Knowde Enhanced TDS
Identification & Functionality
- Carrier
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Applications
- Mixing & Application
- Liquid binder-to-powder weight ratios of 4:1 to 1:1 are recommended when formulating adhesives, coatings and pastes.
- Powder binder (875) to filler ratio of 1:4 is recommended.
- Blend powder slowly into binder until desired viscosity is achieved.
- Vacuum degas as required to reduce entrapped air.
- Apply the mixture to clean surfaces.
- Extremely smooth surfaces are difficult to wet and should be sandblasted, etched, or slightly oxidized wherever possible.
- Porous substrates tend to absorb and separate the binder from the powder; these substrates should be pre-coated with the binder only before applying the mixture.
- Curing
- Air dry at room temperature for 1 - 2 hours.
- Heat cure at 200ºF for 1 - 2 hours.
- Heat cure at 500ºF for 1 - 2 hours.
- Final cure at 700ºF for 1 hour for maximum adhesive strength and moisture resistance.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| pH Value | 2.5 | — | — |
| Density | 1.47 | g/cc | — |
| Viscosity | 50.0 | cP | — |
| Solids Content by Weight | 40.0 | % | — |
| Temperature Resistance | 3200.0 | ºF | — |
Technical Details & Test Data
- Ceramabind™ Compatibility Chart
Product Ceramabind™ 542 Aluminum Reacts Aluminum Oxide Stable Aluminum Nitride Reacts Boron Nitride Stable Brass Stable Bronze Stable Chromium Reacts Cobalt Reacts Copper Stable Dolomite Stable Inconel Stable Indium Stable Indium Oxide Stable Invar Stable Iron Reacts Iron Oxide Reacts Magnesium Oxide Reacts Manganese Dioxide Stable Mica Stable Molybdenum Reacts Mullite Stable Neodymium Oxide Reacts Nickel Reacts Nichrome Stable Sillicon Dioxide Stable Sillicon Stable Sillicon Carbide Reacts Stainless Steel Reacts Tantalum Reacts Titanium Reacts Titanium Diboride Reacts Titanium Dioxide Stable Zinc Stable Zirconium Carbide Reacts Zirconium Diboride Reacts Zirconium Oxide Stable Zirconium Silicate Stable
Safety & Health
- Safety
- All Ceramabind™ products are water-based materials that can be washed from the skin, in the uncured state, with mild soap and warm water.
- Prolonged skin contact should be avoided to prevent irritation.
- If any material contacts the eyes, flush continuously with water or neutralizing solutions, then consult a physician immediately.
Storage & Handling
- Storage
- Storage Unopened containers have a six-month shelf life when stored at room temperature.
- Make sure opened containers are capped securely to prevent evaporation.
- Place a plastic film in between the cap and container to prevent air leakage.
- Store containers between 45ºF and 95ºF.