Products

Cola®Wet sulfosuccinates, chemically classified as dialkyl sulfosuccinates, are anionic surfactants that provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing. Cola®Wets are suitable for use in a broad range of applications such as wetting agents, in cosmetics, detergents, agricultural, mining and textile products, as well as emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations. Cola®Wet MA-80 surfactant is an anionic surface tension depressant and an emulsifying, dispersing and solubilizing agent exhibiting high electrolyte tolerance. It promotes penetration and spreading of organic liquids as films.

Cola®Cap MA259 is a 100% active, low-foaming surfactant that provides excellent product color and chemical stability over a wide pH range. Cola®Cap MA259 offers optimization of detergency, wetting and food soil defoaming characteristics. Cola®Cap MA259 incorporates a capping group that provides unique functionality, greater biodegradability and does not interfere with wetting, detergency or surface activity. It is also structurally suffi cient to provide good food soil defoaming properties. Cola®Cap MA259 develops low foaming properties without the use of propylene oxide capping that potentially could inhibit biodegradation.

Cola®Terge 226 is an optimized blend of nonionic and cationic surfactants, intended to be used for water-based degreasing. A cleaning formulation based on Cola®Terge 226 can often replace a solvent because of the efficient cleaning effect on grease and oil. When an oily soil contains a lot of soot and pigments, the cleaning effect will often be much better than with conventional products. A water-based alkaline cleaning formulation based using Cola®Terge 226 and appropriate complexing agent is a significant improvement compared with conventional alkaline cleaners.

Cola®Mulse CS300 is a cationic emulsifier designed to enhance water beading and aid drying in rinse aid formulations. To improve sheeting beading balance, Cola®Mulse CS400 or Cola®Mulse CS205 may be used as coemulsifiers.

Cola®Liquid DT-2 is a non-ionic 2:1 diisopropanolamine (DIPA) amide of tall oil fatty acids. Colonial Chemical’s Cola®Liquid products consist of completely liquid, consumer acceptable non-DEA amides that perform like traditional alkanolamide surfactants. Cola®Liquid DT-2 can be used as a substitute for 2:1 DEA amides in any application where traditional alkanolamide surfactants have been used. Cola®Liquid DT-2 is effective in a wide variety of household and industrial products.

Cola®Terge 102 is a high performance blend of surfactants designed for use in water-based degreasing and hard surface cleaning applications. It is a fast wetter for penetrating soils and surfaces and a powerful emulsifier while holding soils in suspension. Cola®Terge 102 is suitable for use in alkaline, acidic and general purpose cleaners. The simple combination of Cola®Terge 102 with or without builders makes an excellent water-based degreaser.

Suga®Nate 100NC is a surfactant based on the renewable resources of corn and coconut. It is extremely mild when tested against other traditional primary personal cleansing surfactants such as sodium lauryl sulfate, sodium coco sulfate, sodium lauryl ether sulfate and alpha olefin sulfonate. This product is recommended for shampoos, bath gels, body washes, facial cleansers, makeup removers, baby products, and bath foams.

Cola®Cap MA139 is a 100% active, low-foaming surfactant that provides excellent product color and chemical stability over a wide pH range. Cola®Cap MA139 offers optimization of detergency, wetting and food soil defoaming characteristics. Cola®Cap MA139 incorporates a capping group that provides unique functionality, greater biodegradability and does not interfere with wetting, detergency or surface activity. It is also structurally sufficient to provide good food soil defoaming properties. Cola®Cap MA139 develops low foaming properties without the use of propylene oxide capping that potentially could inhibit biodegradation.

Cola®Solv TES is a cationic additive for improving rinse and drying, reducing static charges on surfaces, preventing corrosion adding lubrication to textiles and brushes and applying shine to hard surfaces.

Cola®Dry DAB is a water-soluble wax additive used in vehicle care formulations for improved shine and surface protection. Cola®Dry DAB is non-flammable and can be formulated to create high-performance protectants for both exterior and interior vehicle surfaces.

Cola®Wet sulfosuccinates, chemically classified as dialkyl sulfosuccinates, are anionic surfactants that provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing. Cola®Wet sulfosuccinates are suitable for use in a broad range of applications such as wetting agents, in cosmetics, detergents, agricultural, mining and textile products, as well as emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations.

Colonial SDS-40 is a sodium decyl sulfate for use in a variety of industries including industrial, institutional cleaning industry, fire fighting foams, emulsion polymers, and personal care. Colonial SDS-40 acts as a dispersing wetting agent and emulsifier

Cola®Wet surfactants are chemically classified as dialkyl sulfosuccinates.  These anionic surfactants provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing. Cola®Wet products are suitable for use in a broad range of applications such as wetting agents, detergents, agricultural, mining and textile products, as well as, emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations.

Cola®Mid 3458 is a linoleic diethanolamide (INCI Designation: Linoleamide DEA) designed to provide excellent foam stabilization, viscosity building, conditioning, and emulsification properties in shampoos, skin cleansers, and other personal care products. For industrial applications, it is an effective thickener and emulsifier for a variety of oils and is useful in the development of micro-emulsion detergent and solvent-based cleaners.

Cola®Dol 91-6 is a high active nonionic surfactant. Cola®Dol 91-6 is stable in both aqueous acidic and alkaline solutions, allowing for application in a wide range of products.

Cola®Mid 16 is a unique non-ionic surfactant for use in a variety of applications. Cola®Mid 16 has excellent corrosion inhibition properties on metal and has use in lubricants as both an emulsifier and a corrosion inhibitor. Cola®Mid 16 is also useful in preparing water-in-oil invert emulsions for polymerization, leading to high molecular weight polymers such as those used in water treatment. Cola®Mid 16 is also useful as a low HLB emulsifier in all continuous phase emulsions.

Cola®Mulse CS400 is a non-flammable cationic emulsifier designed to create micro emulsions of mineral seal oil and other hydrophobes in water. The combination of this powerful cationic surfactant with the mineral seal oil makes very effective drying agents for automatic car wash systems to remove water with balanced beading and sheeting actions.

Cola®Mulse CS205 is a non-ionic emulsifier designed to enhance water sheeting and aid drying in rinse aid formulations. Cola®Mulse CS205 may be used as a co-emulsifier with Cola®Mulse CS300.

The Suga®Fax materials are derived from alkyl polyglucosides, a renewable resource made from coconut oil and corn syrup. These starting materials provide biodegradable, mild surfactants that can function in extreme conditions for a variety of consumer and industrial applications. Because of their safety, Suga®Fax products are excellent in consumer and industrial products, dramatically lowering the risk to human exposure. Suga®Fax surfactants are recommended wherever wetting, hydrotroping, and detergency are needed in a consumer or industrial product.

Cola®Quat C15 is a naturally-derived ethoxylated quaternary amine at nearly 100% active. When used with other surfactants - especially nonionic surfactants - Cola®Quat C15 will greatly boost degreasing and cleaning performance. It will also help stabilize foam and improve streak-free rinsing. The ethosulfate quats will help reduce the corrosivity found with chloride quats. Cola®Quat C15 may not be compatible with anionic surfactants at high concentrations.

Cola®Mulse C-356 and Cola®Mulse D-356 are effective emulsifiers for aromatic solvents, kerosene, and mineral spirits. They provide excellent wetting, detergency, and rinsing properties to solvent-based cleaners. These products are ideally suited for use in paint strippers, heavy-duty degreasers, and oil rig cleaners.

Cola®Liquid DT is a non-ionic 1:1 diisopropanolamine (DIPA) amide of tall oil fatty acids. Colonial Chemical’s Cola®Liquid products consist of completely liquid, consumer acceptable non-DEA amides that perform like traditional alkanolamide surfactants. Cola®Liquid DT provides viscosity building and foam stabilizing properties. The product is liquid and very mild to eyes and skin. Cola®Liquid DT can be used as a substitute for 1:1 DEA amides in any application where traditional alkanolamide surfactants have been used. Cola®Liquid DT is effective in a wide variety of industrial products.

Cola®Wet surfactants, chemically classified as dialkyl sulfosuccinates, are anionic surfactants that provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing. Cola®Wet surfactants are suitable for use in a broad range of applications such as wetting agents, in cosmetics, detergents, agricultural, mining and textile products, as well as emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations.

Cola®Mid HPC has been developed specifically to increase flash foam. At concentrations of 1 - 3%, in a variety of cosmetic products such as shampoos, bubble baths, bath oils, etc. A significant increase in flash foam will be noted. Cola®Mid HPC also augments the foam boosting and foam stabilization properties of other amides without significantly affecting viscosities. Cola®Mid HPC is an effective emulsifier and solubilizing agent in cosmetic creams, lotions and other toiletry products. As a result of these functions, it can also be used as a viscosity control agent in these applications.

Cola®Mine CDM is a modified 2:1 cocamide diethanolamide that functions as an excellent detergent and emulsifier. The amide, diethanolamine, and soap content vary in each Cola®Mine product depending on the intended function. Cola®Mine CDM provides excellent soil dispersing, potent wetting, good lubricity, and rust inhibition characteristics in hard surface cleaners, chain lubricants, and vibratory finishing compounds.

Cola® Det DEF-45 is a DEA-free citrus oil emulsifier designed to yield micro-emulsions of non-polar solvents. A wide range of hard surface cleaners, waterless hand cleaners, and degreasers can be formulated with this product. It is most effective in blends containing d-limonene, terpenes, naphthenic pine oils and Exxate type solvents. Appropriate blends of these oils can produce highly synergistic cleaners.

Cola®Mulse CS450 is a non-flammable cationic emulsifier designed to create microemulsions of mineral seal oil and other hydrophobes in water. The combination of this powerful cationic surfactant with the mineral seal oil makes very effective drying agents for automatic car wash systems to remove water with balanced beading and sheeting actions.

Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications.

Cola®Liquid DCT is a Modified Cocamide DIPA and Tall Oil Soap. Cola®Liquid DCT is an excellent substitute for 2:1 DEA amides. Colonial Chemical’s Cola®Liquid products consist of completely liquid, consumer acceptable non-DEA amides that perform like traditional alkanolamide surfactants. Cola®Liquid DCT can be used in any application where traditional alkanolamide surfactants have been used.

Cola®Mulse CA-15 is a multifunctional amine alkoxylate used as an emulsifi er and lubricant in metalworking formulations. Cola®Mulse CA-15 may also used in textile applications for antistatic properties. The polyoxyethylated fatty amines are mildly cationic surfactants that become more nonionic in nature with increasing ethylene oxide content. Cola®Mulse CA-15 is substantive to metals, glass, textiles, plastics, and clays.

Cola®Nol 14 is a PEG-free distilled polyglycerol ester based on vegetable oleic acid. It is an excellent emulsifier enabling water and oil to mix with good heat and cold stability. Cola®Nol 14 is compatible with all kinds of cosmetic oils and active ingredients with very pleasant application properties.

Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications.

Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications.

The Suga®Fax materials are derived from alkyl polyglucosides, a renewable resource made from coconut oil and corn syrup. These starting materials provide biodegradable, mild surfactants that can function in extreme conditions for a variety of consumer and industrial applications. Because of their safety, Suga®Fax products are excellent in consumer and industrial products, dramatically lowering the risk to human exposure. Suga®Fax surfactants are recommended wherever wetting, hydrotroping, and detergency are needed in a consumer or industrial product.

Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications. Cola®Zolines, chemically described as 1–hydroxyethyl 2–alkyl imidazolines, are classified as cationic surface active agents. Cola®Zolines and their acid salts offer the following functional properties: wetting, emulsifying, detergency, thickening, moisture displacing, corrosion inhibiting, and antistatic effects. These functional properties are useful in agricultural emulsions, industrial cleaners, paints/coatings, plastics, and petroleum applications.

The Suga®Fax materials are derived from alkyl polyglucosides, a renewable resource made from coconut oil and corn syrup. These starting materials provide biodegradable, mild surfactants that can function in extreme conditions for a variety of consumer and industrial applications. Because of their safety, Suga®Fax products are excellent in consumer and industrial products, dramatically lowering the risk to human exposure. Suga®Fax surfactants are recommended wherever wetting, hydrotroping, and detergency are needed in a consumer or industrial product.