Products

Consolidated Aircraft Coatings UV Blocker is used as an additive to poly-tone paint to partially block uv radiation. It does not replace poly-spray as a full uv blocker. Do not use this product with an aero-thane. This product should only be used in the most weight-restrictive ultralight applications. It is not a substitute for silver poly-spray and is much less effective.

Consolidated Aircraft Coatings Float Lacquer is a time-honored silver coating for aircraft floats. Although it can be applied by brush, it is more suitable for spraying. Float Lacquer is a classic, low-tech way of coating floats. Although its service life is far less than today's polyurethanes, its ease of application and repair make it a useful product. Apply over epoxy-primed metal or over old float lacquer.

Consolidated Aircraft Coatings Aero-Thane 100 Clear is a tough, flexible, two-part clear polyurethane recommended to retain the original brilliance of polished aluminum. This product is not recommended when the aircraft will be exposed to severe environmental pollution.

Consolidated Aircraft Coatings UV-550 Urethane Varnish is a clear, high-gloss, exterior and interior varnish. It is the most durable varnish available.

Consolidated Aircraft Coatings Flattener is a liquid product with silica flattener added. It is used to reduce the gloss of Poly-Tone, Enamel, Ranthane and Aero-Thane. Adding Flattener in increasing amounts can result in semi-gloss or full military flat, depending upon the percentage added. Flattening is an inexact science; it is always best to spray a sample then let it dry to ensure you are achieving the desired flatness.