Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Cure Method
- Mixing Instructions
Premix Part A in original container prior to adding curing agent. Add Part B to Part A and mix until uniform. Use with Part B-187 when high temperature performance is desired. NOTE: It is not unusual for crystallization of the B-187 to occur. Warm to 40-45°C in a water bath to return the material to it's original viscosity. The crystallization of the catalyst does not effect the performance of the product in any way. To prevent recrystallization, store the B-187 at temperatures between 35-45°C.
Properties
- Color
- Appearance
- Amber, Black
- Component A
- Typical Properties
- Component B
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Viscosity | 7500 | cps | - |
Mix Ratio (by weight) | 100 | - | - |
Value | Units | Test Method / Conditions | |
Pot Life | 4 hours | - | - |
Pot Life | min. 4 Hrs | - | - |
Viscosity | 3000 | cps | - |
Value | Units | Test Method / Conditions | |
Viscosity | 500 | cps | - |
Mix Ratio (by weight) | 3 | - | - |
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.51 | - | - |
Hardness | 85 | Shore D | - |
Coefficient of Thermal Expansion | 22 | in/in °C x 10^-6 | - |
Thermal Conduction | 1.28 | W/m-K | - |
Cure Shrinkage | 0.189 | % | - |
Heat Distortion Temperature | 115 | °C | - |
Tensile Strength | 9600 | psi | - |
Water Absorption | max. 0.22 | % | - |
Dielectric Strength | 475 | volts/mil | - |
Volume Resistivity | 1x 10^15 | Ω - cm | - |
Power Factor (60 HZ) | 0.028 | - | - |
Dielectric Constant (60 HZ) | 4.3 | - | - |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Curing Instructions
Handling Properties: 30 mins @ 80°C Full Cure: 1 hr @ 80°C or 30 mins @ 100°C