Products

Airdraw Airdraw 2 is embossed with a ''cracked ice'' pattern which allows for rapid air removal when placed under vacuum. The film has been formulated to provide increased stiffness to assist in maintaining a breathable pattern. Airdraw 2 is not affected by environmental conditions and will not soften in high humidity, allowing superior breathability. It is designed primarily for ply compaction with the added benefits of not requiring a breather. It is embossed from one side of the film, under close examination; the film has a flat side and a raised side. The outer surface of the roll is the raised side. For best results, place the raised side against the part surface on top of a perforated release film.

Airdraw® Airdraw 2-DC is embossed with a diamond channel pattern which has been engineered specifically to provide rapid air removal from under the bag when vacuum is drawn. Airdraw 2-DC uses the original Airdraw 2 film which has been formulated to provide increased stiffness to assist in maintaining a breathable pattern, and is a contact material on some specifications. Airdraw 2-DC is not affected by environmental conditions and will not soften in high humidity and maintains the structure of the breathing channels for superior performance. It is designed primarily for ply compaction, with the benefit of not requiring a breather. It is embossed from one side of the film and under close examination the film has a flat side and a side with diamond shaped blisters. The blisters go against the part surface on top of a perforated release film.