Products

Cola®Teric SC is a biodegradable amphoteric surfactant for cleaning applications at both high and low pH. This high-foaming hydrotrope provides superior cleaning performance over a majority of amphoteric surfactants. In addition to industrial and institutional cleaning, the mildness of Cola®Teric SC makes it a good fit for household and personal care applications.

Cola®Terge FACC is a fatty acid amido complex, which provides excellent wetting and detergency properties in medium and high electrolyte-based cleaning formulations. This detergent concentrate offers superior cost/effectiveness versus systems requiring the use of hydrotropes. Its foaming characteristics are low to moderate, producing a lower and less stable foam than ethoxylated nonionics. Cola®Terge FACC is ideal for use in heavy-duty floor cleaners and wax strippers. Product should be stored between 40°F and 120°F to maintain stability. Based upon chemical composition the product is expected to be completely biodegradable.

Cola®Cap MA259 is a 100% active, low-foaming surfactant that provides excellent product color and chemical stability over a wide pH range. Cola®Cap MA259 offers optimization of detergency, wetting and food soil defoaming characteristics. Cola®Cap MA259 incorporates a capping group that provides unique functionality, greater biodegradability and does not interfere with wetting, detergency or surface activity. It is also structurally suffi cient to provide good food soil defoaming properties. Cola®Cap MA259 develops low foaming properties without the use of propylene oxide capping that potentially could inhibit biodegradation.

Cola®Terge 226 is an optimized blend of nonionic and cationic surfactants, intended to be used for water-based degreasing. A cleaning formulation based on Cola®Terge 226 can often replace a solvent because of the efficient cleaning effect on grease and oil. When an oily soil contains a lot of soot and pigments, the cleaning effect will often be much better than with conventional products. A water-based alkaline cleaning formulation based using Cola®Terge 226 and appropriate complexing agent is a significant improvement compared with conventional alkaline cleaners.

Cola®Lux SO provides good detergency, exceptionally high foaming, and viscosity forming properties. It can be formulated with anionic, nonionic, and cationic materials. This product is recommended for shampoos, bubble baths, hand soaps, air conditioners, cream rinses, creams and lotions, shaving creams, household products, and industrial and institutional products.

Cola®Mulse CS300 is a cationic emulsifier designed to enhance water beading and aid drying in rinse aid formulations. To improve sheeting beading balance, Cola®Mulse CS400 or Cola®Mulse CS205 may be used as coemulsifiers.

Cola®Liquid DT-2 is a non-ionic 2:1 diisopropanolamine (DIPA) amide of tall oil fatty acids. Colonial Chemical’s Cola®Liquid products consist of completely liquid, consumer acceptable non-DEA amides that perform like traditional alkanolamide surfactants. Cola®Liquid DT-2 can be used as a substitute for 2:1 DEA amides in any application where traditional alkanolamide surfactants have been used. Cola®Liquid DT-2 is effective in a wide variety of household and industrial products.

Cola®Terge 102 is a high performance blend of surfactants designed for use in water-based degreasing and hard surface cleaning applications. It is a fast wetter for penetrating soils and surfaces and a powerful emulsifier while holding soils in suspension. Cola®Terge 102 is suitable for use in alkaline, acidic and general purpose cleaners. The simple combination of Cola®Terge 102 with or without builders makes an excellent water-based degreaser.

Alcohols, C8-C10, ethoxylated propoxylated. Colonial DF-16 is a Low foam Wetting Agent.

Cola®Teric HLA are high foaming amphoteric surfactants that provide outstanding hydrotroping properties in high electrolyte systems. Additionally, they contribute to wetting, detergency, and rinsibility. These high foaming amphoterics produce a stable, slow draining, dense foam, and is ideally suited for use in household and industrial cleaners, mild personal care cleansers, and oilfield related foamers.

Cola®Teric JBS is a low foaming amphoteric surfactant offering excellent wetting properties over a wide pH range. Cola®Teric JBS has excellent stability in strong acid and or alkaline systems. It is also an effective wetting agent for use in steam and high pressure spray applications where low foam is essential.

Cola®Det L116N is is a mild, non-alkanolamide, high-foaming concentrate. It displays multifunctional properties including good detergency and high foaming even at low active levels. Cola®Det L116N generates excellent viscosity and is ideal for use in non-alkanolamide shampoos, bath products, skin cleansers, and light-duty laundry detergents.

Cola®Cap MA139 is a 100% active, low-foaming surfactant that provides excellent product color and chemical stability over a wide pH range. Cola®Cap MA139 offers optimization of detergency, wetting and food soil defoaming characteristics. Cola®Cap MA139 incorporates a capping group that provides unique functionality, greater biodegradability and does not interfere with wetting, detergency or surface activity. It is also structurally sufficient to provide good food soil defoaming properties. Cola®Cap MA139 develops low foaming properties without the use of propylene oxide capping that potentially could inhibit biodegradation.

Cola®Solv TES is a cationic additive for improving rinse and drying, reducing static charges on surfaces, preventing corrosion adding lubrication to textiles and brushes and applying shine to hard surfaces.

Cola® Lux C-10 by Colonial Chemical is comprised of Decyl dimethyl amine oxide. It is commonly used as Coupling Agent and Hydrotrope for a variety of applications in Home Care and Carpet & Upholstery. It is available in Liquid form.

Cola®Wet sulfosuccinates, chemically classified as dialkyl sulfosuccinates, are anionic surfactants that provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing. Cola®Wet sulfosuccinates are suitable for use in a broad range of applications such as wetting agents, in cosmetics, detergents, agricultural, mining and textile products, as well as emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations.

Cola®Wet surfactants are chemically classified as dialkyl sulfosuccinates.  These anionic surfactants provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing. Cola®Wet products are suitable for use in a broad range of applications such as wetting agents, detergents, agricultural, mining and textile products, as well as, emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations.

Cola®Mid 3458 is a linoleic diethanolamide (INCI Designation: Linoleamide DEA) designed to provide excellent foam stabilization, viscosity building, conditioning, and emulsification properties in shampoos, skin cleansers, and other personal care products. For industrial applications, it is an effective thickener and emulsifier for a variety of oils and is useful in the development of micro-emulsion detergent and solvent-based cleaners.

Cola®Terge LFD-C is a low foaming detergent concentrate offering outstanding detergency, wetting and rinsibility properties in acid and alkaline cleaners. Additionally, Cola®Terge LFD-C can be utilized to boost the detergency and rinsability of alkaline metal cleaner formulations based on capped low foam nonionic surfactants. Typical applications include spray, steam, and soak tank cleaning. Cola®Terge LFD-C has been tested according to Method OECD 301D and determined to be readily biodegradable.

Colonial SOS is a highly biodegradable wetting agent that is stable under varying conditions of pH and temperature.

Cola®Trope INC-K has been developed for use in systems with high electrolytes. Similar to our Cola®Trope INC, it is used to couple nonionics and other surfactants into highly built products. Cola®Trope INC-K is a very versatile, low foaming surfactant and hydrotrope in one molecule. Cola®Trope INC-K is the potassium salt alternative to our Cola®Trope INC product. It is useful in formulations where the sodium salt ion needs to be avoided. In addition, Cola®Trope INC-K has a lower Krafft point than Cola®Trope INC.

Cola®Teric HLA and Cola®Teric HFA are high foaming amphoteric surfactants that provide outstanding hydrotroping properties in high electrolyte systems. Additionally, they contribute to wetting, detergency, and rinsibility. These high foaming amphoterics produce a stable, slow draining, dense foam, and is ideally suited for use in household and industrial cleaners, mild personal care cleansers, and oilfield related foamers.

Cola®Teric CBS is an amphoteric surfactant in the sultaine class. It exhibits outstanding surface activity, wetting, foaming, and compatibility in a wide variety of applications. Due to its amphoteric nature, this product is compatible with cationic, anionic, and nonionic surfactants. The compatibility and stability of formulations containing Cola®Teric CBS are maintained over a broad pH range.

Cola®Trope INC is a versatile, low foaming anionic surfactant/hydrotrope and designed for the use of coupling nonionics and other surfactants into products where high levels of electrolytes may be present. It is especially effective in formulating alkaline built liquid detergent concentrates. This product is not generally intended for low pH systems.

Cola®Trope CA is a highly effective hydrotrope with excellent environmental attributes. Many hydrotropes currently on the market are made from environmentally unfriendly materials. For the formulator who is formulating safer, "green" products, hydrotropes such as SXS and cresylic acid based hydrotropes are no longer safe and environmentally acceptable. Cola®Trope CA is derived from natural sources and are non-petroleum based materials and more effective than sodium xylene sulfonate. It has excellent wetting and detergency properties and soluble in up to 20% KOH and 15% NaOH. Cola®Trope CA is virtually non-foaming making it suitable for spray applications. It is recommended for neutral to alkaline pH formulations and not to be used in acid pH formulations.

Cola®Dol 91-6 is a high active nonionic surfactant. Cola®Dol 91-6 is stable in both aqueous acidic and alkaline solutions, allowing for application in a wide range of products.

Cola®Mulse CS205 is a non-ionic emulsifier designed to enhance water sheeting and aid drying in rinse aid formulations. Cola®Mulse CS205 may be used as a co-emulsifier with Cola®Mulse CS300.

Cola®Mid 16 is a unique non-ionic surfactant for use in a variety of applications. Cola®Mid 16 has excellent corrosion inhibition properties on metal and has use in lubricants as both an emulsifier and a corrosion inhibitor. Cola®Mid 16 is also useful in preparing water-in-oil invert emulsions for polymerization, leading to high molecular weight polymers such as those used in water treatment. Cola®Mid 16 is also useful as a low HLB emulsifier in all continuous phase emulsions.

Cola®Liquid DC-2 is a (modified 2:1 fatty acid diisopropanolamide) DEA-free fatty amide designed for effective detergency and wetting while demonstrating controlled foaming.

Cola®Mulse CS400 is a non-flammable cationic emulsifier designed to create micro emulsions of mineral seal oil and other hydrophobes in water. The combination of this powerful cationic surfactant with the mineral seal oil makes very effective drying agents for automatic car wash systems to remove water with balanced beading and sheeting actions.

Silicone Wax Additive

Cola®Teric CA-35 is a high foaming amphoteric surfactant with a low toxicity profile, making it suitable for a wide range of applications. It produces high foam and dense lather. This product is recommended for liquid soaps, shampoos, car washes, and foaming caustic cleaners.

Cola®Quat C15 is a naturally-derived ethoxylated quaternary amine at nearly 100% active. When used with other surfactants - especially nonionic surfactants - Cola®Quat C15 will greatly boost degreasing and cleaning performance. It will also help stabilize foam and improve streak-free rinsing. The ethosulfate quats will help reduce the corrosivity found with chloride quats. Cola®Quat C15 may not be compatible with anionic surfactants at high concentrations.

Cola®Mine 1-76 is a modified 2:1 fatty acid diethanolamide that provides effective detergency and wetting while demonstrating controlled foaming. It is ideal for use in hard surface cleaners, chain lubricants, and vibratory finishing compounds.

Cola®Mulse C-356 and Cola®Mulse D-356 are effective emulsifiers for aromatic solvents, kerosene, and mineral spirits. They provide excellent wetting, detergency, and rinsing properties to solvent-based cleaners. These products are ideally suited for use in paint strippers, heavy-duty degreasers, and oil rig cleaners.

Cola®Fax 3386 is a 100% active, low foaming, aromatic based, phosphate ester with characteristics of low coefficient of friction, corrosion inhibition, high electrolyte compatibility, hydrotroping, and low toxicity. It is used in metal cleaning, chain lubricating, hydrotroping, maintenance cleaning.