Products

Poly Suga®Mulse D9 is a PEG-free, nonionic fragrance solubilizer made from 100% biobased raw materials. It is hydrophilic, freely soluble or dispersible in water, and soluble in varying degrees in organic liquids. Poly Suga®Mulse D9 is used for oil-in-water (O/W) emulsification, dispersion or solubilization of fragrances and all types of oils. It is compatible with nonionic, cationic and anionic surfactants and is effective in systems with relatively high levels of electrolyte, acid, or base.

Cola®Cap MA259 is a 100% active, low-foaming surfactant that provides excellent product color and chemical stability over a wide pH range. Cola®Cap MA259 offers optimization of detergency, wetting and food soil defoaming characteristics. Cola®Cap MA259 incorporates a capping group that provides unique functionality, greater biodegradability and does not interfere with wetting, detergency or surface activity. It is also structurally suffi cient to provide good food soil defoaming properties. Cola®Cap MA259 develops low foaming properties without the use of propylene oxide capping that potentially could inhibit biodegradation.

Cola®Mulse CS300 is a cationic emulsifier designed to enhance water beading and aid drying in rinse aid formulations. To improve sheeting beading balance, Cola®Mulse CS400 or Cola®Mulse CS205 may be used as coemulsifiers.

Cola®Lux SO provides good detergency, exceptionally high foaming, and viscosity forming properties. It can be formulated with anionic, nonionic, and cationic materials. This product is recommended for shampoos, bubble baths, hand soaps, air conditioners, cream rinses, creams and lotions, shaving creams, household products, and industrial and institutional products.

Cola®Liquid DT-2 is a non-ionic 2:1 diisopropanolamine (DIPA) amide of tall oil fatty acids. Colonial Chemical’s Cola®Liquid products consist of completely liquid, consumer acceptable non-DEA amides that perform like traditional alkanolamide surfactants. Cola®Liquid DT-2 can be used as a substitute for 2:1 DEA amides in any application where traditional alkanolamide surfactants have been used. Cola®Liquid DT-2 is effective in a wide variety of household and industrial products.

Cola®Terge 102 is a high performance blend of surfactants designed for use in water-based degreasing and hard surface cleaning applications. It is a fast wetter for penetrating soils and surfaces and a powerful emulsifier while holding soils in suspension. Cola®Terge 102 is suitable for use in alkaline, acidic and general purpose cleaners. The simple combination of Cola®Terge 102 with or without builders makes an excellent water-based degreaser.

Cola®Cap MA139 is a 100% active, low-foaming surfactant that provides excellent product color and chemical stability over a wide pH range. Cola®Cap MA139 offers optimization of detergency, wetting and food soil defoaming characteristics. Cola®Cap MA139 incorporates a capping group that provides unique functionality, greater biodegradability and does not interfere with wetting, detergency or surface activity. It is also structurally sufficient to provide good food soil defoaming properties. Cola®Cap MA139 develops low foaming properties without the use of propylene oxide capping that potentially could inhibit biodegradation.

Cola®Solv TES is a cationic additive for improving rinse and drying, reducing static charges on surfaces, preventing corrosion adding lubrication to textiles and brushes and applying shine to hard surfaces.

Cola®Wet sulfosuccinates, chemically classified as dialkyl sulfosuccinates, are anionic surfactants that provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing. Cola®Wet sulfosuccinates are suitable for use in a broad range of applications such as wetting agents, in cosmetics, detergents, agricultural, mining and textile products, as well as emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations.

Cola®Wet surfactants are chemically classified as dialkyl sulfosuccinates.  These anionic surfactants provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing. Cola®Wet products are suitable for use in a broad range of applications such as wetting agents, detergents, agricultural, mining and textile products, as well as, emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations.

Cola®Mid 3458 is a linoleic diethanolamide (INCI Designation: Linoleamide DEA) designed to provide excellent foam stabilization, viscosity building, conditioning, and emulsification properties in shampoos, skin cleansers, and other personal care products. For industrial applications, it is an effective thickener and emulsifier for a variety of oils and is useful in the development of micro-emulsion detergent and solvent-based cleaners.

Cola®Dol 91-6 is a high active nonionic surfactant. Cola®Dol 91-6 is stable in both aqueous acidic and alkaline solutions, allowing for application in a wide range of products.

Cola®Mid 16 is a unique non-ionic surfactant for use in a variety of applications. Cola®Mid 16 has excellent corrosion inhibition properties on metal and has use in lubricants as both an emulsifier and a corrosion inhibitor. Cola®Mid 16 is also useful in preparing water-in-oil invert emulsions for polymerization, leading to high molecular weight polymers such as those used in water treatment. Cola®Mid 16 is also useful as a low HLB emulsifier in all continuous phase emulsions.

The Suga®Fax materials are derived from alkyl polyglucosides, a renewable resource made from coconut oil and corn syrup. These starting materials provide biodegradable, mild surfactants that can function in extreme conditions for a variety of consumer and industrial applications. Because of their safety, Suga®Fax products are excellent in consumer and industrial products, dramatically lowering the risk to human exposure. Suga®Fax surfactants are recommended wherever wetting, hydrotroping, and detergency are needed in a consumer or industrial product.

Cola®Mulse CS205 is a non-ionic emulsifier designed to enhance water sheeting and aid drying in rinse aid formulations. Cola®Mulse CS205 may be used as a co-emulsifier with Cola®Mulse CS300.

Cola®Fax 3383 is an organic phosphate ester with ultra low foam. With 50 active potassium salt, it is designed for use as a hydrotrope and/or solubilizer for conventional and low-foam nonionics in alkaline systems. It is useful in conventional and low-foam nonionics in alkaline systems. It is also used in place of SXS to solubilize LAS and alkanolamide formulas such as liquid hand dishwashes.

Cola®Mulse CS400 is a non-flammable cationic emulsifier designed to create micro emulsions of mineral seal oil and other hydrophobes in water. The combination of this powerful cationic surfactant with the mineral seal oil makes very effective drying agents for automatic car wash systems to remove water with balanced beading and sheeting actions.

Cola®Quat C15 is a naturally-derived ethoxylated quaternary amine at nearly 100% active. When used with other surfactants - especially nonionic surfactants - Cola®Quat C15 will greatly boost degreasing and cleaning performance. It will also help stabilize foam and improve streak-free rinsing. The ethosulfate quats will help reduce the corrosivity found with chloride quats. Cola®Quat C15 may not be compatible with anionic surfactants at high concentrations.

Cola®Mulse C-356 and Cola®Mulse D-356 are effective emulsifiers for aromatic solvents, kerosene, and mineral spirits. They provide excellent wetting, detergency, and rinsing properties to solvent-based cleaners. These products are ideally suited for use in paint strippers, heavy-duty degreasers, and oil rig cleaners.

Cola®Lux LO is an amine oxide that provides good detergency, exceptionally high foaming, and viscosity forming properties. This product is recommended for shampoos, handsoaps, bath products, creams and lotions, hair conditioners, dishwashing detergents, cleansers, and hard surface cleansers.

Cola®Wet surfactants, chemically classified as dialkyl sulfosuccinates, are anionic surfactants that provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing. Cola®Wet surfactants are suitable for use in a broad range of applications such as wetting agents, in cosmetics, detergents, agricultural, mining and textile products, as well as emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations.

Cola®Mid HPC has been developed specifically to increase flash foam. At concentrations of 1 - 3%, in a variety of cosmetic products such as shampoos, bubble baths, bath oils, etc. A significant increase in flash foam will be noted. Cola®Mid HPC also augments the foam boosting and foam stabilization properties of other amides without significantly affecting viscosities. Cola®Mid HPC is an effective emulsifier and solubilizing agent in cosmetic creams, lotions and other toiletry products. As a result of these functions, it can also be used as a viscosity control agent in these applications.

Cola®Mid AL is a premium 100% active, liquid "super" amide. It is highly recommended for use in all types of shampoos, cleansers, bubble baths, and liquid detergents formulations where quality performance, extreme mildness and maximum ease of handling are required. This product is an outstanding solubilizer and coupler for essential oils and other additives, and offers excellent stability in systems ranging from pH 4 to 11.

Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications.

Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications.

Cola®Fax 3373, a low foaming, water soluble, aliphatic-based phosphate ester, is an effective hydrotrope/solubilizer for conventional and low foam nonionic surfactants in alkaline systems. Additionally, it demonstrates excellent compatibility in sodium hypochlorite formulations. This product is recommended for use in spray, soak tank, and in-place pipeline cleaners.

Cola® Det DEF-45 is a DEA-free citrus oil emulsifier designed to yield micro-emulsions of non-polar solvents. A wide range of hard surface cleaners, waterless hand cleaners, and degreasers can be formulated with this product. It is most effective in blends containing d-limonene, terpenes, naphthenic pine oils and Exxate type solvents. Appropriate blends of these oils can produce highly synergistic cleaners.

Cola®Mine CDM is a modified 2:1 cocamide diethanolamide that functions as an excellent detergent and emulsifier. The amide, diethanolamine, and soap content vary in each Cola®Mine product depending on the intended function. Cola®Mine CDM provides excellent soil dispersing, potent wetting, good lubricity, and rust inhibition characteristics in hard surface cleaners, chain lubricants, and vibratory finishing compounds.

Colonial AOS-40 is a pale yellow to light amber aqueous solution of sodium C14-16 alpha olefin sulfonate. Colonial AOS-40 combines the advantages of high foaming power, good emulsification, mildness to the skin, and excellent lime soap dispersion to give the formulator maximum flexibility in the preparation of light and heavy-duty cleaners. It is also suitable for use in acidic formulations such as those containing alpha hydroxyl acids or salicylic acid.

Cola®Mulse CS450 is a non-flammable cationic emulsifier designed to create microemulsions of mineral seal oil and other hydrophobes in water. The combination of this powerful cationic surfactant with the mineral seal oil makes very effective drying agents for automatic car wash systems to remove water with balanced beading and sheeting actions.

Cola®Teric CAPB is an amphoteric derived from caprylic imidazoline, and can be used in machine dishwashing and steam cleaning formulations while providing low foam. Cola®Teric CAPB will also find use in hard surface cleaning formulations because of its excellent wetting properties. Cola®Teric CAPB has excellent stability in strongly alkaline aacid systems. Cola®Teric CAPB is compatible with most anionic, cationic and non-ionic surfactants and is an excellent solubilizer for higher molecular weight surfactants.

Cola®Fax 3375 is a 95% active phosphate ester. Cola®Fax 3375 is effective as a low foam detergent and hydrotrope. Any foam that is generated in use is fast breaking. Cola®Fax 3375 is especially effective in coupling low foam or capped nonionics into liquid alkaline cleaners.

Cola®Mulse CA-15 is a multifunctional amine alkoxylate used as an emulsifi er and lubricant in metalworking formulations. Cola®Mulse CA-15 may also used in textile applications for antistatic properties. The polyoxyethylated fatty amines are mildly cationic surfactants that become more nonionic in nature with increasing ethylene oxide content. Cola®Mulse CA-15 is substantive to metals, glass, textiles, plastics, and clays.

Cola®Dol 173B is a moderate foam nonionic performance blend of ethoxylated alcohols effective in transportation cleaning and industrial degreasing. The combination of ethoxylates provides excellent wetting, emulsification and detergency.

Cola® Cor 635 is a DEA-free fatty acid alkanolamide hat can be used as a corrosion inhibitor, lubricant, and secondary emulsifier for aqueous metalworking fluids. Cola® Cor 635 can be substituted for typical DEA-containing products used in synthetic and semi-synthetic systems. At use levels of 3-20%, Cola®Cor 635 offers superior corrosion protection and lubrication properties and can be combined with other anionic surfactants to create low-foaming systems. For emulsifiable oils, Cola®Cor 635 can be used to increase emulsion stability, corrosion protection, hard water stability, and storage life.

The Suga®Fax materials are derived from alkyl polyglucosides, a renewable resource made from coconut oil and corn syrup. These starting materials provide biodegradable, mild surfactants that can function in extreme conditions for a variety of consumer and industrial applications. Because of their safety, Suga®Fax products are excellent in consumer and industrial products, dramatically lowering the risk to human exposure. Suga®Fax surfactants are recommended wherever wetting, hydrotroping, and detergency are needed in a consumer or industrial product.