Products

PBT + X-GF45, 45% glass fiber reinforced, optimized surface quality, improved weld line strength and reduced tendency to warp, color settings with approval for food contact available.

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

Polyester elastomer, Shore D25, suitable for food contact

PBT unreinforced, injection molding type, approved for use in contact with food

POM copolymer unreinforced, low viscosity

POM copolymer unreinforced, medium viscosity

POM copolymer unreinforced, highly viscous for injection molding and extrusion processing.

TPE-S, Shore A50, translucent, suitable for food contact

TPE-S, Shore A67, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends, compliant for food contact according to EU 10/2011.

TPE-S, Shore A35, translucent, suitable for food contact

BARLOG plastics GmbH Kebaflex® / S 95F A.01 Translucent is a TPE-S, Shore A95, translucent, suitable for food contact. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A63, modified for adhesion to PET, food compliant according to EU 10/2011 and FDA

TPE-S, Shore A63, translucent, food compliant according to EU 10/2011 and FDA

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

PBT + PET, 30% glass fiber reinforced gray, suitable for contact with food (EU)

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact

PBT-M40, PBT, 40% mineral

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

BARLOG plastics GmbH Kebaflex® / S FE 160602 is a TPE-S, Shore D40, also suitable for extrusion, food-compliant according to Regulation (EU) No. 10/2011. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

PPS-GF30, linear PPS, 30% glass fiber reinforced, impact resistant, approved for food applications according to EU and FDA guidelines.

TPE-S, Shore A55, food compliant according to EU 10/2011 and FDA

BARLOG plastics GmbH Kebaflex® / S FE 160404 is a TPE-S, Shore D28, also suitable for extrusion, food compliant according to 10/2011 EG. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A70, also suitable for extrusion, food compliant according to 10/2011 EG

TPE-S, Shore A41, natural, modified for good adhesion to ABS, PC and ABS / PC, food compliant according to EU 10/2011 and FDA

PPS-GF30, linear PPS, 30% glass fiber reinforced, impact resistant, approved for food applications according to EU and FDA guidelines.

PBT + PET, 30% glass fiber reinforced, suitable for contact with food (EU)

PBT + X-GF45, 45% glass fiber reinforced, optimized surface quality, improved weld line strength and reduced tendency to warp, color settings with approval for food contact available.

TPE-S, Shore A31, translucent, food compliant according to EU 10/2011 and FDA

POM copolymer unreinforced, medium viscosity for injection molding

POM copolymer unreinforced, medium viscosity, worldwide drinking water approvals