Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Mixing & Application
- Liquid binder-to-powder weight ratios of 4:1 to 1:1 are recommended when formulating adhesives, coatings and pastes.
- Powder binder (875) to filler ratio of 1:4 is recommended.
- Blend powder slowly into binder until desired viscosity is achieved.
- Vacuum degas as required to reduce entrapped air.
- Apply the mixture to clean surfaces.
- Extremely smooth surfaces are difficult to wet and should be sandblasted, etched, or slightly oxidized wherever possible.
- Porous substrates tend to absorb and separate the binder from the powder; these substrates should be pre-coated with the binder only before applying the mixture.
- Curing
- Air dry at room temperature for 1 - 2 hours.
- Final cure at 450ºF for 1 hour or 480ºF for 45 minutes.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| pH Value | 6.5 | — | — |
| Density | 1.04 | g/cc | — |
| Viscosity | 480.0 | cP | — |
| Solids Content by Weight | 50.0 | % | — |
| Temperature Resistance | 1200.0 | ºF | — |
Technical Details & Test Data
- Ceramabind™ Compatibility Chart
Product Ceramabind™ 880 Aluminum Stable Aluminum Oxide Stable Aluminum Nitride Stable Boron Nitride Stable Brass Stable Bronze Stable Chromium Stable Cobalt Stable Copper Stable Dolomite Stable Inconel Stable Indium Stable Indium Oxide Stable Invar Stable Iron Stable Iron Oxide Stable Magnesium Oxide Stable Manganese Dioxide Stable Mica Stable Molybdenum Stable Mullite Stable Neodymium Oxide Stable Nickel Stable Nichrome Stable Sillicon Dioxide Stable Sillicon Stable Sillicon Carbide Stable Stainless Steel Stable Tantalum Stable Titanium Stable Titanium Diboride Stable Titanium Dioxide Stable Zinc Stable Zirconium Carbide Stable Zirconium Diboride Stable Zirconium Oxide Stable Zirconium Silicate Stable
Safety & Health
- Safety
- All Ceramabind™ products are water-based materials that can be washed from the skin, in the uncured state, with mild soap and warm water.
- Prolonged skin contact should be avoided to prevent irritation.
- If any material contacts the eyes, flush continuously with water or neutralizing solutions, then consult a physician immediately.
Storage & Handling
- Storage
- Storage Unopened containers have a six-month shelf life when stored at room temperature.
- Make sure opened containers are capped securely to prevent evaporation.
- Place a plastic film in between the cap and container to prevent air leakage.
- Store containers between 45ºF and 95ºF.