Products

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ L-51 is a synthetic spherical silica with low cohesiveness and high fluidity. SOLESPHERE™ L-series has a lower specific surface area than the H-series grades. It is suitable for chemical surface modification or coating. Despite the difference in surface area, the L-series products keep the same oil absorption capacity as the H-series. It also offers better slipperiness and spreadability than the H-series. Because of the product's porosity, it has a light scattering effect for cosmetics and acts as a matting agent for coatings. Its particle size distribution is narrow, and hence it can give a single asperity to a thin coating layer.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ NP-200 is a non-porous, heat-treated silica particle. Belonging to the NP-series, it has a very high hardness, so it is often used as a filler for increasing resin hardness. The high refractiveness of these grades offers good transparency when added to resins and films. It is also used for anti-blocking in film applications. The NP-series has excellent heat resistance and is very dimensionally stable at various temperature ranges.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-51 is a synthetic spherical silica with low cohesiveness and high fluidity. This product is multi-porous and has a high specific surface area. This RESIFA™ SOLESPHERE™ silica is used for catalyst supports, as an additive in cosmetic and personal care applications, and in industrial applications.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-121 is a synthetic spherical silica with low cohesiveness and high fluidity. This product leaves a smooth, hydrated skin feel with a matte visual effect. It is multi-porous and has a high specific surface area. This product offers the most functionality for O/W emulsions.

AGC Chemicals Americas, Inc. RESiFA™ SOLESPHERE™ H-51-ET has a water repellent effect by the innovative surface treatment technology. It is able to blend readily in W/O emulsion cream formulation. The inside porous structure was maintained underneath the surface coatings. Thus this product retains a moisture absorbing function which is a feature of silica gel.

Gateway Food Products Company Nature Wax C-3 is an all-natural soy wax blend that is highly regarded for its exceptional jar adhesion, resulting in minimal wet spots. It also exhibits minimal frosting and provides an excellent scent throw when used in container candles. The wax is specifically formulated for a single pour, ensuring a smooth, re-congealed burn pool. It is designed to be used specifically in container candles.

Alnor Oil Company Organic Castor Oil is designed for the personal care market, particularly in beauty and care applications such as bath and shower products and skincare. Its primary end use revolves around bath and shower applications, notably in the production of bar soaps. This organic castor oil serves as a key ingredient, catering to the preferences of consumers seeking natural and organic components in their personal care routines.

Capmul® GMO-50 glycerol monooleate is a food-grade multifunctional emulsifier that is highly useful in personal care & cosmetic applications such as, lotions, creams, lipsticks, and eyeliners. Capmul GMO-50 is sunflower glycerides and suitable in barrier creams and lotions. It easily forms gel phases with other surfactants in aqueous environments and can serve as a refatting agent. It is an excellent non polymeric invert emulsifier providing an elegant finish to your formulation. It is manufactured in USA.

TINOX RED 4820P pigment is suitable for most applications except where a high degree of fastness is required and special for plastic.

Castor Oil is used in the medical, cosmetics and skin care industries, as well as in industrial applications for lubricants, plastics, rubbers, and synthetic resins.

Adell Polyamide BS-30 is a Polyamide 6 (Nylon 6) material. It is available in North America.Typical application of Adell Polyamide BS-30: Automotive

OceanCal™ 5U Oolitic Aragonite is one of the world's purest forms of the ocean's naturally precipitated biogenic calcium carbonate. Naturally renewable and sustainable. Highly bioavailable calcium. High surface area. High brightness. High microporosity. High chemical purity. Offered in a range of controlled particle sizes. Approved for use in organic production in accordance with the USDA National Organic Standards. Can be offered with stearic acid surface treatment (please see "OceanCal 5S" product). Applications include, but are not limited to: agriculture, paints, coatings, adhesives, sealants, PVC, plastics, rubber, pharmaceuticals, nutraceuticals, cosmetics, water treatment.

Adell Plastics, Inc. Adell™ Polyamide BR-33 is a Polyamide 6 (Nylon 6) material filled with 13% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-33: Flame Rated.Typical application of Adell Polyamide BR-33: Automotive

OceanCal™ 5S Oolitic Aragonite is one of the world's purest forms of the ocean's naturally precipitated biogenic calcium carbonate. Naturally renewable and sustainable. Highly bioavailable calcium. High surface area. High brightness. High microporosity. High chemical purity. Offered in a range of controlled particle sizes. Can be offered without stearic acid surface treatment (please see "OceanCal 5U" product). Applications include, but are not limited to: agriculture, PVC, plastics, rubber, pharmaceuticals, nutraceuticals, and water treatment.

TINOX Color Yellow 1830 is a high performance pigment.

Please contact Adell Plastics, Inc. for additional information.

Adell Plastics, Inc. Adell™ Polyamide BR-34 is a Polyamide 6 (Nylon 6) material filled with 20% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-34: Flame Rated.

Adell Plastics, Inc. Adell™ Polyamide BT-13 is a Polyamide 6 (Nylon 6) material filled with 13% glass fiber. It is available in North America.Important attributes of Adell Polyamide BT-13 are: Flame Rated Impact Modified

TINOX Yellow 120P Organic pigment is a high performance with generally very good fastness properties. It is recommended for all applications. It is special use in plastic.

Broccoliseed Oil is obtained by gently pressing the fine seeds of the broccoli plant (Brassica oleracea). Broccoli is a vegetable in the crucifer family (Brassicaceae), which originated in the eastern Mediterranean. In addition to the Mediterranean, broccoli is also grown in Germany, Austria, England and the United States.

Adell Plastics, Inc. Adell™ Polyamide BT-34 is a Polyamide 6 (Nylon 6) material filled with 20% glass fiber. It is available in North America.Important attributes of Adell Polyamide BT-34 are: Flame Rated Impact Modified

FloraRez® 785 is a glycerol ester derived from highly hydrogenated gum rosin. This thermoplastic resin exhibits a very pale color and demonstrates remarkable resistance to oxidation and color degradation. It serves as a valuable tackifying resin component in diverse applications such as adhesives, inks, coatings, and personal care formulations, particularly in scenarios where oxidative stability is essential.

Mosselman Castor Oil First Pression (8001-79-4) is the vegetable oil obtained from the seed of the castor tree “Ricinus communis” It contains a major amount of hydroxy acid.

OceanCal™ 8U Oolitic Aragonite is one of the world's purest forms of the ocean's naturally precipitated biogenic calcium carbonate. Naturally renewable and sustainable. Highly bioavailable calcium. High surface area. High brightness. High microporosity. High chemical purity. Offered in a range of controlled particle sizes. Approved for use in organic production in accordance with the USDA National Organic Standards. Can be offered with stearic acid surface treatment (please see "OceanCal 8S" product). Applications include, but are not limited to: agriculture, paints, coatings, adhesives, sealants, PVC, plastics, rubber, pharmaceuticals, nutraceuticals, cosmetics, and water treatment.

Our first material, 100% biodegradable, consists of coffee grounds in variable percentage and PLA. A bio-based and renewable material.

Adell Plastics, Inc. Adell™ Polyamide BR-14 is a Polyamide 6 (Nylon 6) material filled with 20% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-14: Flame Rated.

Adell Plastics, Inc. Adell™ Polyamide BR-18 is a Polyamide 6 (Nylon 6) material filled with 40% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-18: Flame Rated.

Adell Plastics, Inc. Adell™ Polyamide BT-17 is a Polyamide 6 (Nylon 6) material filled with 33% glass fiber. It is available in North America.Important attributes of Adell Polyamide BT-17 are: Flame Rated Impact Modified

Adell Plastics, Inc. Adell™ Polyamide BW-37 is a Polyamide 6 (Nylon 6) material filled with 33% glass fiber. It is available in North America.Important attributes of Adell Polyamide BW-37 are: Flame Rated Good Esthetics Typical application of Adell Polyamide BW-37: Automotive

Please contact Adell Plastics, Inc. for additional information.

Adell Polyamide BT-33 General Purpose is a Polyamide 6 (Nylon 6) material. It is available in North America.

FloraRez® 485 is a high-quality glycerol ester derived from partially hydrogenated gum rosin that has undergone purification to ensure exceptional taste and odor characteristics. It is meticulously protected from contaminants. This pale-colored thermoplastic resin possesses a low acid number. In numerous countries, it is considered suitable for incorporation into chewing gum bases as an ingredient. Additionally, it serves as a resin component in a wide range of applications, including adhesives, inks, coatings, and personal care formulations, where oxidative stability is needed.