Gray 9661 is a thermoplastic compound formulated for electrical injection molding applications. This compound has a underwriters laboratories listing as a recognized component for all colors.

MICAM’s CG-10 is an excellent mechanical and electrical epoxide copper clad laminate

Glass fiber reinforced grades-30% Glass fiber, Frictional wear resistant grade

Sylvin Technologies Sylvin™ 7844-92 White 1434 is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain relief. This compound has a underwriters laboratories listing as a recognized component.

Haiplen™ H50 C7 by Taro Plast is comprised of Polypropylene (unspecified). It is commonly used Haiplen™ H50 C7 is certified as UL Flame Rated. It is available in Pellets form.

Pentamid AB GV15 H RC black is a normal viscosity, heat stabilized polyamide 66+6, 15% glass fiber reinforced, recompound.

LONGHUA PC 836 having velvet – fine matte Film texture is a textured film, translucent, very matt appearance on suede film side

KEBATRON C 1065X1 is a cross-linked and reinforced design with 65% fiberglass or mineral filler.

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

It is flame retarded polyamide 6 compound, halogen and phosphorous free, good electrical properties. ISO 1874-1: PA 6, MFR, 14-030

TPE-S, Shore A75, modified for good adhesion to polycarbonate

Glass Sphere Reinforced Nylon Resin (PA66)

Nylene Recommended for molding applications requiring both maximum durability and toughness Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle

Pentamid A GV35 H natural is a normal viscosity, heat stabilized polyamide 66, 35% glass fiber reinforced.

RIGIDDI-PAK R-4525 SeriesA general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained.

Sylvin Technologies Sylvin™ 916VO Brown 7415 is a thermoplastic compound formulated for electrical injection molding applications. This compound has a underwriters laboratories listing as a recognized component for all colors.

PETG (Polyethylene Terephthalate Glycol Comonomer) 3D Printing Filament. PETG - 1 kg benefits include Great impact resistance, Natural color is very clear, Excellent chemical resistance for a clear plastic, Perfect for applications that require high durability and clarity.

BDT H3651 has an excellent mold flow, mold release, good resistance to the fuel containing alcohols.

Sylvin™ 7833-85 Pink 6307 is a vinyl compound formulated for electrical molding applications. This compound is ul 94-hb listed.

PP Copolymer White

Sylvin™ 7403-90 Natural is an alloy compound formulated for electrical molding applications that require bondability to other materials.

Sylvin™ 7833-80 Black 294 is a vinyl compound formulated for electrical molding applications. This compound is ul 94-hb listed.

TRIBIT® 1503S is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Sylvin™ 7833-90 Brown 7152 is a vinyl compound formulated for electrical molding applications.

Sylvin Technologies Sylvin™ 7844-85C Black is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.