Products

BCC Products now offers a revolutionary state-of-the-art machineable high density board for today's demanding tooling requirements. MB 5000 is an extremely tough, high impact Urethane Plank that can be used for metal forming as well as nickel plating mandrels.

BC8990 is a two-component urethane elastomer compound specifically designed for general purpose molding and casting of various shapes. This product is a safe, easy-to-handle, room temperature mixing and curing system that contains no TDI, MDA or MOCA. BC8990 may be used to provide abrasion resistant liners, pads and bumpers. The low shrinkage, low viscosity, superior toughness, and excellent detail reproduction of makes this system ideal for general purpose castings and quality tooling operations. It may also be used in potting and encapsulating applications.

MB 1150 is an Avocado colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1150 is low density foam of approximately 15lbs/ft³ board. Easily cut using CNC machining equipment or by hand the MB 1150 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.

BC 4544 is a polyester resin base compound that is easy to use, sets in minutes, and can be sanded or carved almost immediately. BC 4544 can be carved, sanded, filed, scraped, drilled, tapped or machined to a feather edge. No paint preparation is required and even accepts stain better than wood.

BC 7009-1 is an iron oxide filled, low-cost mass casting system. Thicknesses up to two inches in non-conductive molds, and four inches in conductive molds can be achieved without foaming or yielding excessive shrinkage. Ideal for stretch forms, patterns, dies, molds, duplications, prototypes, etc.

MB 1000 is a simulated wood-like product (free of grain) that is dimensionally stable and exhibits unsurpassed woodworking properties. Unlike other model board stock, MB 1000 is offered in both Pine and Mahogany colors. A standard carton of MB 1000 contains three 60 inch x 16 inch x 2 inch boards which yields approximately 40 board feet. A single board carton is also available and may be shipped standard Parcel Post if desired. For convenience, MB 1000 is shipped pre-planed (top and bottom surfaces) for preparation in gluing assembled pieces.

MB2001 is a general purpose light weight urethane board engineered specifically to meet the tooling requirements of a wide range of applications for the automotive/aerospace, prototype, foundry, and architectural industries. MB2001 is an easy to machine, simulated wood-like product (free or grain) that is dimensionally stable and exhibits unsurpassedwoodworking properties. Some of its outstanding performance features are listed below

BC 8163 is a very low viscosity, rapid setting, rigid urethane compound. This system will cure quickly to a hard, tough, impact resistant casting. BC 8163 is non-sensitive to moisture after cure and will readily bond to itself if stage pours are required. The one-to-one volume mix ratio makes the system readily adaptable for machine mixing and dispensing. BC 8163 is recommended in applications where a "thermoplastic feel" is desired.

HPX-825 is an aluminum filled metal-like machineable modeling plank that is dimensionally stable and exhibits unsurpassed machineable properties.

BC 7062 are aluminum filled, low viscosity epoxy mass casting resins. These room temperature cure systems allow the user choice thicknesses of 1/8 inch to a maximum of 6 inches without foaming or yielding excessive shrinkage. Casting thicknesses may be increased by incorporating aluminum needles, puffs or granules. BC 7062, when properly cured, provides nearly perfect reproduction, resulting in a dimensionally stable, hard, tough surface. For use in constructing duplicate models, prototypes, patterns, facing dies, etc.

BE 290 is a low viscosity, medium pot life, room temperature laminating system. BE 290 features low odor, reduced toxicity and adequate working life for construction medium and large fabricating tools.

BCC Products now offers a truly metal-like machineable modeling plank for today's demanding applications. MB 8250 is an aluminum filled product that is dimensionally stable and exhibits unsurpassed machinable properties.

BC 8650 is an advanced fast cast polyurethane tooling system. BC 8650 features low viscosity, low exotherm and minimal shrinkage. Kwik Kast Blue cures hard, yet more durable resulting in less brittle parts. Designed for constructing patterns, prototypes, duplications, negatives, low temperature vacuum form tools, tracing models, etc.

BCC Products now offers a revolutionary state-of-the-art machinable fixture board for today's demanding tooling requirements. MB 3500 is an extremely tough, high impact Urethane Plank, that can replace aluminum and other metals for many foundry applications.