Ceramabind

Ceramabind™ 542 is an acidic, etching solution that is ideal for use in adhesive systems for bonding non-porous ceramics and glass. Stable when mixed with copper. Reacts with bases such as carbonates, oxides and hydroxides of alkali metals.

Ceramabind™ 642 is a basic solution that is highly compatible with most ceramic and metal powders. Good wettability and tack, and excellent acid resistance after curing. Extremely moisture resistant after a high-temperature cure. Sets up in thick cross-sections when properly formulated.

Ceramabind™ 643-1 is a basic solution compatible with most ceramic and metal powders. Excellent binder for producing high-temperature protective coatings and refractory and chemically resistant adhesives and patching materials. Fully cures at low temperatures and sets up in thick cross-sections when properly formulated.

Ceramabind™ 643-2 has excellent for formulating thin coatings that are set at room temperature and can be raised rapidly to high temperatures.

Ceramabind™ 644-A is an acidic, colloidal alumina binder developed for mixing with sized refractory flours and grains to produce high-temperature refractory coatings for ceramic fiberboards. Used as a superior standalone system to rigidize refractory fiber shapes.

Ceramabind™ 644-S is a colloidal silica aqueous solution that produces high adhesive strength. Ideal for blending with all types of granular and fibrous ceramics. Excellent resistance to temperature, moisture and mechanical shock.

Ceramabind™ 830 is a basic solution compatible with most oxide and metal powders. Ideal for formulating high pigment-to-binder ratios to produce dense adhesives and coatings. Sets at room temperature to a moisture-resistant film and do not require a heat cure. Use only for thin coating systems less than 1 mil thick.

Ceramabind™ 875 is an acidic powdered binder system used to formulate high-strength, hydraulic-setting cements for electrical potting or molding applications. A powder blend is typically formulated by adding one part binder to four parts filler by weight. Water is then added in a ratio of 15–20 parts to 100 parts powder blend by weight.

Ceramabind™ 880 is a high-temperature, water-dispersible silicone resin for producing corrosion and moisture resistant coatings and sealing porous ceramics.