Products

Divinycell F50 foam is a recyclable, prepreg compatible sandwich core offering excellent Fire, Smoke and Toxicity (FST) properties, good mechanicals and processing characteristics. It meets the US and European regulatory requirements for commercial aircraft interiors. Other key features include vacuum bag processing up to 220°C and matched tooling and press processing up to 220°C, exceptional fatigue life, good chemical resistance and excellent heat aging at 180°C. Divinycell F50 is compatible with most common aerospace composite manufacturing processes.

Divinycell HCP grade meets the demand for a high performance, low density buoyancy material with excellent characteristics. It is widely used in submarines, subsea buoyancy units, ROVs, diving bells and impact protection structures. As a result of its excellent hydraulic compressive properties and closed cell structure, it has very low buoyancy loss and water absorption under long-term loading conditions. HCP stands for Hydraulic Crush Point and is defined as the point of pressure in Bar, where the material when subjected to an increasing pressure of 1-2 Bar/sec has lost 5% of its initial volume. The design of subsea buoyancy applications is complex and consideration has to be given to the required buoyancy loss and updrift over the expected lifetime and service conditions, with respect to long and short term hydraulic compressive creep, water absorption and hydraulic fatigue. Please contact Diab Technical Services for design proposal.

Divinycell HCP grade meets the demand for a high performance, low density buoyancy material with excellent characteristics. It is widely used in submarines, subsea buoyancy units, ROVs, diving bells and impact protection structures. As a result of its excellent hydraulic compressive properties and closed cell structure, it has very low buoyancy loss and water absorption under long-term loading conditions. HCP stands for Hydraulic Crush Point and is defined as the point of pressure in Bar, where the material when subjected to an increasing pressure of 1-2 Bar/sec has lost 5% of its initial volume. The design of subsea buoyancy applications is complex and consideration has to be given to the required buoyancy loss and updrift over the expected lifetime and service conditions, with respect to long and short term hydraulic compressive creep, water absorption and hydraulic fatigue. Please contact Diab Technical Services for design proposal.

Divinycell HP has been developed to meet demands in high temperature systems, and low temperature prepreg systems. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell HP´s elevated temperature performance also extends to its ‘in service’ life as it will retain a high percentage of its mechanical properties despite exposure to high ambient temperatures. It offers high properties in all significant areas including mechanical performance, elongation to break, ductility, adhesion/peel strength, fracture toughness and dimensional stability. Other key features of Divinycell HP include excellent chemical resistance, low water absorption and good thermal/acoustic insulation.

Divinycell P is a closed-cell PET structural core with excellent fire, smoke and toxicity behavior. It is thermoplastic and recyclable, offering good mechanical properties, high chemical resistance and does not absorb water. Divinycell P is ideal but not limited to applications requiring demanding FST properties like public transport, architecture or commercial marine. Due to its good dimensional stability at elevated temperatures, Divinycell P can be processed with medium temperature pre-preg systems and it is compatible with most commonly used resin and manufacturing systems. Divinycell P is easy to thermoform, cut or mill.

Divinycell P is a closed-cell PET structural core with excellent fire, smoke and toxicity behavior. It is thermoplastic and recyclable, offering good mechanical properties, high chemical resistance and does not absorb water. Divinycell P is ideal but not limited to applications requiring demanding FST properties like public transport, architecture or commercial marine. Due to its good dimensional stability at elevated temperatures, Divinycell P can be processed with medium temperature pre-preg systems and it is compatible with most commonly used resin and manufacturing systems. Divinycell P is easy to thermoform, cut or mill.

Divinycell F50 foam is a recyclable, prepreg compatible sandwich core offering excellent Fire, Smoke and Toxicity (FST) properties, good mechanicals and processing characteristics. It meets the US and European regulatory requirements for commercial aircraft interiors. Other key features include vacuum bag processing up to 220°C and matched tooling and press processing up to 220°C, exceptional fatigue life, good chemical resistance and excellent heat aging at 180°C. Divinycell F50 is compatible with most common aerospace composite manufacturing processes.

Divinycell HP has been developed to meet demands in high temperature systems, and low temperature prepreg systems. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell HP´s elevated temperature performance also extends to its ‘in service’ life as it will retain a high percentage of its mechanical properties despite exposure to high ambient temperatures. It offers high properties in all significant areas including mechanical performance, elongation to break, ductility, adhesion/peel strength, fracture toughness and dimensional stability. Other key features of Divinycell HP include excellent chemical resistance, low water absorption and good thermal/acoustic insulation.

Divinycell HP has been developed to meet demands in high temperature systems, and low temperature prepreg systems. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell HP´s elevated temperature performance also extends to its ‘in service’ life as it will retain a high percentage of its mechanical properties despite exposure to high ambient temperatures. It offers high properties in all significant areas including mechanical performance, elongation to break, ductility, adhesion/peel strength, fracture toughness and dimensional stability. Other key features of Divinycell HP include excellent chemical resistance, low water absorption and good thermal/acoustic insulation.

Divinycell P is a closed-cell PET structural core with excellent fire, smoke and toxicity behavior. It is thermoplastic and recyclable, offering good mechanical properties, high chemical resistance and does not absorb water. Divinycell P is ideal but not limited to applications requiring demanding FST properties like public transport, architecture or commercial marine. Due to its good dimensional stability at elevated temperatures, Divinycell P can be processed with medium temperature pre-preg systems and it is compatible with most commonly used resin and manufacturing systems. Divinycell P is easy to thermoform, cut or mill.

Divinycell PX is based on PET, which makes it to a recyclable, thermoplastic sandwich core material. Divinycell PX provides excellent FST (fire, smoke & toxicity) properties, high temperature performance, very good fatigue properties, good mechanical characteristics and chemical resistance. It also offers excellent acoustic/thermal insulation properties and low water absorption. Divinycell PX is particularly ideal for public transportation and industrial applications. The energy efficiency of a Divinycell PX sandwich makes it ideal for transport applications such as interior paneling, floors and exterior panels for trains, trams, busses and coaches. In the industrial/ construction market, the good mechanical and FST properties of Divinycell PX allows it to be used for a wide variety of applications such as domes, architectural claddings and industrial housings.

Divinycell F50 foam is a recyclable, prepreg compatible sandwich core offering excellent Fire, Smoke and Toxicity (FST) properties, good mechanicals and processing characteristics. It meets the US and European regulatory requirements for commercial aircraft interiors. Other key features include vacuum bag processing up to 220°C and matched tooling and press processing up to 220°C, exceptional fatigue life, good chemical resistance and excellent heat aging at 180°C. Divinycell F50 is compatible with most common aerospace composite manufacturing processes.

Divinycell PX is based on PET, which makes it to a recyclable, thermoplastic sandwich core material. Divinycell PX provides excellent FST (fire, smoke & toxicity) properties, high temperature performance, very good fatigue properties, good mechanical characteristics and chemical resistance. It also offers excellent acoustic/thermal insulation properties and low water absorption. Divinycell PX is particularly ideal for public transportation and industrial applications. The energy efficiency of a Divinycell PX sandwich makes it ideal for transport applications such as interior paneling, floors and exterior panels for trains, trams, busses and coaches. In the industrial/ construction market, the good mechanical and FST properties of Divinycell PX allows it to be used for a wide variety of applications such as domes, architectural claddings and industrial housings.

Divinycell HCP grade meets the demand for a high performance, low density buoyancy material with excellent characteristics. It is widely used in submarines, subsea buoyancy units, ROVs, diving bells and impact protection structures. As a result of its excellent hydraulic compressive properties and closed cell structure, it has very low buoyancy loss and water absorption under long-term loading conditions. HCP stands for Hydraulic Crush Point and is defined as the point of pressure in Bar, where the material when subjected to an increasing pressure of 1-2 Bar/sec has lost 5% of its initial volume. The design of subsea buoyancy applications is complex and consideration has to be given to the required buoyancy loss and updrift over the expected lifetime and service conditions, with respect to long and short term hydraulic compressive creep, water absorption and hydraulic fatigue. Please contact Diab Technical Services for design proposal.

Divinycell HM is a high performance structural core designed for fast marine hulls where higher toughness is required. Divinycell HM combines a very high shear strength with an outstanding shear elongation. As a result, Divinycell HM is an extremely tough product, capable of absorbing high dynamic impacts and slamming loads. Divinycell HM´s elongation exceeds the requirements of ISO 12215, GL and ABS rules to allow for reduced safety factors in structural calculations, providing a lighter, yet strong structure. Divinycell HM’s high compressive properties provide excellent resistance to denting and skin wrinkling of thin skins. Divinycell HM offers a high operating temperature, thus reducing the risk of print through on dark hulls.

Divinycell HT is an aerospace core available with comprehensive quality documentation and traceability. Diviniycell HT foam is suitable for pre-preg processing (typical +250°F) as well as wet resin systems and infusion. Furthermore Divinycell HT is also self-extinguishing according to FAR 25.853. Divinycell HT eliminates edge potting and sweep and sand.

Divinycell HT is an aerospace core available with comprehensive quality documentation and traceability. Diviniycell HT foam is suitable for pre-preg processing (typical +250°F) as well as wet resin systems and infusion. Furthermore Divinycell HT is also self-extinguishing according to FAR 25.853. Divinycell HT eliminates edge potting and sweep and sand.

Divinycell PX is based on PET, which makes it to a recyclable, thermoplastic sandwich core material. Divinycell PX provides excellent FST (fire, smoke & toxicity) properties, high temperature performance, very good fatigue properties, good mechanical characteristics and chemical resistance. It also offers excellent acoustic/thermal insulation properties and low water absorption. Divinycell PX is particularly ideal for public transportation and industrial applications. The energy efficiency of a Divinycell PX sandwich makes it ideal for transport applications such as interior paneling, floors and exterior panels for trains, trams, busses and coaches. In the industrial/ construction market, the good mechanical and FST properties of Divinycell PX allows it to be used for a wide variety of applications such as domes, architectural claddings and industrial housings.

Divinycell HT is an aerospace core available with comprehensive quality documentation and traceability. Diviniycell HT foam is suitable for pre-preg processing (typical +250°F) as well as wet resin systems and infusion. Furthermore Divinycell HT is also self-extinguishing according to FAR 25.853. Divinycell HT eliminates edge potting and sweep and sand.

Divinycell HT is an aerospace core available with comprehensive quality documentation and traceability. Diviniycell HT foam is suitable for pre-preg processing (typical +250°F) as well as wet resin systems and infusion. Furthermore Divinycell HT is also self-extinguishing according to FAR 25.853. Divinycell HT eliminates edge potting and sweep and sand.

Divinycell HP has been developed to meet demands in high temperature systems, and low temperature prepreg systems. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell HP´s elevated temperature performance also extends to its ‘in service’ life as it will retain a high percentage of its mechanical properties despite exposure to high ambient temperatures. It offers high properties in all significant areas including mechanical performance, elongation to break, ductility, adhesion/peel strength, fracture toughness and dimensional stability. Other key features of Divinycell HP include excellent chemical resistance, low water absorption and good thermal/acoustic insulation.

Divinycell HT is an aerospace core available with comprehensive quality documentation and traceability. Diviniycell HT foam is suitable for pre-preg processing (typical +250°F) as well as wet resin systems and infusion. Furthermore Divinycell HT is also self-extinguishing according to FAR 25.853. Divinycell HT eliminates edge potting and sweep and sand.

Divinycell HP has been developed to meet demands in high temperature systems, and low temperature prepreg systems. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell HP´s elevated temperature performance also extends to its ‘in service’ life as it will retain a high percentage of its mechanical properties despite exposure to high ambient temperatures. It offers high properties in all significant areas including mechanical performance, elongation to break, ductility, adhesion/peel strength, fracture toughness and dimensional stability. Other key features of Divinycell HP include excellent chemical resistance, low water absorption and good thermal/acoustic insulation.

Divinycell HM is a high performance structural core designed for fast marine hulls where higher toughness is required. Divinycell HM combines a very high shear strength with an outstanding shear elongation. As a result, Divinycell HM is an extremely tough product, capable of absorbing high dynamic impacts and slamming loads. Divinycell HM´s elongation exceeds the requirements of ISO 12215, GL and ABS rules to allow for reduced safety factors in structural calculations, providing a lighter, yet strong structure. Divinycell HM’s high compressive properties provide excellent resistance to denting and skin wrinkling of thin skins. Divinycell HM offers a high operating temperature, thus reducing the risk of print through on dark hulls.

Divinycell HM is a high performance structural core designed for fast marine hulls where higher toughness is required. Divinycell HM combines a very high shear strength with an outstanding shear elongation. As a result, Divinycell HM is an extremely tough product, capable of absorbing high dynamic impacts and slamming loads. Divinycell HM´s elongation exceeds the requirements of ISO 12215, GL and ABS rules to allow for reduced safety factors in structural calculations, providing a lighter, yet strong structure. Divinycell HM’s high compressive properties provide excellent resistance to denting and skin wrinkling of thin skins. Divinycell HM offers a high operating temperature, thus reducing the risk of print through on dark hulls.

Divinycell PX is based on PET, which makes it to a recyclable, thermoplastic sandwich core material. Divinycell PX provides excellent FST (fire, smoke & toxicity) properties, high temperature performance, very good fatigue properties, good mechanical characteristics and chemical resistance. It also offers excellent acoustic/thermal insulation properties and low water absorption. Divinycell PX is particularly ideal for public transportation and industrial applications. The energy efficiency of a Divinycell PX sandwich makes it ideal for transport applications such as interior paneling, floors and exterior panels for trains, trams, busses and coaches. In the industrial/ construction market, the good mechanical and FST properties of Divinycell PX allows it to be used for a wide variety of applications such as domes, architectural claddings and industrial housings.

Divinycell F50 foam is a recyclable, prepreg compatible sandwich core offering excellent Fire, Smoke and Toxicity (FST) properties, good mechanicals and processing characteristics. It meets the US and European regulatory requirements for commercial aircraft interiors. Other key features include vacuum bag processing up to 220°C and matched tooling and press processing up to 220°C, exceptional fatigue life, good chemical resistance and excellent heat aging at 180°C. Divinycell F50 is compatible with most common aerospace composite manufacturing processes.

Divinycell HCP grade meets the demand for a high performance, low density buoyancy material with excellent characteristics. It is widely used in submarines, subsea buoyancy units, ROVs, diving bells and impact protection structures. As a result of its excellent hydraulic compressive properties and closed cell structure, it has very low buoyancy loss and water absorption under long-term loading conditions. HCP stands for Hydraulic Crush Point and is defined as the point of pressure in Bar, where the material when subjected to an increasing pressure of 1-2 Bar/sec has lost 5% of its initial volume. The design of subsea buoyancy applications is complex and consideration has to be given to the required buoyancy loss and updrift over the expected lifetime and service conditions, with respect to long and short term hydraulic compressive creep, water absorption and hydraulic fatigue. Please contact Diab Technical Services for design proposal.

Divinycell HCP grade meets the demand for a high performance, low density buoyancy material with excellent characteristics. It is widely used in submarines, subsea buoyancy units, ROVs, diving bells and impact protection structures. As a result of its excellent hydraulic compressive properties and closed cell structure, it has very low buoyancy loss and water absorption under long-term loading conditions. HCP stands for Hydraulic Crush Point and is defined as the point of pressure in Bar, where the material when subjected to an increasing pressure of 1-2 Bar/sec has lost 5% of its initial volume. The design of subsea buoyancy applications is complex and consideration has to be given to the required buoyancy loss and updrift over the expected lifetime and service conditions, with respect to long and short term hydraulic compressive creep, water absorption and hydraulic fatigue. Please contact Diab Technical Services for design proposal.

Divinycell HP has been developed to meet demands in high temperature systems, and low temperature prepreg systems. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell HP´s elevated temperature performance also extends to its ‘in service’ life as it will retain a high percentage of its mechanical properties despite exposure to high ambient temperatures. It offers high properties in all significant areas including mechanical performance, elongation to break, ductility, adhesion/peel strength, fracture toughness and dimensional stability. Other key features of Divinycell HP include excellent chemical resistance, low water absorption and good thermal/acoustic insulation.

ProBalsa is a high quality organic core material made from end grain balsa wood. The end grain, micro honeycomb structure offers exceptional shear and compressive strength. In addition ProBalsa offers good fatigue properties, high thermal and sound insulation and low FST (fire, smoke & toxicity) properties. ProBalsa is best suited for dynamic structures where performance and efficiency are important. All ProBalsa core materials are particularly easy to work using conventional woodworking tools. It can be drilled, milled, turned and sawn to close tolerances. ProBalsa is compatible with most resin and manufacturing processes. It is also suitable for elevated temperature cure prepreg systems.