Products

Arlon 25N and 25FR are woven fiberglass reinforced, ceramic-filled composite materials engineered for use in microwave and RF multilayer printed circuit boards. Combining a non-polar thermoset resin system with a controlled-expansion ceramic filler, 25N and 25FR offer low dielectric constant and loss combined with a low Thermal Coefficient of Dielectric Constant (TCEr) for signal stability over a wide ambient temperature range. Designed for use in multilayer packages, 25N and 25FR offer prepregs that are identical in chemical composition and physical properties with their copper clad laminates for a completely homogeneous finished package for optimal signal integrity.The low dielectric constant (Er) and loss properties, low thermal coefficient of dielectric constant (TCEr), and excellent physical stability characteristics offered by 25N and 25FR materials make them ideal for wireless and digital applications, such as cellular telephones, down converters, low noise amplifiers, antennas and other advanced des ign circuits.Processing for 25N and 25FR materials is consistent with processing for standard high temperature thermoset based printed circuit board substrates.

Arlon's AD Series is a group of woven fiberglass-reinforced PTFE composite materials designed for use as printed circuit board substrates. These materials combine the excellent low loss electrical properties of PTFE resin with the enhanced value of costeffective heavier fiberglass styles to provide low cost laminate materials suitable for high volume commercial wireless communication applications.The AD Series is currently available in a limited combination of dielectric thickness (0.015" - 0.062") and dielectric constant (2.5 - 3.5). Thicker dielectrics can be developed to meet customer requirements. The higher weight ratio of fiberglass to PTFE resin yields laminates with greater dimensional stability than is normally expected of PTFE-based substrates.Stability of PTFE over a wide frequency range and low loss makes AD Series materials ideal for a variety of microwave and R/F applications in telecom industry. AD Series laminate materials may be processed with standard PTFE materials. Because there is a relatively higher percentage of fiberglass, thermal expansion is reduced in all directions, improving plated through hole reliability.

Arlon's AD Series is a group of woven fiberglass-reinforced PTFE composite materials designed for use as printed circuit board substrates. These materials combine the excellent low loss electrical properties of PTFE resin with the enhanced value of costeffective heavier fiberglass styles to provide low cost laminate materials suitable for high volume commercial wireless communication applications.The AD Series is currently available in a limited combination of dielectric thickness (0.015" - 0.062") and dielectric constant (2.5 - 3.5). Thicker dielectrics can be developed to meet customer requirements. The higher weight ratio of fiberglass to PTFE resin yields laminates with greater dimensional stability than is normally expected of PTFE-based substrates.Stability of PTFE over a wide frequency range and low loss makes AD Series materials ideal for a variety of microwave and R/F applications in telecom industry. AD Series laminate materials may be processed with standard PTFE materials. Because there is a relatively higher percentage of fiberglass, thermal expansion is reduced in all directions, improving plated through hole reliability.

Arlon's AD Series is a group of woven fiberglass-reinforced PTFE composite materials designed for use as printed circuit board substrates. These materials combine the excellent low loss electrical properties of PTFE resin with the enhanced value of costeffective heavier fiberglass styles to provide low cost laminate materials suitable for high volume commercial wireless communication applications.The AD Series is currently available in a limited combination of dielectric thickness (0.015" - 0.062") and dielectric constant (2.5 - 3.5). Thicker dielectrics can be developed to meet customer requirements. The higher weight ratio of fiberglass to PTFE resin yields laminates with greater dimensional stability than is normally expected of PTFE-based substrates.Stability of PTFE over a wide frequency range and low loss makes AD Series materials ideal for a variety of microwave and R/F applications in telecom industry. AD Series laminate materials may be processed with standard PTFE materials. Because there is a relatively higher percentage of fiberglass, thermal expansion is reduced in all directions, improving plated through hole reliability.

49N is a low-flow epoxy prepreg engineered for bonding multilayer epoxy rigid-flex or attaching heatsinks to multilayer epoxy PCBs. With a high Tg, the prepreg can be used in high-performance or hightemperature applications compared to a standard difunctional epoxy low-flow.

Arlon's AD Series is a group of woven fiberglass-reinforced PTFE composite materials designed for use as printed circuit board substrates. These materials combine the excellent low loss electrical properties of PTFE resin with the enhanced value of costeffective heavier fiberglass styles to provide low cost laminate materials suitable for high volume commercial wireless communication applications.The AD Series is currently available in a limited combination of dielectric thickness (0.015" - 0.062") and dielectric constant (2.5 - 3.5). Thicker dielectrics can be developed to meet customer requirements. The higher weight ratio of fiberglass to PTFE resin yields laminates with greater dimensional stability than is normally expected of PTFE-based substrates.Stability of PTFE over a wide frequency range and low loss makes AD Series materials ideal for a variety of microwave and R/F applications in telecom industry. AD Series laminate materials may be processed with standard PTFE materials. Because there is a relatively higher percentage of fiberglass, thermal expansion is reduced in all directions, improving plated through hole reliability.

Arlon's AD Series is a group of woven fiberglass-reinforced PTFE composite materials designed for use as printed circuit board substrates. These materials combine the excellent low loss electrical properties of PTFE resin with the enhanced value of costeffective heavier fiberglass styles to provide low cost laminate materials suitable for high volume commercial wireless communication applications.The AD Series is currently available in a limited combination of dielectric thickness (0.015" - 0.062") and dielectric constant (2.5 - 3.5). Thicker dielectrics can be developed to meet customer requirements. The higher weight ratio of fiberglass to PTFE resin yields laminates with greater dimensional stability than is normally expected of PTFE-based substrates.Stability of PTFE over a wide frequency range and low loss makes AD Series materials ideal for a variety of microwave and R/F applications in telecom industry. AD Series laminate materials may be processed with standard PTFE materials. Because there is a relatively higher percentage of fiberglass, thermal expansion is reduced in all directions, improving plated through hole reliability.

Arlon 45N is a tough, high Tg (175°C by DSC) multifunctional epoxy laminate and prepreg system designed for use in a variety of higher layer count MLB's. Processeable using conventional FR-4 conditions, 45N is supplied to meet the requirements of IPC-4101/24.

47N is a low-flow epoxy prepreg engineered for binding multilayer epoxy rigid-flex or attaching heatsinks to multilayer PCBs. An optional low lamination temperature protects components already mounted on the PCB.

Arlon's AD Series is a group of woven fiberglass-reinforced PTFE composite materials designed for use as printed circuit board substrates. These materials combine the excellent low loss electrical properties of PTFE resin with the enhanced value of costeffective heavier fiberglass styles to provide low cost laminate materials suitable for high volume commercial wireless communication applications.The AD Series is currently available in a limited combination of dielectric thickness (0.015" - 0.062") and dielectric constant (2.5 - 3.5). Thicker dielectrics can be developed to meet customer requirements. The higher weight ratio of fiberglass to PTFE resin yields laminates with greater dimensional stability than is normally expected of PTFE-based substrates.Stability of PTFE over a wide frequency range and low loss makes AD Series materials ideal for a variety of microwave and R/F applications in telecom industry. AD Series laminate materials may be processed with standard PTFE materials. Because there is a relatively higher percentage of fiberglass, thermal expansion is reduced in all directions, improving plated through hole reliability.

Arlon 44N is a high resin content multifunctional (175°C) epoxy prepreg system with a proprietary micordisperse ceramic filler system. 44N is engineered for the filling of clearance holes in thin Metal cores such as 0.006" Copperinvar- Copper or via holes in sequentially laminated MLB designs. Based on Arlon's 45N, the 44N system is compatible with conventional epoxy lamination and fabrication.

51N is a non-DICY multifunctional epoxy low-flow prepreg system designed to provide high reliability through lead-free solder operations. The high decomposition temperature and high thermal stability of this material is ideal for use in complex rigid-flex fabrication and assembly operations where minimum resin flow is required.