Products

Andisil® OH 50,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® MV 2,000 polymer is a partially mono-functional vinyl polymer to reduce the durometer of the RTV formulation with minimal bleeding of fluid from the cured material. It may slow the curing of the RTV, but with the use of a faster platinum catalyst, it will help give a good normal cure.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® OH 750 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® OH 20,000 is a Silanol terminated fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® OH 40 is a Low viscosity 3.5% silanol fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Filled Silicone Vinyl-terminated Compound

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® EM 100C Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 1,000 Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 350C Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 60,000C Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 1,000C Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 10,000C Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 12,500C Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 350 Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 10,000 Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 12,500 Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® OH 80,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® OH 30 is a Low viscosity 6% silanol fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® EM 7060 is a non-ionic, 60% emulsion of silanol terminated polydimethylsiloxane. It is easily diluted by adding water with mild agitation. It can be used as a release agent in the following applications.Shell Core, Plastics, Asphalt, Metals

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® OH 1,000 is a Silanol terminated fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.

Andisil® OH 4,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® OH 6,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® SF are a series of silicone fluids with various viscosities and of excellent purity. They are chemically known as dimethyl polysiloxane and useful due to their thermal stability or resistance to change with changes in temperature. The fluids are completely soluble in all viscosities of dimethyl polysiloxane fluids and are heat stable and resistant to oxidation. They are inert, noncorrosive, nontoxic, clear and colorless.