Products results

PL-150 is oligo [ 2-hydroxy-2-methyl-1-[ 4-(1-methylvinyl) phenyl] propanone] and 2-Hydroxy-2-methyl-1-phenyl-1-propanone. It is a very fast curing type-I photoinitiator soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

JRCure-1116 is brown powder in appearance.

JRCure-1106 is pale yellow solid in appearance.

REDIVERS® 300 UV Additive 0107 is a photoinitiator, which is added to RESUCAT Cationic UV curing inks of the series 210-8K and 210-23K, in order to boost curing under conditions where the regular curing of the ink is not sufficient. It will react fully with the other ink components and additions are therefore considered an integrated part of the RESUCAT inks.

Omnirad EMK is a bimolecular photoinitiator, suitable for UV-polymerisation of mono- or multifunctional (meth)acrylates.

Omnirad BCIM is a versatile highly effective photoinitiator for UV polymerisation of mono- or multifunctional (acrylate-) monomers.

Omnirad 819 is a versatile photoinitiator for radical polymerization of unsaturated resins upon UV light exposure. It is especially suitable for white pigmented Formulations, the curing of glass-fiber-reinforced polyester/styrene systems and for clear coats for outdoor use in combinations with light stabilizers. Thick section curing is also possible with this photoinitiator.

Simon Quimica Acelerante Barcoch is an additive used to reduce the curing time of the coating to 3 - 4 hours with the purpose of applying and polishing the finish same day.

PL-TZT is a fast curing type-II photoinitiator. In the presence of O2, the use of an amine co-initiator is recommended. It is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

JRCure-1056 is white crystalline in appearance.

Omnirad BDK is a highly efficient, type I photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light. It can be used in combination with mono or multi-functional monomers as reactive diluents.

Ethyl-4-dimethylamino benzoate is a tertiary amine synergist typically used in combination with type II photoinitiators such as Benzophenone. It is best known for it’s ability to promote surface cure. It is soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PCC Chemax DME Aerosol is an organic compound from the group of ethers. It is a colorless gas with a characteristic odor, moderately soluble in water. The product in aerosol is used as a propellant (factor for discharging content). It is used instead of the previously applied CFCs, as it has no harmful effect on the ozone layer. The product is therefore environmentally friendly. DME in the aerosol present in a concentration of not less than 99.99%. It is produced in the dehydration of methanol followed by DME rectification.

Photosensitizer

Tellurium (IV) Diethyldithiocarbamate it is used as a vulcanization accelerator for natural rubber, diene synthetic rubber, butyl rubber and EPDM rubber; especially applicable to butyl rubber, with short vulcanization time; usually used together with an azo vulcanization accelerator; applicable to preparing air bags, hoses, tires & cables.

Omnirad 500 is a highly effective liquid photoinitiator, used for UV-polymerisation of suitable resins. The low viscosity allows lower of the viscosity of the total formulation. Well suited for water-based formulation.

PL-605 is a liquid photoinitiator compound developed specifically for thick clear UV and LED curable coatings and gels.

Photosensitizer

Esacure 1001 M is a difunctional Type II photoinitiator of the ketosulphone class. It is used to initiate radical polymerisation of unsaturated oligomers e.g. acrylates after UV exposure.

1-hydroxy-cyclohexylphenyl-ketone is a fast curing type-I photoinitiator. It is soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

Spectra Group Limited H-Nu 815 can cure a wide range of acrylate resins via free-radical mechanism. It is a commercial photoinitiator with a broad absorbance range of 690 nm to 850 nm (λmax = 828nm in DMSO).

4-Methyl benzophenone is a fast curing type-II photoinitiator. In the presence of O2, the use of an amine co-initiator is recommended. It is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

FASCAT® 2003 is a pale yellow liquid, with is used extensively for producing urethanes from the reaction of isocyanates and polyols.

Altakem HD725 is a unique novel reactive complex catalyst and reactive diluent designed for decorative alkyd enamels.

Omnirad BP Flakes is a highly effective Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

Omnicat 445 is a low odor, benzene free iodonium hexafluorophosphate salt for cationic curing of epoxy, oxetane, and vinyl ether formulations.

JRCure-1118 is pale yellow solid in appearance.

Omnirad 784 is a reactive orange colored solid photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to visible light or UV light. It can be used as the sole initiator or in combination with other initiators and mono or multifunctional monomers as reactive diluents. Omnirad 784 shows photobleaching properties and can be used in both clear and pigmented systems.

Lithium Acetate Dihydrate is widely utilized as a precursor for pharmaceuticals, in the production of antistatic fibers, buffer for gel electrophoresis of DNA and RNA, catalyst for textiles manufacturing, PVC stabilizer, yeast transformer, polymerization catalyst and key precursor material for lithium batteries.

Photosensitizer

FASCAT® 4100 is a amorphous white solid with several esterification uses. It is an extremely pure butylstannoic acid, offering industry leading low levels of dibutyltin and tributyltin species.

Omnirad 127 D is a highly efficient Type I Photoinitiator that may be used to initiate the photo polymerization of unsaturated pre-polymers like acrylates – in combination with mono- or multifunctional monomers. Omnirad 127 D is especially suitable for all types of pigmented UV inks (offset, screen, flexo and inkjet) and clear coatings, particularly in thin coatings (such as overprint varnishes) but also in a variety of coating applications.

Esacure ONE is a difunctional alpha-hydroxy ketone photoinitiator. It is a highly reactive difunctional photoinitiator particularly suitable for clear systems. Due to its molecular structure it is particularly suitable for all systems where low VOC, low migration and low extraction values are needed (food packaging).

Esacure KT 55 is a liquid mixture of Esacure TZT (50%) and Esacure KIP 150 (50%). IT is used in combination with a co initiator and is particularly suitable when high reactivity and low yellowing are required.

JRCure-1113 is white crystalline powder in appearance.

Spectra Group Limited H-Nu 640MP can cure a wide range of acrylate resins via free-radical mechanism. It is a commercial photoinitiator with a broad absorbance range of 570 nm to 670 nm (λmax = 649nm in DMSO).