Products

TPE-S, Shore A60, natural

BARLOG plastics GmbH Kebaflex® / U FE 181105/2 Natural is a TPU with a Shore hardness of A 70. It is characterized by high flexibility, very good wear and abrasion resistance as well as good damping and resilience behavior.

BARLOG plastics GmbH Kebaflex® / U A 75 ST B01 natural is a polyester TPU with high resistance to oils and fats, very good damping and resilience behavior, high temperature resistance and very good compression set. KEBAFLEX / U A75 ST B.01 natural does not contain any plasticizers. The trade name KEBAFLEX / U stands for a range of thermoplastic polyurethane elastomers. KEBAFLEX / U is characterized by excellent sliding and wear behavior, suitability for use at elevated temperatures, good UV resistance and high mechanical resilience.

TPE-S, Shore A64, modified for very good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY).

BARLOG plastics GmbH Kebaflex® / SG 90 A.02 is a TPE-S, Shore A90, natural. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

BARLOG plastics GmbH Kebaflex® / U A 85 ST B01 natural is a TPE-U, Shore A85. It is characterized by high flexibility and very good wear and abrasion resistance. The trade name KEBAFLEX / U stands for a range of thermoplastic polyurethane elastomers. KEBAFLEX / U is characterized by excellent sliding and wear behavior, suitability for use at elevated temperatures, good UV resistance and high mechanical resilience.

TPE-S, Shore A75, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.

BARLOG plastics GmbH Kebaflex® / U A 85 EF B01 natural is a TPE-U, Shore A85, easy flowing. The trade name KEBAFLEX / U stands for a range of thermoplastic polyurethane elastomers. KEBAFLEX / U is characterized by excellent sliding and wear behavior, suitability for use at elevated temperatures, good UV resistance and high mechanical resilience.

TPE-S, Shore A25, natural

TPE-S, Shore A65, natural

TPE-S, Shore A50, natural

TPE-S, Shore A80, natural, modified for good adhesion to various polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

TPE-S, Shore A70, natural

TPE-S, Shore A50, modified for good adhesion to polyamides such as PA6, PA66, PA12 or partially aromatic PA types such as GRIVORY GV (manufacturer EMS-GRIVORY)

PBT + X-GF45, 45% glass fiber reinforced, optimized surface quality, improved weld line strength and reduced tendency to warp, color settings with approval for food contact available.

TPE-S, Shore A60, natural, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

BARLOG plastics GmbH Kebaflex® SG 85 A.1 is a TPE-S, Shore A85, natural. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A35, natural

TPE-S, Shore A41, natural, modified for good adhesion to ABS, PC and ABS / PC, food compliant according to EU 10/2011 and FDA

TPE-S, Shore A45, modified for good adhesion, etc. On PBT, PC and PC / ABS blends.

TPE-S, Shore A67, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends, compliant for food contact according to EU 10/2011.

PBT + PET, 30% glass fiber reinforced, suitable for contact with food (EU)

BARLOG plastics GmbH Kebaflex® / U A 85 HT B01 natural is a TPE-U, Shore A85, high temperature resistance. The trade name KEBAFLEX / U stands for a range of thermoplastic polyurethane elastomers. KEBAFLEX / U is characterized by excellent sliding and wear behavior, suitability for use at elevated temperatures, good UV resistance and high mechanical resilience.

TPE-S, Shore A45, natural

TPE-S, Shore A60, natural, modified for good adhesion to ABS, PC and ABS / PC blends

BARLOG plastics GmbH Kebaflex® / S FE 180401 natur is a development product for the production of flexible, flame-retardant components. Kebaflex® / S FE 180401 natural has a Shore hardness of 80 A and, from a wall thickness of 1.6 mm, achieves the V0 classification based on the UL 94 test standard. For the production of seals in electrical and electronic applications.

TPE-S, Shore A30, natural

TPE-S, Shore A63, modified for adhesion to PET, food compliant according to EU 10/2011 and FDA

TPE-S, Shore A55, natural, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

TPE-S, Shore A79, natural, modified for good adhesion, etc. On PBT and PBT blends. KEBAFLEX - H / SPBT 70 A.02 natural was developed specially for use outdoors (UV stabilization) and has an optimized demolding behavior.

linear PPS, 20% glass fiber reinforced, laser weldable, natural

TPE-S, Shore A62, natural, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

BARLOG plastics GmbH Kebaflex® / U A 63 ST B01 Natural is a TPU with a Shore hardness of A 63. It is characterized by high flexibility and very good wear and abrasion resistance.