Products

TPE-S, Shore A80

TPE-S, Shore A40, black

TPE-S, Shore A80

TPE-S, Shore A60, natural

TPE-S, Shore A46, black

Polyester elastomer, Shore D25, suitable for food contact

BARLOG plastics GmbH Kebaflex® / S 95F A.01 Translucent is a TPE-S, Shore A95, translucent, suitable for food contact. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

BARLOG plastics GmbH Kebaflex® / S 90 A.05 is a TPE-S, Shore A90. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A50, translucent

TPE-S, Shore A60, black

TPE-S, Shore A31, translucent, food compliant according to EU 10/2011 and FDA

TPE-S, Shore A25, black

BARLOG plastics GmbH Kebaflex® / SG 85 A.01 is a TPE-S, Shore A85. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A50, natural

BARLOG plastics GmbH Kebaflex® / S D50 A.02 Black is a TPE-S, Shore D50, black. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

BARLOG plastics GmbH Kebaflex® / S 80 A.01 is a TPE-S, Shore A83, translucent. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A60, translucent

BARLOG plastics GmbH Kebaflex® SG 95 A.01 black is a TPE-S, Shore A95, black. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

BARLOG plastics GmbH Kebaflex® / SG 90 A.02 is a TPE-S, Shore A90, natural. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A77, good wear behavior, translucent

TPE-S, Shore A65, natural

TPE-S, Shore A57, black

TPE-S, Shore A25, natural

TPE-S, Shore A65, black

TPE-S, Shore A35, translucent, suitable for food contact

TPE-S, Shore A30, natural

TPE-S, Shore A55, translucent

TPE-S, Shore A70, translucent

TPE-S, Shore A70, translucent

TPE-S, Shore A70, natural

TPE-S, Shore A65, translucent

TPE-S, Shore A55, black

BARLOG plastics GmbH Kebaflex® / S FE190902 Translucent is a TPE-S, Shore A86, very good wear behavior, translucent. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A50, black

TPE-S, Shore A45, translucent

BARLOG plastics GmbH Kebaflex® S 95 A.01 is a TPE-S, Shore A95, translucent. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.