Products

TPE-S, Shore A80

TPE-S, Shore A40, black

TPE-S, Shore A80

TPE-S, Shore A60, natural

TPE-S, Shore A60, black, improved compression set at high temperatures

TPE-S, Shore A46, black

TPE-S, Shore A69, black, modified for good adhesion to ABS, PC and ABS / PC blends.

BARLOG plastics GmbH Kebaflex® / SG 85.E A.02 is a TPE-S, Shore A86, extrusion. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

KEBABLEND / EC FE 190501 TPE is a TPE-S with a Shore hardness of D 45. It has good electrical conductivity properties.

TPE-S, Shore A31, translucent, food compliant according to EU 10/2011 and FDA

TPE-S, Shore A25, black

BARLOG plastics GmbH Kebaflex® / FE 170403 is a TPE-S, Shore A85, modified for good adhesion to various polyamides such as PA6, PA66, PA6.12, etc. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A75, black, modified for good adhesion, etc. ABS and PMMA.

TPE-S, Shore A65, black

TPE-S, Shore A30, natural

TPE-S, Shore A70, black, UV-resistant

TPE-S, Shore A63, translucent, food compliant according to EU 10/2011 and FDA

BARLOG plastics GmbH Kebaflex® / S 95F A.01 Translucent is a TPE-S, Shore A95, translucent, suitable for food contact. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

BARLOG plastics GmbH Kebaflex® / SG 85 A.01 is a TPE-S, Shore A85. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A45, natural

TPE-S, Shore A60, natural, modified for good adhesion to ABS, PC and ABS / PC blends

TPE-S, Shore A35, translucent, suitable for food contact

BARLOG plastics GmbH Kebaflex® / S 90 A.05 is a TPE-S, Shore A90. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A75, modified for good adhesion to polycarbonate

TPE-S, Shore A50, translucent

TPE-S, Shore A67, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends, compliant for food contact according to EU 10/2011.

TPE-S, Shore A70, translucent

TPE-S, Shore A60, translucent

TPE-S, Shore A55, translucent

TPE-S, Shore A70, translucent

TPE-S, Shore A55, black, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.

TPE-S, Shore A45, modified for good adhesion, etc. On PBT, PC and PC / ABS blends.

TPE-S, Shore A63, modified for adhesion to PET, food compliant according to EU 10/2011 and FDA

TPE-S, Shore A55, modified for good adhesion to adhesion-modified polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

BARLOG plastics GmbH Kebablend® / M FE 190401 TPE (black) is a development product based on TPE for the production of injection molded magnets. The material has a Shore A 82 hardness.

TPE-S, Shore A79, natural, modified for good adhesion, etc. On PBT and PBT blends. KEBAFLEX - H / SPBT 70 A.02 natural was developed specially for use outdoors (UV stabilization) and has an optimized demolding behavior.