Products

Anhui Kingcham Chemical Technology M-21 is suitable for above 3%@60°gloss in polyester epoxy hybrid powder coatings. M-21 contains little wax, stable and good matting properties and repeat extrusion performance.

Anhui Kingcham Chemical Technology KC9700 is a kind of modified micronized wax. To reduce the surface tension, to reduce pinholes and air bubbles happen on porous substrates. Especially for cast iron, cast aluminum, galvanized sheet, and aluminum alloy substrate it has outstanding defoaming effect. KC9700 suit for Polyester/β-HAA, Polyester/TGIC, Polyester/Epoxy, and Acrylic powder system.

Anhui Kingcham Chemical Technology KC552 pure polyester curing agent composited of β-hydroxyalkyl amides. It is the excellent curing agent of the pure polyester weather resistance powder coating, and it can also be used as curing agent for indoors carboxyl polyester, and the coating has a good performance. This product is a substitute for TGIC curing agent, with non-toxic, non-irritating to the skin, fast curing and other advantages. This product has excellent outdoor performance and it is the real environment-friendly products.

Anhui Kingcham Chemical Technology KC961 is a modified micronized wax, the porous substrate of the coating can be achieved very good results. It enables the release of air bubbles in the substrate easily detached, and generate the coating surface without air bubbles, especially for cast iron, galvanized and aluminum substrates , and it has a very good degassing effect. It can be replaced BYK chemical CERAFLOUR® 961. It is suitable for polyester / hydroxyalkylamide, polyester / TGIC, polyester / epoxy, acrylic, and other powder coatings.

Anhui Kingcham Chemical Technology M-30 is suitable for above 10%@60°gloss in polyester epoxy hybrid powder coatings. M-30 contains little wax, stable and good matting properties and repeat extrusion performance.

Anhui Kingcham Chemical Technology KC5230 is a specific onium salt catalyst, it could be used as carboxyl group-containing polyester resin inner-catalyst or the curing accelerator to reduce the curing temperature or curing time of powder coatings.

Anhui Kingcham Chemical Technology TGIC is a heteropolycyclic oxides, with good heat resistance, weather resistance, adhesiveness and excellent high temperature resistance properties. It is mainly used as curing agents of powder coatings such as carboxyl polyester and carboxyl acrylic resin. High purity TGIC can be used to make electrical insulating laminates, adhesives, plastics stabilizers and so on.

Anhui Kingcham Chemical Technology KC9500 is a synthetic microcrystalline wax.This product has good foaming degassing effects and yellowing resistance. It is a defoamer that have a high performance, Also it is used as a substituendum of benzoin, and it is used in powder coatings to improve surface defects such as eliminate shrinkage and yellowing, also it applies to porous surfaces of the casting iron and other multihole surface degassing.