Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Features
- Tin free
- Low viscosity
- Increases impact resistance
- Low skin irritation
- Low modulus
Applications & Uses
- Applications
- Coating Type
- Applications
- 3D printing resins
- Coatings for glass
- Primer coatings
Properties
- Cured Properties
- Uncured Properties
Value | Units | Test Method / Conditions | |
Durometer Hardness | D80 | - | - |
Glass Transition Temperature (Tg) | 63.0 | °C | - |
Linear Shrinkage | 1.1 | % | - |
Nominal Viscosity | 57500.0 | cP | - |
Value | Units | Test Method / Conditions | |
Density (25°C) | 1.08 | g/cm³ | — |
Pt-Co Color (APHA) | max. 50 | - | - |
Refractive Index (25°C) | 1.468 | - | - |
Refractive Index (25°C) | 1.471 | — | — |
Viscosity | 67000.0 | cP (at 20 rpm) | - |
Viscosity at 25°C | 67000.0 | cP | - |
Technical Details & Test Data
- Typical Formulations
Adhesion Properties Substrate I30 I50 TM50 TP50 H50 HE30 ABS X XX Aluminum Cold Rolled Steel
Glass HDPE PET X X XXX XXX X PMMA X XXX XX XX Polycarbonate X X XX XXX Polypropylene PVC X X Stainless Steel X X Recommended XX Highly Recommended XXX Strongly Recommended
Typical Formulations Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 3,000 600 2,500 600 200 1,400 * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi**
1,100 3,600 4,500 2,200 2,000 1,200 Elongation, 6** 60 120 4 12 4 60 Elastic Modulus, ksi*
10 75 180 55 80 20 Durometer Hardness
38D 53D 78D 64D 71D 52D Water Absorption, 96 (24 hrs)
0.91 1 1 1.21 0.93 4 MEK Double Rubs (#)
5 4 >200 7 30 6 Tg(DMA)=63°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Viscosity Reduction With Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.