Products

TPE-S, Shore A69, black, modified for good adhesion to ABS, PC and ABS / PC blends.

TPE-S, Shore A60, modified for good adhesion to various polyamides such as PA6, PA66, PA6.12

TPE-S, Shore A75, modified for good adhesion to polycarbonate

BARLOG plastics GmbH Kebaflex® / FE 170403 is a TPE-S, Shore A85, modified for good adhesion to various polyamides such as PA6, PA66, PA6.12, etc. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A67, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends, compliant for food contact according to EU 10/2011.

TPE-S, Shore A45, modified for good adhesion, etc. On PBT, PC and PC / ABS blends.

TPE-S, Shore A55, black, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.

BARLOG plastics GmbH Kebaflex® / SG 85 HT A.01 is a TPE-S, Shore A85, with improved compression set at high temperatures. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A60, natural, modified for good adhesion to ABS, PC and ABS / PC blends

TPE-S, Shore A79, natural, modified for good adhesion, etc. On PBT and PBT blends. KEBAFLEX - H / SPBT 70 A.02 natural was developed specially for use outdoors (UV stabilization) and has an optimized demolding behavior.

TPE-S, Shore A55, modified for good adhesion to adhesion-modified polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

TPE-S, Shore A65, translucent. Abrasion resistant, high dynamic resilience, good DVR and good adhesion to PP in 2K injection molding.

TPE-S, Shore A75, black, modified for good adhesion, etc. ABS and PMMA.

TPE-S, Shore A55, natural, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

TPE-S, Shore A60, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

TPE-S, Shore A80, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY).

TPE-S, Shore A80, natural, modified for good adhesion to various polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

TPE-S, Shore A76, black, modified for good adhesion to ABS, PC and ABS / PC blends. Also suitable for automotive interior applications.

BARLOG plastics GmbH Kebablend® / RS are special compounds based on different polymers for applications by which radiation is to be shielded. Kebablend® / RS 170701/1 was developed for applications that are intended to shield soft and hard X-rays.

TPE-S, Shore A80, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY).

TPE-S, Shore A54, modified for good adhesion to polyamides such as PA6, PA66, PA12 or partially aromatic PA types such as e. g. GRIVORY GV (manufacturer EMS-GRIVORY)

TPE-S, Shore A45, modified for good adhesion to polyamides such as PA6, PA66, PA612 or partially aromatic PA types such as GRIVORY GV (manufacturer EMS-GRIVORY). KEBAFLEX - H / SPA1 40 A.02 black is UV-resistant and therefore also suitable for outdoor applications, for example in the automotive sector.

TPE-S, Shore A68, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY).

TPE-S, Shore A35, modified for good adhesion to polyamides such as PA6, PA66, PA12 or partially aromatic PA types such as e. g. GRIVORY GV (manufacturer EMS-GRIVORY)

TPE-S, Shore A50, black, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.

TPE-S, Shore A64, modified for very good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY).

TPE-S, Shore A60, modified for good adhesion, etc. On PBT and PBT blends.

TPE-S, Shore A55, black, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.

TPE-S, Shore A75, modified for good adhesion, etc. On PBT and PBT blends.

TPE-S, Shore A45, black, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.

TPE-S, Shore A45, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.

TPE-S, Shore A65, black, modified for good adhesion, etc. On ABS, PC and PC / ABS blends. KEBAFLEX - H / SPC 55 A.03.1 black was developed specially for automotive interior applications.

TPE-S, Shore A60, natural, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

TPE-S, Shore A62, natural, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)