Products

Foamazol™ 63 is intended for extruded ribbons and sheets where very fine celled foam is desirable.

Foamazol™ 61 is intended for applications where maximum density reduction is required at relatively low processing temperatures. It is suitable for low pressure structural foam, injection molding, and extrusion.

Foamazol™ 72 is intended for applications that require a very fine and uniform cell structure for with relatively smooth skins.

Foamazol™ 71 is intended for applications that require very fine and uniform cell structure for both chemical and direct gas foam systems.

Foamazol™ 86 is intended for extrusion and molding applications where lower processing temperatures are used.

Foamazol™ 91 is intended for applications where lower processing temperatures are used that require uniform cell structure with good density reduction.

Foamazol™ 80 is recommended for applications requiring a high gas yield.

Foamazol™ 88 is recommended for applications requiring a high gas yield.

Foamazol™ 62 is intended for sink mark removal and warp reduction in injection molding applications.

Foamazol™ 95 is intended for applications in polystyrene or polystyrene-type materials. It can be used in injection molding and extrusion processes to produce very fine celled foams.

Foamazol™ 30 is recommended recommended for low temperature applications where high gas yields are desirable

Foamazol™ 41 is intended for applications that require a very fine and uniform cell structure with relatively smooth skins.

Foamazol™ 50 is recommended for applications where a relatively fine cell structure is required at processing temperatures about 175-230° C (347-446° F)

Foamazol™ 93 is recommended for applications where good dispersion is important and a small amount of foam is necessary.

Foamazol™ 92 is intended for applications where lower processing temperatures are used that require uniform cell structure with good density reduction.

Foamazol™ 73 is for use in injection molding and extrusion applications where very fine and uniform cells are required. Especially recommended for nucleation of direct gassed polystyrene foams.

Foamazol™ 84 is a free flowing powder designed for use in PVC applications. This product combines the benefits of both endothermic exothermic CFAs to produce controlled gas yields and obtain uniform cell structures.

Foamazol™ 81 is recommended for applications requiring a high gas yield.

Foamazol™ 85 is recommended for applications in polystyrene that require high gas pressure.

Foamazol™ 94 is recommended for applications where good dispersion is important and a small amount of foam is necessary.

Foamazol™ 70 is recommended for applications where very fine celled foams are required.

Foamazol™ 57 is recommended for foaming in injection molding and extrusion.

Foamazol™ 90 is recommended for low temperature applications where high gas yields are desirable.

Foamazol™ 87 is recommended for wire and cable applications such as coaxial cable.

Foamazol™ 40 is recommended for applications where a relatively fine cell structure is required at processing temperature around 175-230° C (347-446° F).

Foamazol™ 73S is For use in injection molding and extrusion applications where very fine and uniform cells are required. Especially recommended for nucleation of direct gassed polystyrene foams.

Foamazol™ 96 is intended for applications where lower processing temperatures are used that require uniform cell structure with good density reduction. Has processing aid to help reduce die drool.

Foamazol™ 60 is recommended for applications where relatively high temperatures are used in the range of 205-275° C (401-527° F).