Products

avanSTATIC SBR/EPDM is a very diverse material, with many different applications and formulas, so the additive and the amount needed vary greatly depending on the type of rubber, formula, polarity of the mixture, etc…

avanSTATIC TPU MB are uses of TPU is causing a multitude of thermoplastics with completely different characteristics to be found under this denomination. Given this versatility and variety of TPUs in the market, avanzare has developed a wide variety of additives in various formats to respond to each of the requests shown by the market.

avanION 35 is a material widely used in industry in both rigid and foamed applications. The final density obtained as well as the type of polyol play a crucial factor in the antistatic characteristics of the system. avanzare has developed a variety of products that, depending on the type of application and foam structure, can be used as the main and unique antistatic agent or as synergistic with other products on the market.

avanDISS 450 is a line of polymeric masterbatches based on polyester resins, capable of producing permanent and colourable antistatic systems. The generation of permanent antistatic systems is produced thanks to the generation of percolation networks of third polymers inside the polymer to be treated. Avanzare has designed its product line avanDISS, MB polymer products specially designed to generate three-dimensional structures in base polymers.

avanSTATIC TPU 77LMB are uses of TPU is causing a multitude of thermoplastics with completely different characteristics to be found under this denomination. Given this versatility and variety of TPUs in the market, avanzare has developed a wide variety of additives in various formats to respond to each of the requests shown by the market.

avanION 510 is a material widely used in industry in both rigid and foamed applications. The final density obtained as well as the type of polyol play a crucial factor in the antistatic characteristics of the system. avanzare has developed a variety of products that, depending on the type of application and foam structure, can be used as the main and unique antistatic agent or as synergistic with other products on the market.

avanSTATIC TPU-B255 are uses of TPU is causing a multitude of thermoplastics with completely different characteristics to be found under this denomination. Given this versatility and variety of TPUs in the market, avanzare has developed a wide variety of additives in various formats to respond to each of the requests shown by the market.

avanNATUR Nylonstat 5-MB is a variety of existing thermoplastics and the inclusion of each of new grades and materials means that every day it is necessary to develop new additives tailored to the needs of our customers. We produce these additives in accordance with the criteria set by our clients, increasing their catalog and performance in all areas.

avanSTATIC 1050 is a variety of existing thermoplastics and the inclusion of each of new grades and materials means that every day it is necessary to develop new additives tailored to the needs of our customers. We produce these additives in accordance with the criteria set by our clients, increasing their catalog and performance in all areas.

avanSTATIC TPU (L) are uses of TPU is causing a multitude of thermoplastics with completely different characteristics to be found under this denomination. Given this versatility and variety of TPUs in the market, avanzare has developed a wide variety of additives in various formats to respond to each of the requests shown by the market.

avanSTATIC PVC A-033 is a variety of existing thermoplastics and the inclusion of each of new grades and materials means that every day it is necessary to develop new additives tailored to the needs of our customers. We produce these additives in accordance with the criteria set by our clients, increasing their catalog and performance in all areas.

avanION 5 is a material widely used in industry in both rigid and foamed applications. The final density obtained as well as the type of polyol play a crucial factor in the antistatic characteristics of the system. avanzare has developed a variety of products that, depending on the type of application and foam structure, can be used as the main and unique antistatic agent or as synergistic with other products on the market.

Avannatur Evastat 850 as well as the micro-expanded granulated eva are two of the most used eva applications today. Thus, its use in orthopedic plants, templates, construction plates, as well as in any injected piece are gaining ground against other competing products due to their low weight, ease of work and properties. One of the main handicaps that the producers and users of this product is the extremely low electrical conductivity that the eva presents, which together with its use in the form of foam generates, a material with enormous problems of electrostatic discharges and therefore usage problems.

Avannatur Evastat (S) as well as the micro-expanded granulated eva are two of the most used eva applications today. Thus, its use in orthopedic plants, templates, construction plates, as well as in any injected piece are gaining ground against other competing products due to their low weight, ease of work and properties. One of the main handicaps that the producers and users of this product is the extremely low electrical conductivity that the eva presents, which together with its use in the form of foam generates, a material with enormous problems of electrostatic discharges and therefore usage problems.

avanDISS 232 is a line of polymeric masterbatches based on polyester resins, capable of producing permanent and colourable antistatic systems. The generation of permanent antistatic systems is produced thanks to the generation of percolation networks of third polymers inside the polymer to be treated. Avanzare has designed its product line avanDISS, MB polymer products specially designed to generate three-dimensional structures in base polymers.

Avanstatic 747 as well as the micro-expanded granulated eva are two of the most used eva applications today. Thus, its use in orthopedic plants, templates, construction plates, as well as in any injected piece are gaining ground against other competing products due to their low weight, ease of work and properties. One of the main handicaps that the producers and users of this product is the extremely low electrical conductivity that the eva presents, which together with its use in the form of foam generates, a material with enormous problems of electrostatic discharges and therefore usage problems.

avanSTATIC NBR 535 is a very diverse material, with many different applications and formulas, so the additive and the amount needed vary greatly depending on the type of rubber, formula, polarity of the mixture, etc…

avanSTATIC TPU.2 MB are uses of TPU is causing a multitude of thermoplastics with completely different characteristics to be found under this denomination. Given this versatility and variety of TPUs in the market, avanzare has developed a wide variety of additives in various formats to respond to each of the requests shown by the market.

avanNATUR TPU STAT (FC) are uses of TPU is causing a multitude of thermoplastics with completely different characteristics to be found under this denomination. Given this versatility and variety of TPUs in the market, avanzare has developed a wide variety of additives in various formats to respond to each of the requests shown by the market.

avanION 39 is a material widely used in industry in both rigid and foamed applications. The final density obtained as well as the type of polyol play a crucial factor in the antistatic characteristics of the system. avanzare has developed a variety of products that, depending on the type of application and foam structure, can be used as the main and unique antistatic agent or as synergistic with other products on the market.

avanSTATIC Plast Rub is a very diverse material, with many different applications and formulas, so the additive and the amount needed vary greatly depending on the type of rubber, formula, polarity of the mixture, etc…

avanDISS 378 is a line of polymeric masterbatches based on polyester resins, capable of producing permanent and colourable antistatic systems. The generation of permanent antistatic systems is produced thanks to the generation of percolation networks of third polymers inside the polymer to be treated. Avanzare has designed its product line avanDISS, MB polymer products specially designed to generate three-dimensional structures in base polymers.

avanSTATIC PVC B-255 is a variety of existing thermoplastics and the inclusion of each of new grades and materials means that every day it is necessary to develop new additives tailored to the needs of our customers. We produce these additives in accordance with the criteria set by our clients, increasing their catalog and performance in all areas.

avanSTATIC Rubber MB is a very diverse material, with many different applications and formulas, so the additive and the amount needed vary greatly depending on the type of rubber, formula, polarity of the mixture, etc…

avanION 13 is a material widely used in industry in both rigid and foamed applications. The final density obtained as well as the type of polyol play a crucial factor in the antistatic characteristics of the system. avanzare has developed a variety of products that, depending on the type of application and foam structure, can be used as the main and unique antistatic agent or as synergistic with other products on the market.

avanNATUR Nylonstat is a variety of existing thermoplastics and the inclusion of each of new grades and materials means that every day it is necessary to develop new additives tailored to the needs of our customers. We produce these additives in accordance with the criteria set by our clients, increasing their catalog and performance in all areas.

avanSTATIC Rubber is a very diverse material, with many different applications and formulas, so the additive and the amount needed vary greatly depending on the type of rubber, formula, polarity of the mixture, etc…

avanSTATIC Plast is a very diverse material, with many different applications and formulas, so the additive and the amount needed vary greatly depending on the type of rubber, formula, polarity of the mixture, etc…

avanSTATIC PVC A-03 is a variety of existing thermoplastics and the inclusion of each of new grades and materials means that every day it is necessary to develop new additives tailored to the needs of our customers. We produce these additives in accordance with the criteria set by our clients, increasing their catalog and performance in all areas.

avanION 11 is a variety of existing thermoplastics and the inclusion of each of new grades and materials means that every day it is necessary to develop new additives tailored to the needs of our customers. We produce these additives in accordance with the criteria set by our clients, increasing their catalog and performance in all areas.